Message-ID: <53A14B59.2020907@6wind.com>
Date:	Wed, 18 Jun 2014 10:18:33 +0200
From:	Nicolas Dichtel <nicolas.dichtel@...nd.com>
To:	Ben Greear <greearb@...delatech.com>,
	Dan Williams <dcbw@...hat.com>
CC:	netdev <netdev@...r.kernel.org>
Subject: Re: How is IPv6 dhcp supposed to work?

Le 18/06/2014 01:16, Ben Greear a écrit :
> On 06/17/2014 03:34 PM, Dan Williams wrote:
>> On Tue, 2014-06-17 at 14:41 -0700, Ben Greear wrote:
>>> I'm trying to understand how DHCP for ipv6 is supposed to work.
>>>
>>> I am able to get a global-scope address and prefix from
>>> dhclient, but dhclient is not providing a gateway address.
>>
>> That's because it doesn't; DHCPv6 isn't supposed to be used standalone
>> for global IPv6 connectivity.  That's what router advertisements are
>> for.  The normal flow is this:
>>
>> 1) your router advertisement provides your prefix, prefix length (eg
>> subnet mask), and default gateway/router
>>
>> 2) your prefix gets combined with your local Interface Identifier (often
>> your MAC address or a hashed version of your MAC, or delivered via PPP,
>> or hashed InfiniBand port GUID, or GRE tunnel address, etc) to provide
>> your global IPv6 address.  See
>> net/ipv6/addrconf.c::ipv6_generate_eui64().
>>
>> 3) the RA can also provide search domains, DNS servers, routes, MTU,
>> etc.
>>
>> 4) if there's anything else your administrator really wants to use DHCP
>> for (NTP servers, etc) then they set the M (Managed) or O (Other Config)
>> bits in the router advertisement.
>>
>> 5) In both cases, that requests that the client run DHCPv6; in M mode
>> you do get a lease from the DHCP server and that address becomes
>> preferred, in the O case no lease is obtained but other options can be
>> delivered
>>
>> 6) In all cases, the default gateways (and their respective priorities)
>> are always delivered by Router Advertisements; there can be multiple
>> default gateways in the broadcast domain for redundancy, and the network
>> administrator sets their relative priority.
>>
>>> I see the dhclient interface doing a Router Solicitation, but
>>> I don't see any answers.
>>>
>>> Are we supposed to run radvd or something like that as well?
>>
>> Yes.  If you're not using static addressing, then you must run radvd to
>> deliver router advertisements to your network.  See 'man radvd.conf' for
>> more information on configuring the additional options that DHCP used to
>> be used for (RDNSS, DNSSL, AdvLinkMTU, route, etc).
>>
>>> Or is there some other automated magic that is supposed to
>>> find the default gateway?
>>
>> Router Advertisements via radvd.  You probably want to evaluate whether
>> you really need DHCPv6 at all, since RA can deliver most of the options
>> that people use DHCP for.
>
> Thanks for the detailed answer.  A user told me that 'dhcpv6 didn't work'.
>
> And it doesn't, but I think maybe they were using the equivalent of radvd
> anyway....trying to verify that.
>
> Now, I still have troubles though.  I see the router solicit, and router advertisement,
> but 'ip monitor route' doesn't show any default route being added (and neither does
> the route show up in some other way I know to look.)
>
> I'm using routing rules, veth pairs, and such stuff, and have some local code
> hacks, so maybe it's my fault.  Don't think I've mucked with IPv6 much though...
Naive question, what is the value of accept_ra?
cat /proc/sys/net/ipv6/conf/*/accept_ra

See Documentation/networking/ip-sysctl.txt
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists