Message-ID: <20140619104440.GA17994@omega>
Date:	Thu, 19 Jun 2014 12:44:43 +0200
From:	Alexander Aring <alex.aring@...il.com>
To:	Varka Bhadram <varkabhadram@...il.com>
Cc:	netdev@...r.kernel.org, alex.bluesman.smirnov@...il.com,
	dbaryshkov@...il.com, linux-zigbee-devel@...ts.sourceforge.net,
	linux-kernel@...r.kernel.org, davem@...emloft.net,
	sowjanyap@...c.in, santoshk@...c.in, venkatas@...c.in,
	Varka Bhadram <varkab@...c.in>
Subject: Re: [PATCH net-next v5 1/3] ieee802154: cc2520: adds driver for TI
 CC2520 radio

Hi Varka,

why do you add new features while you trying to get the first version
mainline?

On Thu, Jun 19, 2014 at 02:08:48PM +0530, Varka Bhadram wrote:
> This patch adds the driver support for the cc2520 radio.
> 
> Driver support:
> 	- Tx and Rx of IEEE-802.15.4 packets.
> 	- Energy Detection on channel.
> 	- Setting the Channel for the radio. [b/w 11 - 26 channels]
> 	- Start and Stop the radio
> 	- h/w address filtering.
> 
> Signed-off-by: Varka Bhadram <varkab@...c.in>
> ---
>  drivers/net/ieee802154/cc2520.c | 1022 +++++++++++++++++++++++++++++++++++++++
>  include/linux/spi/cc2520.h      |   26 +
>  2 files changed, 1048 insertions(+)
>  create mode 100644 drivers/net/ieee802154/cc2520.c
>  create mode 100644 include/linux/spi/cc2520.h
> 
> diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
> new file mode 100644
> index 0000000..be74247
> --- /dev/null
> +++ b/drivers/net/ieee802154/cc2520.c
> @@ -0,0 +1,1022 @@
> +/* Driver for TI CC2520 802.15.4 Wireless-PAN Networking controller
> + *
> + * Copyright (C) 2014 Varka Bhadram <varkab@...c.in>
> + *		      Md.Jamal Mohiuddin <mjmohiuddin@...c.in>
> + *		      P Sowjanya <sowjanyap@...c.in>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/cc2520.h>
> +#include <linux/workqueue.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/skbuff.h>
> +
> +#include <linux/pinctrl/consumer.h>
> +
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_gpio.h>
> +
> +#include <net/mac802154.h>
> +#include <net/wpan-phy.h>
> +
> +#define	SPI_COMMAND_BUFFER	3
> +#define	HIGH			1
> +#define	LOW			0
> +#define	STATE_IDLE		0
> +#define	RSSI_VALID		0
> +#define	RSSI_OFFSET		78
> +
> +#define	CC2520_RAM_SIZE		640
> +#define	CC2520_FIFO_SIZE	128
> +
> +#define	CC2520RAM_TXFIFO	0x100
> +#define	CC2520RAM_RXFIFO	0x180
> +#define	CC2520RAM_IEEEADDR	0x3EA
> +#define	CC2520RAM_PANID		0x3F2
> +#define	CC2520RAM_SHORTADDR	0x3F4
> +
> +#define	CC2520_FREG_MASK	0x3F
> +
> +/*status byte values */
> +#define	CC2520_STATUS_XOSC32M_STABLE	(1 << 7)
> +#define	CC2520_STATUS_RSSI_VALID	(1 << 6)
> +#define	CC2520_STATUS_TX_UNDERFLOW	(1 << 3)
> +
> +/*IEEE 802.15.4 defined constants (2.4 GHz logical channels) */
> +#define	CC2520_MINCHANNEL		11
> +#define	CC2520_MAXCHANNEL		26
> +#define	CC2520_CHANNEL_SPACING		5
> +
> +/*command strobes*/
> +#define	CC2520_CMD_SNOP			0x00
> +#define	CC2520_CMD_IBUFLD		0x02
> +#define	CC2520_CMD_SIBUFEX		0x03
> +#define	CC2520_CMD_SSAMPLECCA		0x04
> +#define	CC2520_CMD_SRES			0x0f
> +#define	CC2520_CMD_MEMORY_MASK		0x0f
> +#define	CC2520_CMD_MEMORY_READ		0x10
> +#define	CC2520_CMD_MEMORY_WRITE		0x20
> +#define	CC2520_CMD_RXBUF		0x30
> +#define	CC2520_CMD_RXBUFCP		0x38
> +#define	CC2520_CMD_RXBUFMOV		0x32
> +#define	CC2520_CMD_TXBUF		0x3A
> +#define	CC2520_CMD_TXBUFCP		0x3E
> +#define	CC2520_CMD_RANDOM		0x3C
> +#define	CC2520_CMD_SXOSCON		0x40
> +#define	CC2520_CMD_STXCAL		0x41
> +#define	CC2520_CMD_SRXON		0x42
> +#define	CC2520_CMD_STXON		0x43
> +#define	CC2520_CMD_STXONCCA		0x44
> +#define	CC2520_CMD_SRFOFF		0x45
> +#define	CC2520_CMD_SXOSCOFF		0x46
> +#define	CC2520_CMD_SFLUSHRX		0x47
> +#define	CC2520_CMD_SFLUSHTX		0x48
> +#define	CC2520_CMD_SACK			0x49
> +#define	CC2520_CMD_SACKPEND		0x4A
> +#define	CC2520_CMD_SNACK		0x4B
> +#define	CC2520_CMD_SRXMASKBITSET	0x4C
> +#define	CC2520_CMD_SRXMASKBITCLR	0x4D
> +#define	CC2520_CMD_RXMASKAND		0x4E
> +#define	CC2520_CMD_RXMASKOR		0x4F
> +#define	CC2520_CMD_MEMCP		0x50
> +#define	CC2520_CMD_MEMCPR		0x52
> +#define	CC2520_CMD_MEMXCP		0x54
> +#define	CC2520_CMD_MEMXWR		0x56
> +#define	CC2520_CMD_BCLR			0x58
> +#define	CC2520_CMD_BSET			0x59
> +#define	CC2520_CMD_CTR_UCTR		0x60
> +#define	CC2520_CMD_CBCMAC		0x64
> +#define	CC2520_CMD_UCBCMAC		0x66
> +#define	CC2520_CMD_CCM			0x68
> +#define	CC2520_CMD_UCCM			0x6A
> +#define	CC2520_CMD_ECB			0x70
> +#define	CC2520_CMD_ECBO			0x72
> +#define	CC2520_CMD_ECBX			0x74
> +#define	CC2520_CMD_INC			0x78
> +#define	CC2520_CMD_ABORT		0x7F
> +#define	CC2520_CMD_REGISTER_READ	0x80
> +#define	CC2520_CMD_REGISTER_WRITE	0xC0
> +
> +/* status registers */
> +#define	CC2520_CHIPID			0x40
> +#define	CC2520_VERSION			0x42
> +#define	CC2520_EXTCLOCK			0x44
> +#define	CC2520_MDMCTRL0			0x46
> +#define	CC2520_MDMCTRL1			0x47
> +#define	CC2520_FREQEST			0x48
> +#define	CC2520_RXCTRL			0x4A
> +#define	CC2520_FSCTRL			0x4C
> +#define	CC2520_FSCAL0			0x4E
> +#define	CC2520_FSCAL1			0x4F
> +#define	CC2520_FSCAL2			0x50
> +#define	CC2520_FSCAL3			0x51
> +#define	CC2520_AGCCTRL0			0x52
> +#define	CC2520_AGCCTRL1			0x53
> +#define	CC2520_AGCCTRL2			0x54
> +#define	CC2520_AGCCTRL3			0x55
> +#define	CC2520_ADCTEST0			0x56
> +#define	CC2520_ADCTEST1			0x57
> +#define	CC2520_ADCTEST2			0x58
> +#define	CC2520_MDMTEST0			0x5A
> +#define	CC2520_MDMTEST1			0x5B
> +#define	CC2520_DACTEST0			0x5C
> +#define	CC2520_DACTEST1			0x5D
> +#define	CC2520_ATEST			0x5E
> +#define	CC2520_DACTEST2			0x5F
> +#define	CC2520_PTEST0			0x60
> +#define	CC2520_PTEST1			0x61
> +#define	CC2520_RESERVED			0x62
> +#define	CC2520_DPUBIST			0x7A
> +#define	CC2520_ACTBIST			0x7C
> +#define	CC2520_RAMBIST			0x7E
> +
> +/*frame registers*/
> +#define	CC2520_FRMFILT0			0x00
> +#define	CC2520_FRMFILT1			0x01
> +#define	CC2520_SRCMATCH			0x02
> +#define	CC2520_SRCSHORTEN0		0x04
> +#define	CC2520_SRCSHORTEN1		0x05
> +#define	CC2520_SRCSHORTEN2		0x06
> +#define	CC2520_SRCEXTEN0		0x08
> +#define	CC2520_SRCEXTEN1		0x09
> +#define	CC2520_SRCEXTEN2		0x0A
> +#define	CC2520_FRMCTRL0			0x0C
> +#define	CC2520_FRMCTRL1			0x0D
> +#define	CC2520_RXENABLE0		0x0E
> +#define	CC2520_RXENABLE1		0x0F
> +#define	CC2520_EXCFLAG0			0x10
> +#define	CC2520_EXCFLAG1			0x11
> +#define	CC2520_EXCFLAG2			0x12
> +#define	CC2520_EXCMASKA0		0x14
> +#define	CC2520_EXCMASKA1		0x15
> +#define	CC2520_EXCMASKA2		0x16
> +#define	CC2520_EXCMASKB0		0x18
> +#define	CC2520_EXCMASKB1		0x19
> +#define	CC2520_EXCMASKB2		0x1A
> +#define	CC2520_EXCBINDX0		0x1C
> +#define	CC2520_EXCBINDX1		0x1D
> +#define	CC2520_EXCBINDY0		0x1E
> +#define	CC2520_EXCBINDY1		0x1F
> +#define	CC2520_GPIOCTRL0		0x20
> +#define	CC2520_GPIOCTRL1		0x21
> +#define	CC2520_GPIOCTRL2		0x22
> +#define	CC2520_GPIOCTRL3		0x23
> +#define	CC2520_GPIOCTRL4		0x24
> +#define	CC2520_GPIOCTRL5		0x25
> +#define	CC2520_GPIOPOLARITY		0x26
> +#define	CC2520_GPIOCTRL			0x28
> +#define	CC2520_DPUCON			0x2A
> +#define	CC2520_DPUSTAT			0x2C
> +#define	CC2520_FREQCTRL			0x2E
> +#define	CC2520_FREQTUNE			0x2F
> +#define	CC2520_TXPOWER			0x30
> +#define	CC2520_TXCTRL			0x31
> +#define	CC2520_FSMSTAT0			0x32
> +#define	CC2520_FSMSTAT1			0x33
> +#define	CC2520_FIFOPCTRL		0x34
> +#define	CC2520_FSMCTRL			0x35
> +#define	CC2520_CCACTRL0			0x36
> +#define	CC2520_CCACTRL1			0x37
> +#define	CC2520_RSSI			0x38
> +#define	CC2520_RSSISTAT			0x39
> +#define	CC2520_RXFIRST			0x3C
> +#define	CC2520_RXFIFOCNT		0x3E
> +#define	CC2520_TXFIFOCNT		0x3F
> +
> +/* Driver private information */
> +struct cc2520_private {
> +	struct spi_device *spi;		/* spi device structure */
> +	struct ieee802154_dev *dev;	/* Ieee802.15.4 device */
> +	u8 *buf;			/* SPI TX/Rx data buffer */
> +	struct mutex buffer_mutex;	/* SPI buffer mutex */
> +	unsigned is_tx:1;		/* Flag for sync b/w Tx and Rx */
> +	int fifo_pin;			/* FIFO GPIO pin number */
> +	struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
> +	spinlock_t lock;		/* Spin lock */
> +	struct completion tx_complete;	/* Work completion for Tx */
> +};
> +
> +/* Generic Functions */
> +static int
> +cc2520_cmd_strobe(struct cc2520_private *priv, u8 cmd)
> +{
> +	int ret;
> +	u8 status = 0xff;
> +	struct spi_message msg;
> +	struct spi_transfer xfer = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer.len++] = cmd;
> +	dev_vdbg(&priv->spi->dev,
> +		 "command strobe buf[0] = %02x\n",
> +		 priv->buf[0]);
> +
> +	ret = spi_sync(priv->spi, &msg);
> +	if (!ret)
> +		status = priv->buf[0];
> +	dev_vdbg(&priv->spi->dev,
> +		 "buf[0] = %02x\n", priv->buf[0]);
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return ret;
> +}
> +
> +static int
> +cc2520_get_status(struct cc2520_private *priv, u8 *status)
> +{
> +	int ret;
> +	struct spi_message msg;
> +	struct spi_transfer xfer = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer.len++] = CC2520_CMD_SNOP;
> +	dev_vdbg(&priv->spi->dev,
> +		 "get status command buf[0] = %02x\n", priv->buf[0]);
> +
> +	ret = spi_sync(priv->spi, &msg);
> +	if (!ret)
> +		*status = priv->buf[0];
> +	dev_vdbg(&priv->spi->dev,
> +		 "buf[0] = %02x\n", priv->buf[0]);
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return ret;
> +}
> +
> +static int
> +cc2520_write_register(struct cc2520_private *priv, u8 reg, u8 value)
> +{
> +	int status;
> +	struct spi_message msg;
> +	struct spi_transfer xfer = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +
> +	if (reg <= CC2520_FREG_MASK) {
> +		priv->buf[xfer.len++] = CC2520_CMD_REGISTER_WRITE | reg;
> +		priv->buf[xfer.len++] = value;
> +	} else {
> +		priv->buf[xfer.len++] = CC2520_CMD_MEMORY_WRITE;
> +		priv->buf[xfer.len++] = reg;
> +		priv->buf[xfer.len++] = value;
> +	}
> +	status = spi_sync(priv->spi, &msg);
> +	if (msg.status)
> +		status = msg.status;
> +
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int
> +cc2520_write_ram(struct cc2520_private *priv, u16 reg, u8 len, u8 *data)
> +{
> +	int status;
> +	struct spi_message msg;
> +	struct spi_transfer xfer_head = {
> +		.len        = 0,
> +		.tx_buf        = priv->buf,
> +		.rx_buf        = priv->buf,
> +	};
> +
> +	struct spi_transfer xfer_buf = {
> +		.len = len,
> +		.tx_buf = data,
> +	};
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer_head.len++] = (CC2520_CMD_MEMORY_WRITE | ((reg >> 8) & 0xff));
> +	priv->buf[xfer_head.len++] = reg & 0xff;
> +	
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer_head, &msg);
> +	spi_message_add_tail(&xfer_buf, &msg);
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_dbg(&priv->spi->dev, "spi status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +
> +	mutex_unlock(&priv->buffer_mutex);
> +	return status;
> +}
> +
> +static int
> +cc2520_read_register(struct cc2520_private *priv, u8 reg, u8 *data)
> +{
> +	int status;
> +	struct spi_message msg;
> +	struct spi_transfer xfer1 = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	struct spi_transfer xfer2 = {
> +		.len = 1,
> +		.rx_buf = data,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer1, &msg);
> +	spi_message_add_tail(&xfer2, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer1.len++] = CC2520_CMD_MEMORY_READ;
> +	priv->buf[xfer1.len++] = reg;
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_dbg(&priv->spi->dev,
> +		"spi status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int
> +cc2520_write_txfifo(struct cc2520_private *priv, u8 *data, u8 len)
> +{
> +	int status;
> +
> +	/*
> +	 *length byte must include FCS even
> +	 *if it is calculated in the hardware
> +	 */
> +	int len_byte = len + 2;
> +
> +	struct spi_message msg;
> +
> +	struct spi_transfer xfer_head = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +	struct spi_transfer xfer_len = {
> +		.len = 1,
> +		.tx_buf = &len_byte,
> +	};
> +	struct spi_transfer xfer_buf = {
> +		.len = len,
> +		.tx_buf = data,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer_head, &msg);
> +	spi_message_add_tail(&xfer_len, &msg);
> +	spi_message_add_tail(&xfer_buf, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer_head.len++] = CC2520_CMD_TXBUF;
> +	dev_vdbg(&priv->spi->dev,
> +		 "TX_FIFO cmd buf[0] = %02x\n", priv->buf[0]);
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	dev_vdbg(&priv->spi->dev, "buf[0] = %02x\n", priv->buf[0]);
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int
> +cc2520_read_rxfifo(struct cc2520_private *priv, u8 *data, u8 len, u8 *lqi)
> +{
> +	int status;
> +	struct spi_message msg;
> +
> +	struct spi_transfer xfer_head = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +	struct spi_transfer xfer_buf = {
> +		.len = len,
> +		.rx_buf = data,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer_head, &msg);
> +	spi_message_add_tail(&xfer_buf, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer_head.len++] = CC2520_CMD_RXBUF;
> +
> +	dev_vdbg(&priv->spi->dev, "read rxfifo buf[0] = %02x\n", priv->buf[0]);
> +	dev_vdbg(&priv->spi->dev, "buf[1] = %02x\n", priv->buf[1]);
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	dev_vdbg(&priv->spi->dev,
> +		 "return status buf[0] = %02x\n", priv->buf[0]);
> +	dev_vdbg(&priv->spi->dev, "length buf[1] = %02x\n", priv->buf[1]);
> +
> +	*lqi = data[priv->buf[1] - 1] & 0x7f;

This is a little bit critical... but I know others driver doesn't check
also on this.

After the cc2520_read_rxfifo you check if (len < 2 ...) but here you
already use the len. Maybe but the length constraints check in this function.

> +
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int cc2520_start(struct ieee802154_dev *dev)
> +{
> +	return cc2520_cmd_strobe(dev->priv, CC2520_CMD_SRXON);
> +}
> +
> +static void cc2520_stop(struct ieee802154_dev *dev)
> +{
> +	cc2520_cmd_strobe(dev->priv, CC2520_CMD_SRFOFF);
> +}
> +
> +static int
> +cc2520_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +	unsigned long flags;
> +	int rc;
> +	u8 status = 0;
> +
> +	rc = cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
> +	if (rc)
> +		goto err_tx;
> +
> +	rc = cc2520_write_txfifo(priv, skb->data, skb->len);
> +	if (rc)
> +		goto err_tx;
> +
> +	rc = cc2520_get_status(priv, &status);
> +	if (rc)
> +		goto err_tx;
> +
> +	if (status & CC2520_STATUS_TX_UNDERFLOW) {
> +		dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n");
> +		goto err_tx;
> +	}
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	BUG_ON(priv->is_tx);
> +	priv->is_tx = 1;
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	rc = cc2520_cmd_strobe(priv, CC2520_CMD_STXONCCA);
> +	if (rc)
> +		goto err;
> +
> +	rc = wait_for_completion_interruptible(&priv->tx_complete);
> +	if (rc < 0)
> +		goto err;
> +
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SRXON);
> +
> +	return rc;
> +err:
> +	spin_lock_irqsave(&priv->lock, flags);
> +	priv->is_tx = 0;
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +err_tx:
> +	return rc;
> +}
> +
> +
> +static int cc2520_rx(struct cc2520_private *priv)
> +{
> +	u8 len = 0, lqi = 0, bytes = 1;
> +	struct sk_buff *skb;
> +
> +	cc2520_read_rxfifo(priv, &len, bytes, &lqi);

Okay, you get here the length for your pdu. But then you can check
afterwards on:

if (len < 2) instead of doing this in the second rxfifo call. And please
do a:

if (len < 2 || len > IEEE802154_MTU)

The reason is, I don't know if your chip does filter something like
that. The at86rf230 don't filter pdu above the MTU size and we have no
generic mac802154 layer function right now to check on this. I like to
improve that in the near future...

When you do this check you can save the kfree_skb in this branch.

> +
> +	skb = alloc_skb(len, GFP_KERNEL);
> +	if (!skb)
> +		return -ENOMEM;
> +
> +	cc2520_read_rxfifo(priv, skb_put(skb, len), len, &lqi);
> +	if (len < 2) {
> +		kfree_skb(skb);
> +		return -EINVAL;
> +	}
> +
> +	skb_trim(skb, skb->len - 2);
> +
> +	ieee802154_rx_irqsafe(priv->dev, skb, lqi);
> +
> +	dev_vdbg(&priv->spi->dev, "RXFIFO: %x %x\n", len, lqi);
> +
> +	return 0;
> +}
> +
> +static int
> +cc2520_ed(struct ieee802154_dev *dev, u8 *level)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +	u8 status = 0xff;
> +	u8 rssi;
> +	int ret;
> +
> +	ret = cc2520_read_register(priv , CC2520_RSSISTAT, &status);
> +	if (ret)
> +		return ret;
> +
> +	if (status != RSSI_VALID) {
> +		ret = -EINVAL;
> +		return ret;

return -EINVAL;

> +	}
> +
> +	ret = cc2520_read_register(priv , CC2520_RSSI, &rssi);
> +	if (ret)
> +		return ret;
> +
> +	/* level = RSSI(rssi) - OFFSET [dBm] : offset is 76dBm*/
> +	*level = rssi - RSSI_OFFSET;
> +
> +	return ret;
> +}
> +
> +static int
> +cc2520_set_channel(struct ieee802154_dev *dev, int page, int channel)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +	int ret;
> +
> +	might_sleep();
> +	dev_dbg(&priv->spi->dev, "trying to set channel\n");
> +
> +	BUG_ON(page != 0);
> +	BUG_ON(channel < CC2520_MINCHANNEL);
> +	BUG_ON(channel > CC2520_MAXCHANNEL);
> +
> +	ret = cc2520_write_register(priv, CC2520_FREQCTRL,
> +				    11 + 5*(channel - 11));
> +
> +	return ret;
> +}
> +
> +static int 
> +cc2520_filter(struct ieee802154_dev *dev,
> +	      struct ieee802154_hw_addr_filt *filt, unsigned long changed)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +
> +	if (changed & IEEE802515_AFILT_PANID_CHANGED) {
> +		u8 panid[2];
> +		panid[0] = filt->pan_id & 0xff;
> +		panid[1] = filt->pan_id >> 8;

const u16 panid = le16_to_cpu(filt->pan_id);

> +		cc2520_write_ram(priv, CC2520RAM_PANID, sizeof(panid), panid);
> +	}
> +
> +	if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) 
> +		cc2520_write_ram(priv, CC2520RAM_IEEEADDR,
> +				sizeof(filt->ieee_addr), (u8 *)&filt->ieee_addr);
> +
> +	return 0;
> +
> +}

What's about to handle IEEE802515_AFILT_PANC_CHANGED and
IEEE802515_AFILT_SADDR_CHANGED? These are fully ignored, your chip
should have such functions.

If you don't support them you need to return -EOPNOTSUPP; but this would
be weird because you have a IEEE 802.15.4 complaint chip. :-)

> +
> +static struct ieee802154_ops cc2520_ops = {
> +	.owner = THIS_MODULE,
> +	.start = cc2520_start,
> +	.stop = cc2520_stop,
> +	.xmit = cc2520_tx,
> +	.ed = cc2520_ed,
> +	.set_channel = cc2520_set_channel,
> +	.set_hw_addr_filt = cc2520_filter,
> +};
> +
> +static int cc2520_register(struct cc2520_private *priv)
> +{
> +	int ret = -ENOMEM;
> +
> +	priv->dev = ieee802154_alloc_device(sizeof(*priv), &cc2520_ops);
> +	if (!priv->dev)
> +		goto err_ret;
> +
> +	priv->dev->priv = priv;
> +	priv->dev->parent = &priv->spi->dev;
> +	priv->dev->extra_tx_headroom = 0;
> +
> +	/* We do support only 2.4 Ghz */
> +	priv->dev->phy->channels_supported[0] = 0x7FFF800;
> +	priv->dev->flags = IEEE802154_HW_OMIT_CKSUM;
> +
> +	dev_vdbg(&priv->spi->dev, "registered cc2520\n");
> +	ret = ieee802154_register_device(priv->dev);
> +	if (ret)
> +		goto err_free_device;
> +
> +	return 0;
> +
> +err_free_device:
> +	ieee802154_free_device(priv->dev);
> +err_ret:
> +	return ret;
> +}
> +
> +static void cc2520_fifop_irqwork(struct work_struct *work)
> +{
> +	struct cc2520_private *priv
> +		= container_of(work, struct cc2520_private, fifop_irqwork);
> +
> +	dev_dbg(&priv->spi->dev, "fifop interrupt received\n");
> +
> +	if (gpio_get_value(priv->fifo_pin))
> +		cc2520_rx(priv);
> +	else
> +		dev_dbg(&priv->spi->dev, "rxfifo overflow\n");
> +
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
> +}
> +
> +static irqreturn_t cc2520_fifop_isr(int irq, void *data)
> +{
> +	struct cc2520_private *priv = data;
> +
> +	schedule_work(&priv->fifop_irqwork);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t cc2520_sfd_isr(int irq, void *data)
> +{
> +	struct cc2520_private *priv = data;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	if (priv->is_tx) {
> +		priv->is_tx = 0;
> +		spin_unlock_irqrestore(&priv->lock, flags);
> +		dev_dbg(&priv->spi->dev, "SFD for TX\n");
> +		complete(&priv->tx_complete);
> +	} else {
> +		spin_unlock_irqrestore(&priv->lock, flags);
> +		dev_dbg(&priv->spi->dev, "SFD for RX\n");
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int cc2520_hw_init(struct cc2520_private *priv)
> +{
> +	u8 status = 0, state = 0xff;
> +	int ret;
> +	int timeout = 100;
> +
> +	ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
> +	if (ret)
> +		goto err_ret;
> +
> +	if (state != STATE_IDLE)
> +		return -EINVAL;
> +
> +	do {
> +		ret = cc2520_get_status(priv, &status);
> +		if (ret)
> +			goto err_ret;
> +
> +		if (timeout-- <= 0) {
> +			dev_err(&priv->spi->dev, "oscillator start failed!\n");
> +			return ret;
> +		}
> +		udelay(1);
> +	} while (!(status & CC2520_STATUS_XOSC32M_STABLE));
> +
> +	dev_vdbg(&priv->spi->dev, "oscillator successfully brought up\n");
> +
> +	/*Registers default value: section 28.1 in Datasheet*/
> +	ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_MDMCTRL0, 0x85);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_MDMCTRL1, 0x14);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_RXCTRL, 0x3f);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FSCTRL, 0x5a);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FSCAL1, 0x2b);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_ADCTEST1, 0x0e);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_ADCTEST2, 0x03);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FRMCTRL0, 0x60);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FRMCTRL1, 0x03);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FRMFILT0, 0x00);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FIFOPCTRL, 127);
> +	if (ret)
> +		goto err_ret;
> +
> +	return 0;
> +
> +err_ret:
> +	return ret;
> +}
> +
> +static struct cc2520_platform_data *
> +cc2520_get_platform_data(struct spi_device *spi)
> +{
> +	struct cc2520_platform_data *pdata;
> +	struct device_node *np = spi->dev.of_node;
> +	struct cc2520_private *priv = spi_get_drvdata(spi);
> +
> +	if (!np)
> +		return spi->dev.platform_data;
> +
> +	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		goto done;
> +
> +	pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
> +	priv->fifo_pin = pdata->fifo;
> +
> +	pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
> +
> +	pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
> +	pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
> +	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
> +	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
> +
> +	spi->dev.platform_data = pdata;
> +
> +done:
> +	return pdata;
> +}
> +
> +static int cc2520_probe(struct spi_device *spi)
> +{
> +	struct cc2520_private *priv;
> +	struct pinctrl *pinctrl;
> +	struct cc2520_platform_data *pdata;
> +	int ret;
> +
> +	priv = devm_kzalloc(&spi->dev,
> +			    sizeof(struct cc2520_private), GFP_KERNEL);
> +	if (!priv) {
> +		ret = -ENOMEM;
> +		goto err_ret;
> +	}
> +
> +	spi_set_drvdata(spi, priv);
> +
> +	pinctrl = devm_pinctrl_get_select_default(&spi->dev);
> +	if (IS_ERR(pinctrl))
> +		dev_warn(&spi->dev,
> +			 "pinctrl pins are not configured from the driver");

My english is bad, but do we need a s/from/for?

> +
> +	pdata = cc2520_get_platform_data(spi);
> +	if (!pdata) {
> +		dev_err(&spi->dev, "no platform data\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->spi = spi;
> +
> +	priv->buf = devm_kzalloc(&spi->dev,
> +				 SPI_COMMAND_BUFFER, GFP_KERNEL);
> +	if (!priv->buf) {
> +		ret = -ENOMEM;
> +		goto err_ret;
> +	}
> +
> +	mutex_init(&priv->buffer_mutex);
> +	INIT_WORK(&priv->fifop_irqwork, cc2520_fifop_irqwork);
> +	spin_lock_init(&priv->lock);
> +	init_completion(&priv->tx_complete);
> +
> +	/* Request all the gpio's */
> +	if (!gpio_is_valid(pdata->fifo)) {
> +		dev_err(&spi->dev, "fifo gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	}
> +
> +	ret = devm_gpio_request_one(&spi->dev, pdata->fifo,
> +				    GPIOF_IN, "fifo");
> +	if (ret)
> +		goto err_hw_init;
> +
> +	if (!gpio_is_valid(pdata->cca)) {
> +		dev_err(&spi->dev, "cca gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	}
> +
> +	ret = devm_gpio_request_one(&spi->dev, pdata->cca,
> +				    GPIOF_IN, "cca");
> +	if (ret)
> +		goto err_hw_init;
> +
> +	if (!gpio_is_valid(pdata->fifop)) {
> +		dev_err(&spi->dev, "fifop gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	}
> +
> +	ret = devm_gpio_request_one(&spi->dev, pdata->fifop,
> +				    GPIOF_IN, "fifop");
> +	if (ret)
> +		goto err_hw_init;
> +
> +	if (!gpio_is_valid(pdata->sfd)) {
> +		dev_err(&spi->dev, "sfd gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	}
> +
> +	ret = devm_gpio_request_one(&spi->dev, pdata->sfd,
> +				    GPIOF_IN, "sfd");
> +	if (ret)
> +		goto err_hw_init;
> +
> +	if (!gpio_is_valid(pdata->reset)) {
> +		dev_err(&spi->dev, "reset gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	}
> +
> +	ret = devm_gpio_request_one(&spi->dev, pdata->reset,
> +				    GPIOF_OUT_INIT_LOW, "reset");
> +	if (ret)
> +		goto err_hw_init;
> +
> +	if (!gpio_is_valid(pdata->vreg)) {
> +		dev_err(&spi->dev, "vreg gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	}
> +
> +	ret = devm_gpio_request_one(&spi->dev, pdata->vreg,
> +				    GPIOF_OUT_INIT_LOW, "vreg");
> +	if (ret)
> +		goto err_hw_init;
> +
> +
> +	gpio_set_value(pdata->vreg, HIGH);
> +	udelay(100);
> +
> +	gpio_set_value(pdata->reset, HIGH);
> +	udelay(200);
> +
> +	ret = cc2520_hw_init(priv);
> +	if (ret)
> +		goto err_hw_init;
> +
> +	/* Set up fifop interrupt */
> +	ret = devm_request_irq(&spi->dev,
> +			       gpio_to_irq(pdata->fifop),
> +			       cc2520_fifop_isr,
> +			       IRQF_TRIGGER_RISING,
> +			       dev_name(&spi->dev),
> +			       priv);
> +	if (ret) {
> +		dev_err(&spi->dev, "could not get fifop irq\n");
> +		goto err_hw_init;
> +	}
> +
> +	/* Set up sfd interrupt */
> +	ret = devm_request_irq(&spi->dev,
> +			       gpio_to_irq(pdata->sfd),
> +			       cc2520_sfd_isr,
> +			       IRQF_TRIGGER_FALLING,
> +			       dev_name(&spi->dev),
> +			       priv);
> +	if (ret) {
> +		dev_err(&spi->dev, "could not get sfd irq\n");
> +		goto err_hw_init;
> +	}
> +
> +	ret = cc2520_register(priv);
> +	if (ret)
> +		goto err_hw_init;
> +
> +	return 0;
> +
> +err_hw_init:
> +	mutex_destroy(&priv->buffer_mutex);
> +	flush_work(&priv->fifop_irqwork);
> +
> +err_ret:
> +	return ret;
> +}
> +
> +static int cc2520_remove(struct spi_device *spi)
> +{
> +	struct cc2520_private *priv = spi_get_drvdata(spi);
> +
> +	ieee802154_unregister_device(priv->dev);
> +	ieee802154_free_device(priv->dev);
> +
> +	mutex_destroy(&priv->buffer_mutex);
> +	flush_work(&priv->fifop_irqwork);
> +
> +	return 0;
> +}
> +
> +static const struct spi_device_id cc2520_ids[] = {
> +	{"cc2520", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(spi, cc2520_ids);
> +
> +static const struct of_device_id cc2520_of_ids[] = {
> +	{.compatible = "ti,cc2520", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, cc2520_of_ids);
> +
> +/*SPI driver structure*/
> +static struct spi_driver cc2520_driver = {
> +	.driver = {
> +		.name = "cc2520",
> +		.bus = &spi_bus_type,
> +		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(cc2520_of_ids),
> +	},
> +	.id_table = cc2520_ids,
> +	.probe = cc2520_probe,
> +	.remove = cc2520_remove,
> +};
> +module_spi_driver(cc2520_driver);
> +
> +MODULE_AUTHOR("Varka Bhadram <varkab@...c.in>");
> +MODULE_DESCRIPTION("CC2520 Transceiver Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/spi/cc2520.h b/include/linux/spi/cc2520.h
> new file mode 100644
> index 0000000..85b8ee6
> --- /dev/null
> +++ b/include/linux/spi/cc2520.h
> @@ -0,0 +1,26 @@
> +/* Header file for cc2520 radio driver
> + *
> + * Copyright (C) 2014 Varka Bhadram <varkab@...c.in>
> + *                    Md.Jamal Mohiuddin <mjmohiuddin@...c.in>
> + *                    P Sowjanya <sowjanyap@...c.in>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#ifndef __CC2520_H
> +#define __CC2520_H
> +
> +struct cc2520_platform_data {
> +	int fifo;
> +	int fifop;
> +	int cca;
> +	int sfd;
> +	int reset;
> +	int vreg;
> +};
> +
> +#endif
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists