| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1404339655-8456-4-git-send-email-alex.aring@gmail.com>
Date: Thu, 3 Jul 2014 00:20:45 +0200
From: Alexander Aring <alex.aring@...il.com>
To: alex.bluesman.smirnov@...il.com
Cc: dbaryshkov@...il.com, linux-zigbee-devel@...ts.sourceforge.net,
netdev@...r.kernel.org, stilwellt@...nlabs.co,
Alexander Aring <alex.aring@...il.com>
Subject: [PATCH v3 net-next 03/13] at86rf230: rework detect device handling
This patch drops the current lowlevel spi calls for the detect device
function instead we handle this via regmap. Also put the detection of
in a seperate function and set all device specific attributes while detection.
Signed-off-by: Alexander Aring <alex.aring@...il.com>
---
drivers/net/ieee802154/at86rf230.c | 183 +++++++++++++++----------------------
1 file changed, 76 insertions(+), 107 deletions(-)
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index e369703..7d96cd4 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -410,57 +410,6 @@ static struct regmap_config at86rf230_regmap_spi_config = {
};
static int
-__at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part,
- u8 *version)
-{
- u8 data[4];
- u8 *buf = kmalloc(2, GFP_KERNEL);
- int status;
- struct spi_message msg;
- struct spi_transfer xfer = {
- .len = 2,
- .tx_buf = buf,
- .rx_buf = buf,
- };
- u8 reg;
-
- if (!buf)
- return -ENOMEM;
-
- for (reg = RG_PART_NUM; reg <= RG_MAN_ID_1; reg++) {
- buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
- buf[1] = 0xff;
- dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- status = spi_sync(spi, &msg);
- dev_vdbg(&spi->dev, "status = %d\n", status);
- if (msg.status)
- status = msg.status;
-
- dev_vdbg(&spi->dev, "status = %d\n", status);
- dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]);
- dev_vdbg(&spi->dev, "buf[1] = %02x\n", buf[1]);
-
- if (status == 0)
- data[reg - RG_PART_NUM] = buf[1];
- else
- break;
- }
-
- if (status == 0) {
- *part = data[0];
- *version = data[1];
- *man_id = (data[3] << 8) | data[2];
- }
-
- kfree(buf);
-
- return status;
-}
-
-static int
at86rf230_write_fbuf(struct at86rf230_local *lp, u8 *data, u8 len)
{
u8 *buf = lp->buf;
@@ -1080,18 +1029,87 @@ done:
return pdata;
}
+static int
+at86rf230_detect_device(struct at86rf230_local *lp)
+{
+ unsigned int part, version, val;
+ u16 man_id = 0;
+ const char *chip;
+ int rc;
+
+ rc = __at86rf230_read(lp, RG_MAN_ID_0, &val);
+ if (rc)
+ return rc;
+ man_id |= val;
+
+ rc = __at86rf230_read(lp, RG_MAN_ID_1, &val);
+ if (rc)
+ return rc;
+ man_id |= (val << 8);
+
+ rc = __at86rf230_read(lp, RG_PART_NUM, &part);
+ if (rc)
+ return rc;
+
+ rc = __at86rf230_read(lp, RG_PART_NUM, &version);
+ if (rc)
+ return rc;
+
+ if (man_id != 0x001f) {
+ dev_err(&lp->spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
+ man_id >> 8, man_id & 0xFF);
+ return -EINVAL;
+ }
+
+ lp->part = part;
+ lp->vers = version;
+ lp->dev->extra_tx_headroom = 0;
+ lp->dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
+ IEEE802154_HW_TXPOWER | IEEE802154_HW_CSMA;
+
+ switch (part) {
+ case 2:
+ chip = "at86rf230";
+ rc = -ENOTSUPP;
+ break;
+ case 3:
+ chip = "at86rf231";
+ lp->dev->phy->channels_supported[0] = 0x7FFF800;
+ break;
+ case 7:
+ chip = "at86rf212";
+ if (version == 1) {
+ lp->dev->flags |= IEEE802154_HW_LBT;
+ lp->dev->phy->channels_supported[0] = 0x00007FF;
+ lp->dev->phy->channels_supported[2] = 0x00007FF;
+ } else {
+ rc = -ENOTSUPP;
+ }
+ break;
+ case 11:
+ chip = "at86rf233";
+ lp->dev->phy->channels_supported[0] = 0x7FFF800;
+ break;
+ default:
+ chip = "unkown";
+ rc = -ENOTSUPP;
+ break;
+ }
+
+ dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version);
+
+ return rc;
+}
+
static int at86rf230_probe(struct spi_device *spi)
{
struct at86rf230_platform_data *pdata;
struct ieee802154_dev *dev;
struct at86rf230_local *lp;
- u16 man_id = 0;
- u8 part = 0, version = 0;
unsigned int status;
irq_handler_t irq_handler;
work_func_t irq_worker;
int rc, irq_type;
- const char *chip;
if (!spi->irq) {
dev_err(&spi->dev, "no IRQ specified\n");
@@ -1133,54 +1151,8 @@ static int at86rf230_probe(struct spi_device *spi)
lp = dev->priv;
lp->dev = dev;
- lp->part = part;
- lp->vers = version;
-
lp->spi = spi;
-
dev->parent = &spi->dev;
- dev->extra_tx_headroom = 0;
- dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
- IEEE802154_HW_TXPOWER | IEEE802154_HW_CSMA;
-
- rc = __at86rf230_detect_device(spi, &man_id, &part, &version);
- if (rc < 0)
- goto free_dev;
-
- if (man_id != 0x001f) {
- dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
- man_id >> 8, man_id & 0xFF);
- return -EINVAL;
- }
-
- switch (part) {
- case 2:
- chip = "at86rf230";
- rc = -ENOTSUPP;
- /* FIXME: should be easy to support; */
- break;
- case 3:
- chip = "at86rf231";
- break;
- case 7:
- chip = "at86rf212";
- if (version == 1)
- dev->flags |= IEEE802154_HW_LBT;
- else
- rc = -ENOTSUPP;
- break;
- case 11:
- chip = "at86rf233";
- break;
- default:
- chip = "UNKNOWN";
- rc = -ENOTSUPP;
- break;
- }
-
- dev_info(&spi->dev, "Detected %s chip version %d\n", chip, version);
- if (rc < 0)
- goto free_dev;
lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
if (IS_ERR(lp->regmap)) {
@@ -1190,6 +1162,10 @@ static int at86rf230_probe(struct spi_device *spi)
goto free_dev;
}
+ rc = at86rf230_detect_device(lp);
+ if (rc < 0)
+ goto free_dev;
+
irq_type = irq_get_trigger_type(spi->irq);
if (!irq_type)
irq_type = IRQF_TRIGGER_RISING;
@@ -1208,13 +1184,6 @@ static int at86rf230_probe(struct spi_device *spi)
spi_set_drvdata(spi, lp);
- if (is_rf212(lp)) {
- dev->phy->channels_supported[0] = 0x00007FF;
- dev->phy->channels_supported[2] = 0x00007FF;
- } else {
- dev->phy->channels_supported[0] = 0x7FFF800;
- }
-
rc = at86rf230_hw_init(lp);
if (rc)
goto err_hw_init;
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists