| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1404355233-30123-12-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Wed, 2 Jul 2014 19:40:30 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Catherine Sullivan <catherine.sullivan@...el.com>,
netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 11/14] i40e/i40evf: Add set_fc and init of FC settings
From: Catherine Sullivan <catherine.sullivan@...el.com>
Add function set_fc to set the requested FC mode. This patch also
adds the init of FC setting to get_link_info and replaces the init
code to set FC off by default in main. Also adds i40e_set_phy_config
to support this.
Change-ID: I7b25bbaec81f15777137ab324a095f916e44351d
Signed-off-by: Catherine Sullivan <catherine.sullivan@...el.com>
Tested-by: Jim Young <jamesx.m.young@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_common.c | 125 +++++++++++++++++++++++
drivers/net/ethernet/intel/i40e/i40e_main.c | 60 +----------
drivers/net/ethernet/intel/i40e/i40e_prototype.h | 9 ++
drivers/net/ethernet/intel/i40e/i40e_type.h | 8 ++
drivers/net/ethernet/intel/i40evf/i40e_type.h | 8 ++
5 files changed, 154 insertions(+), 56 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index debca01..bf808d4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1083,6 +1083,118 @@ i40e_status i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
}
/**
+ * i40e_aq_set_phy_config
+ * @hw: pointer to the hw struct
+ * @config: structure with PHY configuration to be set
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Set the various PHY configuration parameters
+ * supported on the Port.One or more of the Set PHY config parameters may be
+ * ignored in an MFP mode as the PF may not have the privilege to set some
+ * of the PHY Config parameters. This status will be indicated by the
+ * command response.
+ **/
+enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
+ struct i40e_aq_set_phy_config *config,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aq_set_phy_config *cmd =
+ (struct i40e_aq_set_phy_config *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ if (!config)
+ return I40E_ERR_PARAM;
+
+ i40e_fill_default_direct_cmd_desc(&desc,
+ i40e_aqc_opc_set_phy_config);
+
+ *cmd = *config;
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ return status;
+}
+
+/**
+ * i40e_set_fc
+ * @hw: pointer to the hw struct
+ *
+ * Set the requested flow control mode using set_phy_config.
+ **/
+enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
+ bool atomic_restart)
+{
+ enum i40e_fc_mode fc_mode = hw->fc.requested_mode;
+ struct i40e_aq_get_phy_abilities_resp abilities;
+ struct i40e_aq_set_phy_config config;
+ enum i40e_status_code status;
+ u8 pause_mask = 0x0;
+
+ *aq_failures = 0x0;
+
+ switch (fc_mode) {
+ case I40E_FC_FULL:
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX;
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_RX;
+ break;
+ case I40E_FC_RX_PAUSE:
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_RX;
+ break;
+ case I40E_FC_TX_PAUSE:
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX;
+ break;
+ default:
+ break;
+ }
+
+ /* Get the current phy config */
+ status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
+ NULL);
+ if (status) {
+ *aq_failures |= I40E_SET_FC_AQ_FAIL_GET;
+ return status;
+ }
+
+ memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
+ /* clear the old pause settings */
+ config.abilities = abilities.abilities & ~(I40E_AQ_PHY_FLAG_PAUSE_TX) &
+ ~(I40E_AQ_PHY_FLAG_PAUSE_RX);
+ /* set the new abilities */
+ config.abilities |= pause_mask;
+ /* If the abilities have changed, then set the new config */
+ if (config.abilities != abilities.abilities) {
+ /* Auto restart link so settings take effect */
+ if (atomic_restart)
+ config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
+ /* Copy over all the old settings */
+ config.phy_type = abilities.phy_type;
+ config.link_speed = abilities.link_speed;
+ config.eee_capability = abilities.eee_capability;
+ config.eeer = abilities.eeer_val;
+ config.low_power_ctrl = abilities.d3_lpan;
+ status = i40e_aq_set_phy_config(hw, &config, NULL);
+
+ if (status)
+ *aq_failures |= I40E_SET_FC_AQ_FAIL_SET;
+ }
+ /* Update the link info */
+ status = i40e_update_link_info(hw, true);
+ if (status) {
+ /* Wait a little bit (on 40G cards it sometimes takes a really
+ * long time for link to come back from the atomic reset)
+ * and try once more
+ */
+ msleep(1000);
+ status = i40e_update_link_info(hw, true);
+ }
+ if (status)
+ *aq_failures |= I40E_SET_FC_AQ_FAIL_UPDATE;
+
+ return status;
+}
+
+/**
* i40e_aq_clear_pxe_mode
* @hw: pointer to the hw struct
* @cmd_details: pointer to command details structure or NULL
@@ -1158,6 +1270,7 @@ i40e_status i40e_aq_get_link_info(struct i40e_hw *hw,
(struct i40e_aqc_get_link_status *)&desc.params.raw;
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
i40e_status status;
+ bool tx_pause, rx_pause;
u16 command_flags;
i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_link_status);
@@ -1187,6 +1300,18 @@ i40e_status i40e_aq_get_link_info(struct i40e_hw *hw,
hw_link_info->max_frame_size = le16_to_cpu(resp->max_frame_size);
hw_link_info->pacing = resp->config & I40E_AQ_CONFIG_PACING_MASK;
+ /* update fc info */
+ tx_pause = !!(resp->an_info & I40E_AQ_LINK_PAUSE_TX);
+ rx_pause = !!(resp->an_info & I40E_AQ_LINK_PAUSE_RX);
+ if (tx_pause & rx_pause)
+ hw->fc.current_mode = I40E_FC_FULL;
+ else if (tx_pause)
+ hw->fc.current_mode = I40E_FC_TX_PAUSE;
+ else if (rx_pause)
+ hw->fc.current_mode = I40E_FC_RX_PAUSE;
+ else
+ hw->fc.current_mode = I40E_FC_NONE;
+
if (resp->config & I40E_AQ_CONFIG_CRC_ENA)
hw_link_info->crc_enable = true;
else
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 71eff16..44cea6a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4326,8 +4326,12 @@ static void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
static int i40e_up_complete(struct i40e_vsi *vsi)
{
struct i40e_pf *pf = vsi->back;
+ u8 set_fc_aq_fail = 0;
int err;
+ /* force flow control off */
+ i40e_set_fc(&pf->hw, &set_fc_aq_fail, true);
+
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
i40e_vsi_configure_msix(vsi);
else
@@ -8277,7 +8281,6 @@ int i40e_fetch_switch_configuration(struct i40e_pf *pf, bool printconfig)
**/
static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
{
- u32 rxfc = 0, txfc = 0, rxfc_reg;
int ret;
/* find out what's out there already */
@@ -8343,62 +8346,7 @@ static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
/* Initialize user-specific link properties */
pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
I40E_AQ_AN_COMPLETED) ? true : false);
- /* requested_mode is set in probe or by ethtool */
- if (!pf->fc_autoneg_status)
- goto no_autoneg;
-
- if ((pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX) &&
- (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX))
- pf->hw.fc.current_mode = I40E_FC_FULL;
- else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX)
- pf->hw.fc.current_mode = I40E_FC_TX_PAUSE;
- else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX)
- pf->hw.fc.current_mode = I40E_FC_RX_PAUSE;
- else
- pf->hw.fc.current_mode = I40E_FC_NONE;
-
- /* sync the flow control settings with the auto-neg values */
- switch (pf->hw.fc.current_mode) {
- case I40E_FC_FULL:
- txfc = 1;
- rxfc = 1;
- break;
- case I40E_FC_TX_PAUSE:
- txfc = 1;
- rxfc = 0;
- break;
- case I40E_FC_RX_PAUSE:
- txfc = 0;
- rxfc = 1;
- break;
- case I40E_FC_NONE:
- case I40E_FC_DEFAULT:
- txfc = 0;
- rxfc = 0;
- break;
- case I40E_FC_PFC:
- /* TBD */
- break;
- /* no default case, we have to handle all possibilities here */
- }
-
- wr32(&pf->hw, I40E_PRTDCB_FCCFG, txfc << I40E_PRTDCB_FCCFG_TFCE_SHIFT);
-
- rxfc_reg = rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
- ~I40E_PRTDCB_MFLCN_RFCE_MASK;
- rxfc_reg |= (rxfc << I40E_PRTDCB_MFLCN_RFCE_SHIFT);
-
- wr32(&pf->hw, I40E_PRTDCB_MFLCN, rxfc_reg);
-
- goto fc_complete;
-
-no_autoneg:
- /* disable L2 flow control, user can turn it on if they wish */
- wr32(&pf->hw, I40E_PRTDCB_FCCFG, 0);
- wr32(&pf->hw, I40E_PRTDCB_MFLCN, rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
- ~I40E_PRTDCB_MFLCN_RFCE_MASK);
-fc_complete:
i40e_ptp_init(pf);
return ret;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 6790878..b6849fb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -74,6 +74,15 @@ i40e_status i40e_aq_set_phy_debug(struct i40e_hw *hw, u8 cmd_flags,
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_default_vsi(struct i40e_hw *hw, u16 vsi_id,
struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
+ bool qualified_modules, bool report_init,
+ struct i40e_aq_get_phy_abilities_resp *abilities,
+ struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
+ struct i40e_aq_set_phy_config *config,
+ struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
+ bool atomic_reset);
i40e_status i40e_aq_clear_pxe_mode(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_link_restart_an(struct i40e_hw *hw,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index f1c58ab..380eb53 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -140,6 +140,14 @@ enum i40e_fc_mode {
I40E_FC_DEFAULT
};
+enum i40e_set_fc_aq_failures {
+ I40E_SET_FC_AQ_FAIL_NONE = 0,
+ I40E_SET_FC_AQ_FAIL_GET = 1,
+ I40E_SET_FC_AQ_FAIL_SET = 2,
+ I40E_SET_FC_AQ_FAIL_UPDATE = 4,
+ I40E_SET_FC_AQ_FAIL_SET_UPDATE = 6
+};
+
enum i40e_vsi_type {
I40E_VSI_MAIN = 0,
I40E_VSI_VMDQ1,
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index 5b6e955..6dd72ad 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -140,6 +140,14 @@ enum i40e_fc_mode {
I40E_FC_DEFAULT
};
+enum i40e_set_fc_aq_failures {
+ I40E_SET_FC_AQ_FAIL_NONE = 0,
+ I40E_SET_FC_AQ_FAIL_GET = 1,
+ I40E_SET_FC_AQ_FAIL_SET = 2,
+ I40E_SET_FC_AQ_FAIL_UPDATE = 4,
+ I40E_SET_FC_AQ_FAIL_SET_UPDATE = 6
+};
+
enum i40e_vsi_type {
I40E_VSI_MAIN = 0,
I40E_VSI_VMDQ1,
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists