early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.12.0-rc3-00804-gefe4208 (kbuild@jaketown) (gcc version 4.8.2 (Debian 4.8.2-18) ) #18 Sun Jul 6 02:35:01 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [c00f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12000000-0x123fffff] [ 0.000000] [mem 0x12000000-0x123fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x11ffffff] [ 0.000000] [mem 0x10000000-0x11ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12400000-0x13ffdfff] [ 0.000000] [mem 0x12400000-0x13bfffff] page 2M [ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x01e77000, 0x01e77fff] PGTABLE [ 0.000000] cma: CMA: reserved 32 MiB at 10400000 [ 0.000000] RAMDISK: [mem 0x127ab000-0x13feffff] [ 0.000000] ACPI: RSDP 000f0d00 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 13fffc2a 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 13fff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 13ffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 13ffe000 00040 [ 0.000000] ACPI: SSDT 13fff234 0093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 13fffb72 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 13fffbf2 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, boot clock [ 0.000000] BRK [0x01e78000, 0x01e78fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] free_area_init_node: node 0, pgdat c1d4f2a0, node_mem_map d252b020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1cb93c0 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-x0-07021302/next:master:efe4208f47f907b86f528788da711e8ab9dea44d:bisect-linux6/.vmlinuz-efe4208f47f907b86f528788da711e8ab9dea44d-20140706023516-161-ivb42 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x0-07021302/efe4208f47f907b86f528788da711e8ab9dea44d/vmlinuz-3.12.0-rc3-00804-gefe4208 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 251748K/327280K available (9918K kernel code, 727K rwdata, 3008K rodata, 564K init, 548K bss, 75532K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe1000 - 0xfffff000 ( 120 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xff7fe000 ( 688 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xc1d57000 - 0xc1de4000 ( 564 kB) [ 0.000000] .data : 0xc19afbaf - 0xc1d56e40 (3740 kB) [ 0.000000] .text : 0xc1000000 - 0xc19afbaf (9918 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=d0008000 soft=d000a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.12.0-rc3-00804-gefe4208 (kbuild@jaketown) (gcc version 4.8.2 (Debian 4.8.2-18) ) #18 Sun Jul 6 02:35:01 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [c00f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12000000-0x123fffff] [ 0.000000] [mem 0x12000000-0x123fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x11ffffff] [ 0.000000] [mem 0x10000000-0x11ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12400000-0x13ffdfff] [ 0.000000] [mem 0x12400000-0x13bfffff] page 2M [ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x01e77000, 0x01e77fff] PGTABLE [ 0.000000] cma: CMA: reserved 32 MiB at 10400000 [ 0.000000] RAMDISK: [mem 0x127ab000-0x13feffff] [ 0.000000] ACPI: RSDP 000f0d00 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 13fffc2a 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 13fff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 13ffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 13ffe000 00040 [ 0.000000] ACPI: SSDT 13fff234 0093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 13fffb72 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 13fffbf2 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, boot clock [ 0.000000] BRK [0x01e78000, 0x01e78fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] free_area_init_node: node 0, pgdat c1d4f2a0, node_mem_map d252b020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1cb93c0 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-x0-07021302/next:master:efe4208f47f907b86f528788da711e8ab9dea44d:bisect-linux6/.vmlinuz-efe4208f47f907b86f528788da711e8ab9dea44d-20140706023516-161-ivb42 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x0-07021302/efe4208f47f907b86f528788da711e8ab9dea44d/vmlinuz-3.12.0-rc3-00804-gefe4208 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 251748K/327280K available (9918K kernel code, 727K rwdata, 3008K rodata, 564K init, 548K bss, 75532K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe1000 - 0xfffff000 ( 120 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xff7fe000 ( 688 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xc1d57000 - 0xc1de4000 ( 564 kB) [ 0.000000] .data : 0xc19afbaf - 0xc1d56e40 (3740 kB) [ 0.000000] .text : 0xc1000000 - 0xc19afbaf (9918 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=d0008000 soft=d000a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.508 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508) [ 0.004004] pid_max: default: 32768 minimum: 301 [ 0.005089] Mount-cache hash table entries: 512 [ 0.006283] Initializing cgroup subsys net_cls [ 0.007006] Initializing cgroup subsys perf_event [ 0.008084] mce: CPU supports 10 MCE banks [ 0.009052] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.009052] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.009052] tlb_flushall_shift: 6 [ 0.010004] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.022591] ACPI: Core revision 20130725 [ 0.029633] ACPI: All ACPI Tables successfully acquired [ 0.031009] ACPI: setting ELCR to 0200 (from 0c00) [ 0.032108] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.034122] Getting VERSION: 1050014 [ 0.035008] Getting VERSION: 1050014 [ 0.036005] Getting ID: 0 [ 0.037013] Getting ID: f000000 [ 0.038009] Getting LVT0: 8700 [ 0.039005] Getting LVT1: 8400 [ 0.040025] enabled ExtINT on CPU#0 [ 0.041014] Using local APIC timer interrupts. [ 0.041014] calibrating APIC timer ... [ 0.043000] ... lapic delta = 6438130 [ 0.043000] ... PM-Timer delta = 368720 [ 0.043000] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms [ 0.043000] APIC delta adjusted to PM-Timer: 6250147 (6438130) [ 0.043000] TSC delta adjusted to PM-Timer: 269348185 (277449234) [ 0.043000] ..... delta 6250147 [ 0.043000] ..... mult: 268441769 [ 0.043000] ..... calibration result: 1000023 [ 0.043000] ..... CPU clock speed is 2693.0481 MHz. [ 0.043000] ..... host bus clock speed is 1000.0023 MHz. [ 0.043212] devtmpfs: initialized [ 0.045436] regulator-dummy: no parameters [ 0.046192] NET: Registered protocol family 16 [ 0.048299] cpuidle: using governor ladder [ 0.049002] cpuidle: using governor menu [ 0.050494] ACPI: bus type PCI registered [ 0.051232] PCI: PCI BIOS revision 2.10 entry at 0xfd456, last bus=0 [ 0.052002] PCI: Using configuration type 1 for base access [ 0.059893] bio: create slab at 0 [ 0.061174] ACPI: Added _OSI(Module Device) [ 0.062002] ACPI: Added _OSI(Processor Device) [ 0.063002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064002] ACPI: Added _OSI(Processor Aggregator Device) [ 0.065514] ACPI: EC: Look up EC in DSDT [ 0.074615] ACPI: Interpreter enabled [ 0.075013] ACPI: (supports S0 S5) [ 0.076002] ACPI: Using PIC for interrupt routing [ 0.077043] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.091267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.092012] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.093468] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.094057] PCI host bridge to bus 0000:00 [ 0.095004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.096004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.097004] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] [ 0.098004] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] [ 0.099006] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] [ 0.100004] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] [ 0.101004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.102004] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff] [ 0.103039] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.104501] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.105606] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.109492] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.112128] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.113332] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.114011] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.116119] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.118612] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.121003] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.128004] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.130252] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.132003] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.134492] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.140489] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.142241] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.143510] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.147466] pci_bus 0000:00: on NUMA node 0 [ 0.149719] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.151306] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.153299] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.155345] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.157048] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.159368] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.160007] ACPI: \_SB_.PCI0: notify handler is installed [ 0.161021] Found 1 acpi root devices [ 0.163139] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.164002] vgaarb: loaded [ 0.165001] vgaarb: bridge control possible 0000:00:02.0 [ 0.167315] SCSI subsystem initialized [ 0.168036] libata version 3.00 loaded. [ 0.169144] media: Linux media interface: v0.10 [ 0.170023] Linux video capture interface: v2.00 [ 0.171025] pps_core: LinuxPPS API ver. 1 registered [ 0.172001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.173014] PTP clock support registered [ 0.174177] PCI: Using ACPI for IRQ routing [ 0.175002] PCI: pci_cache_line_size set to 64 bytes [ 0.176103] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.177005] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.178171] Bluetooth: Core ver 2.16 [ 0.179014] NET: Registered protocol family 31 [ 0.180001] Bluetooth: HCI device and connection manager initialized [ 0.181006] Bluetooth: HCI socket layer initialized [ 0.182005] Bluetooth: L2CAP socket layer initialized [ 0.183005] Bluetooth: SCO socket layer initialized [ 0.185025] nfc: nfc_init: NFC Core ver 0.1 [ 0.186029] NET: Registered protocol family 39 [ 0.187514] Switched to clocksource kvm-clock [ 0.188086] pnp: PnP ACPI init [ 0.188901] ACPI: bus type PNP registered [ 0.189940] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.191339] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.192732] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.194144] pnp 00:03: [dma 2] [ 0.194988] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.196436] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.197871] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.199702] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.201443] pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.202752] pnp: PnP ACPI: found 8 devices [ 0.203750] ACPI: bus type PNP unregistered [ 0.533006] mdacon: MDA with 8K of memory detected. [ 0.533065] Console: switching consoles 13-16 to MDA-2 [ 0.570084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.571269] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 0.572433] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 0.573628] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 0.574798] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 0.575961] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 0.577229] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 0.578564] NET: Registered protocol family 2 [ 0.579757] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.581174] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.582468] TCP: Hash tables configured (established 4096 bind 4096) [ 0.583758] TCP: reno registered [ 0.584604] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.585805] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.587146] NET: Registered protocol family 1 [ 0.588161] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.589390] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.590595] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.591861] pci 0000:00:02.0: Boot video device [ 0.592904] PCI: CLS 0 bytes, default 64 [ 0.593943] Trying to unpack rootfs image as initramfs... [ 0.666152] cfg80211: Calling CRDA to update world regulatory domain [ 1.254651] Freeing initrd memory: 24852K (d27ab000 - d3ff0000) [ 1.256128] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 1.256940] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.258695] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 1.260039] NatSemi SCx200 Driver [ 1.260793] audit: initializing netlink socket (disabled) [ 1.261580] type=2000 audit(1404585359.400:1): initialized [ 1.265482] VFS: Disk quotas dquot_6.5.2 [ 1.266169] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.267664] fuse init (API version 7.22) [ 1.268508] JFS: nTxBlock = 2416, nTxLock = 19335 [ 1.269582] NILFS version 2 loaded [ 1.270170] OCFS2 1.5.0 [ 1.270800] OCFS2 DLMFS 1.5.0 [ 1.271394] OCFS2 User DLM kernel interface loaded [ 1.272112] OCFS2 Node Manager 1.5.0 [ 1.273037] GFS2 installed [ 1.275555] alg: No test for crc32 (crc32-table) [ 1.276354] alg: No test for lz4 (lz4-generic) [ 1.277055] alg: No test for lz4hc (lz4hc-generic) [ 1.277784] alg: No test for stdrng (krng) [ 1.278478] NET: Registered protocol family 38 [ 1.279167] Key type asymmetric registered [ 1.279798] Asymmetric key parser 'x509' registered [ 1.280569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.283348] io scheduler noop registered (default) [ 1.284125] io scheduler cfq registered [ 1.284735] test_string_helpers: Running tests... [ 1.285783] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 1.286527] crc32: self tests passed, processed 225944 bytes in 148697 nsec [ 1.287595] crc32c: CRC_LE_BITS = 64 [ 1.288191] crc32c: self tests passed, processed 225944 bytes in 75040 nsec [ 1.289176] Console: switching consoles 13-16 to MDA-2 [ 1.290085] hgafb: HGA card not detected. [ 1.290707] hgafb: probe of hgafb.0 failed with error -22 [ 1.291578] uvesafb: failed to execute /sbin/v86d [ 1.292301] uvesafb: make sure that the v86d helper is installed and executable [ 1.293440] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 1.294324] uvesafb: vbe_init() failed with -22 [ 1.294993] uvesafb: probe of uvesafb.0 failed with error -22 [ 1.295875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.297054] ACPI: Power Button [PWRF] [ 1.308695] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 1.309482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.336025] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.338995] Cyclades driver 2.6 [ 1.359724] MOXA Smartio/Industio family driver version 2.0.5 [ 1.360587] lp: driver loaded but no devices found [ 1.361335] DoubleTalk PC - not found [ 1.362027] ppdev: user-space parallel port driver [ 1.362768] scx200_gpio: no SCx200 gpio present [ 1.363507] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 1.364448] platform pc8736x_gpio.0: no device found [ 1.365200] nsc_gpio initializing [ 1.365773] smapi::smapi_init, ERROR invalid usSmapiID [ 1.366516] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 1.367828] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 1.368956] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 1.369822] SyncLink PC Card driver $Revision: 4.34 $, tty major#248 [ 1.370730] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.372023] Hangcheck: Using getrawmonotonic(). [ 1.372755] [drm] Initialized drm 1.1.0 20060810 [ 1.373932] parport_pc 00:04: reported by Plug and Play ACPI [ 1.374811] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 1.457195] lp0: using parport0 (interrupt-driven). [ 1.457938] lp0: console ready [ 1.460430] brd: module loaded [ 1.461730] loop: module loaded [ 1.462552] nbd: registered device at major 43 [ 1.465016] rbd: loaded rbd (rados block device) [ 1.465779] dummy-irq: no IRQ given. Use irq=N [ 1.466603] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 1.467931] c2port c2port0: C2 port uc added [ 1.468638] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 1.470419] Uniform Multi-Platform E-IDE driver [ 1.471247] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.472770] ide-gd driver 1.18 [ 1.473450] ide-cd driver 5.00 [ 1.474103] Loading iSCSI transport class v2.0-870. [ 1.475051] hp_sw: device handler registered [ 1.475872] emc: device handler registered [ 1.476739] iscsi: registered transport (tcp) [ 1.477850] scsi: Detection failed (no card) [ 1.478810] NCR53c406a: no available ports found [ 1.479618] sym53c416.c: Version 1.0.0-ac [ 1.480385] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! [ 1.590841] ppa: Version 2.07 (for Linux 2.4.x) [ 1.593756] imm: Version 2.05 (for Linux 2.4.0) [ 1.594962] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.594962] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.597100] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 1.598704] SSFDC read-only Flash Translation layer [ 1.599461] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 1.600654] platform physmap-flash.0: failed to claim resource 0 [ 1.601515] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 1.602387] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver [ 1.603194] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 1.604058] slram: not enough parameters. [ 1.605399] ftl_cs: FTL header not found. [ 1.642789] No valid DiskOnChip devices found [ 1.644431] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 1.647309] LocalTalk card not found; 220 = ff, 240 = ff. [ 1.649320] arcnet loaded. [ 1.650161] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 1.651620] arcnet: raw mode (`r') encapsulation support loaded. [ 1.652988] arcnet: COM90xx chipset support [ 1.960608] S3: No ARCnet cards found. [ 1.962087] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 1.963940] E-mail me if you actually test this driver, please! [ 1.965262] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 2.005463] PPP generic driver version 2.4.2 [ 2.006646] PPP BSD Compression module registered [ 2.007788] PPP MPPE Compression module registered [ 2.008933] NET: Registered protocol family 24 [ 2.010033] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 2.011534] CSLIP: code copyright 1989 Regents of the University of California. [ 2.013384] SLIP linefill/keepalive option. [ 2.014479] airo(): Probing for PCI adapters [ 2.015583] airo(): Finished probing for PCI adapters [ 2.016808] Broadcom 43xx-legacy driver loaded [ Features: PLD ] [ 2.018188] libertas_sdio: Libertas SDIO driver [ 2.019304] libertas_sdio: Copyright Pierre Ossman [ 2.020607] Intel ISA PCIC probe: not found. [ 2.021874] Databook TCIC-2 PCMCIA probe: not found. [ 2.023506] aoe: cannot create debugfs directory [ 2.024669] aoe: AoE v85 initialised. [ 2.025720] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.028334] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.029510] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.091936] mousedev: PS/2 mouse device common for all mice [ 2.093726] mk712: device not present [ 2.095398] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.097531] wistron_btns: System unknown [ 2.099572] i2c-parport-light: adapter type unspecified [ 2.100899] isa i2c-pca-isa.0: Please specify I/O base [ 2.102144] scx200_i2c: no SCx200 gpio pins available [ 2.103798] m2m-testdev m2m-testdev.0: Device registered as /dev/video0 [ 2.105298] radio-rtrack2.0: you must set an I/O address with io=0x20f/0x30f. [ 2.106985] radio-rtrack2: probe of radio-rtrack2.0 failed with error -22 [ 2.256092] tsc: Refined TSC clocksource calibration: 2693.522 MHz [ 5.341646] radio-typhoon.0: Initialized radio card Typhoon Radio on port 0x316 [ 8.343675] radio-aimslab.0: Initialized radio card AIMSlab RadioTrack/RadioReveal on port 0x30f [ 8.376236] radio-zoltrix.0: Initialized radio card Zoltrix Radio Plus on port 0x20c [ 8.377596] pps pps0: new PPS source ktimer [ 8.378250] pps pps0: ktimer PPS source registered [ 8.378939] pps_ldisc: PPS line discipline registered [ 8.379661] pps_parport: parallel port PPS client [ 8.380363] parport0: cannot grant exclusive access for device pps_parport [ 8.381297] pps_parport: couldn't register with parport0 [ 8.395096] Driver for 1-wire Dallas network protocol. [ 8.395901] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 8.397031] w83781d: Detection failed at step 2 [ 8.398409] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 8.399545] md: raid0 personality registered for level 0 [ 8.400296] md: raid1 personality registered for level 1 [ 8.401036] md: raid10 personality registered for level 10 [ 8.401794] md: multipath personality registered for level -4 [ 8.402583] Bluetooth: Virtual HCI driver ver 1.4 [ 8.403313] Bluetooth: HCI UART driver ver 2.2 [ 8.404043] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 8.404841] wbsd: Copyright(c) Pierre Ossman [ 8.405766] ledtrig-cpu: registered to indicate activity on CPUs [ 8.407211] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 8.421438] NET: Registered protocol family 26 [ 8.422245] u32 classifier [ 8.422745] input device check on [ 8.423411] ipip: IPv4 over IPv4 tunneling driver [ 8.424216] TCP: cubic registered [ 8.424773] Initializing XFRM netlink socket [ 8.425661] NET: Registered protocol family 10 [ 8.426630] mip6: Mobile IPv6 [ 8.427170] sit: IPv6 over IPv4 tunneling driver [ 8.428103] ip6_gre: GRE over IPv6 tunneling driver [ 8.428930] NET: Registered protocol family 15 [ 8.429663] NET: Registered protocol family 5 [ 8.430364] NET: Registered protocol family 9 [ 8.431021] X.25 for Linux Version 0.2 [ 8.431652] Bluetooth: RFCOMM socket layer initialized [ 8.432397] Bluetooth: RFCOMM ver 1.11 [ 8.432988] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.433734] Bluetooth: BNEP filters: multicast [ 8.434408] Bluetooth: BNEP socket layer initialized [ 8.436743] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 8.437553] Bluetooth: HIDP socket layer initialized [ 8.438349] NET: Registered protocol family 33 [ 8.439018] Key type rxrpc registered [ 8.439610] Key type rxrpc_s registered [ 8.440233] l2tp_core: L2TP core driver, V2.0 [ 8.440889] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 8.441592] lib80211: common routines for IEEE802.11 drivers [ 8.442378] lib80211_crypt: registered algorithm 'NULL' [ 8.456136] lib80211_crypt: registered algorithm 'WEP' [ 8.456864] lib80211_crypt: registered algorithm 'CCMP' [ 8.457609] lib80211_crypt: registered algorithm 'TKIP' [ 8.458359] tipc: Activated (version 2.0.0) [ 8.459144] NET: Registered protocol family 30 [ 8.459932] tipc: Started in single node mode [ 8.460608] 9pnet: Installing 9P2000 support [ 8.461299] NET: Registered protocol family 37 [ 8.461968] Key type ceph registered [ 8.462666] libceph: loaded (mon/osd proto 15/24) [ 8.463412] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded [ 8.464630] mpls_gso: MPLS GSO support [ 8.465667] Using IPI Shortcut mode [ 8.466335] registered taskstats version 1 [ 8.467106] Key type trusted registered [ 8.467868] Key type encrypted registered [ 8.468798] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 8.483057] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 8.483873] EDD information not available. [ 8.484755] Freeing unused kernel memory: 564K (c1d57000 - c1de4000) [ 8.485644] Write protecting the kernel text: 9920k [ 8.486380] Write protecting the kernel read-only data: 3012k [ 8.560469] init: Failed to create pty - disabling logging for job [ 8.561379] init: Temporary process spawn error: No such file or directory [ 8.566894] init: Failed to create pty - disabling logging for job [ 8.567789] init: Temporary process spawn error: No such file or directory [ 8.590649] init: Failed to create pty - disabling logging for job [ 8.591553] init: Temporary process spawn error: No such file or directory [ 8.593740] init: Failed to create pty - disabling logging for job [ 8.594625] init: Temporary process spawn error: No such file or directory [ 8.622613] init: Failed to create pty - disabling logging for job [ 8.623555] init: Temporary process spawn error: No such file or directory [ 8.638236] init: Failed to create pty - disabling logging for job [ 8.639123] init: Temporary process spawn error: No such file or directory [ 8.644139] init: Failed to create pty - disabling logging for job [ 8.645019] init: Temporary process spawn error: No such file or directory [ 8.650521] udevd[191]: starting version 175 [ 8.665166] init: Failed to create pty - disabling logging for job [ 8.666044] init: Temporary process spawn error: No such file or directory [ 8.670498] init: Failed to create pty - disabling logging for job [ 8.671392] init: Temporary process spawn error: No such file or directory [ 8.674241] init: Failed to create pty - disabling logging for job [ 8.675132] init: Temporary process spawn error: No such file or directory [ 8.699255] init: Failed to create pty - disabling logging for job [ 8.701102] init: Failed to create pty - disabling logging for job [ 8.850837] init: Failed to create pty - disabling logging for job [ 8.852977] init: Failed to create pty - disabling logging for job [ 8.855701] init: Failed to create pty - disabling logging for job [ 8.872634] init: Failed to create pty - disabling logging for job [ 8.976187] init: Failed to create pty - disabling logging for job [ 8.981151] init: Failed to create pty - disabling logging for job [ 8.983247] init: Failed to create pty - disabling logging for job Kernel tests: Boot OK! [ 8.987192] init: Failed to create pty - disabling logging for job [ 8.991691] init: Failed to create pty - disabling logging for job [ 19.686410] ============================================================================= [ 19.687007] BUG kmalloc-512 (Not tainted): Object padding overwritten [ 19.687007] ----------------------------------------------------------------------------- [ 19.687007] [ 19.687007] INFO: 0xd34113a8-0xd34113ab. First byte 0x1 instead of 0x5a [ 19.687007] INFO: Allocated in sk_prot_alloc.isra.39+0x53/0xd0 age=606 cpu=0 pid=293 [ 19.687007] INFO: Slab 0xd2793200 objects=14 used=3 fp=0xd3410af0 flags=0x40004080 [ 19.687007] INFO: Object 0xd3411180 @offset=4480 fp=0xd3410f50 [ 19.687007] [ 19.687007] Bytes b4 d3411170: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ [ 19.687007] Object d3411180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411190: 18 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d34111a0: 60 c2 d4 c1 e0 20 d4 c1 00 00 00 00 00 00 00 00 `.... .......... [ 19.687007] Object d34111b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d34111c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d34111d0: ff ff ff ff 00 00 00 00 00 00 00 00 dc 11 41 d3 ..............A. [ 19.687007] Object d34111e0: dc 11 41 d3 e4 11 41 d3 e4 11 41 d3 00 00 00 00 ..A...A...A..... [ 19.687007] Object d34111f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411210: 00 80 02 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411220: 00 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411230: 00 00 00 00 00 00 00 00 00 80 02 00 3c 12 41 d3 ............<.A. [ 19.687007] Object d3411240: 3c 12 41 d3 00 00 00 00 00 01 01 00 00 00 00 00 <.A............. [ 19.687007] Object d3411250: d0 00 00 00 ff ff ff ff ff ff ff ff 00 00 00 00 ................ [ 19.687007] Object d3411260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411270: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411280: 80 12 41 d3 80 12 41 d3 00 00 00 00 60 c2 d4 c1 ..A...A.....`... [ 19.687007] Object d3411290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d34112a0: 00 00 00 00 00 00 00 00 ff ff ff 7f ff ff ff 7f ................ [ 19.687007] Object d34112b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d34112c0: 80 1e df c1 00 00 00 00 00 00 00 00 ff ff ff ff ................ [ 19.687007] Object d34112d0: 00 36 65 c4 ff ff ff ff 00 00 00 00 00 00 00 00 .6e............. [ 19.687007] Object d34112e0: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ................ [ 19.687007] Object d34112f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411300: 90 99 7a c1 60 9a 7a c1 d0 99 7a c1 20 99 7a c1 ..z.`.z...z. .z. [ 19.687007] Object d3411310: b0 3c 8f c1 50 47 8f c1 00 00 00 00 00 00 00 00 .<..PG.......... [ 19.687007] Object d3411320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411350: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Object d3411370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 19.687007] Redzone d3411380: cc cc cc cc .... [ 19.687007] Padding d34113a8: 01 00 00 00 5a 5a 5a 5a ....ZZZZ [ 19.687007] FIX kmalloc-512: Restoring 0xd34113a8-0xd34113ab=0x5a [ 19.687007] Elapsed time: 25 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-x0-07021302/efe4208f47f907b86f528788da711e8ab9dea44d/vmlinuz-3.12.0-rc3-00804-gefe4208 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-x0-07021302/next:master:efe4208f47f907b86f528788da711e8ab9dea44d:bisect-linux6/.vmlinuz-efe4208f47f907b86f528788da711e8ab9dea44d-20140706023516-161-ivb42 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x0-07021302/efe4208f47f907b86f528788da711e8ab9dea44d/vmlinuz-3.12.0-rc3-00804-gefe4208 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb42-23 -serial file:/dev/shm/kboot/serial-quantal-ivb42-23 -daemonize -display none -monitor null