netdev - [PATCH net-next 1/6] net/mlx4_en: Fix set port ratelimit for 40GE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1404807924-29038-2-git-send-email-amirv@mellanox.com>
Date:	Tue,  8 Jul 2014 11:25:19 +0300
From:	Amir Vadai <amirv@...lanox.com>
To:	"David S. Miller" <davem@...emloft.net>
Cc:	netdev@...r.kernel.org, Or Gerlitz <ogerlitz@...lanox.com>,
	Yevgeny Petrilin <yevgenyp@...lanox.com>,
	Amir Vadai <amirv@...lanox.com>,
	Eugenia Emantayev <eugenia@...lanox.com>,
	Sagi Grimberg <sagig@...lanox.com>
Subject: [PATCH net-next 1/6] net/mlx4_en: Fix set port ratelimit for 40GE

From: Eugenia Emantayev <eugenia@...lanox.com>

In 40GE we can't use the default bw units for set ratelimit (100 Mbps)
since the max is 255*100 Mbps = 25 Gbps (not suited for 40GE), thus we need 1 Gbps units.
But for 10GE 1 Gbps units might be too bruit so we use the following solution.

For user set ratelimit <= 25 Gbps:
        use 100 Mbps units * user_ratelimit (* 10).

For user set ratelimit > 25 Gbps:
        use 1 Gbps units * user_ratelimit.

For user set unlimited ratelimit (0 Gbps):
        use 1 Gbps units * MAX_RATELIMIT_DEFAULT (57)

Note: any value > 58 will damage the FW ratelimit computation, so we allow
      a max and any higher value will be pulled down to 57.


Signed-off-by: Sagi Grimberg <sagig@...lanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@...lanox.com>
Signed-off-by: Amir Vadai <amirv@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/mlx4.h |  5 -----
 drivers/net/ethernet/mellanox/mlx4/port.c | 22 +++++++++++++++++-----
 include/linux/mlx4/device.h               | 11 +++++++++++
 3 files changed, 28 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 1d8af73..13fbcd0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -62,11 +62,6 @@
 
 #define INIT_HCA_TPT_MW_ENABLE          (1 << 7)
 
-#define MLX4_NUM_UP		8
-#define MLX4_NUM_TC		8
-#define MLX4_RATELIMIT_UNITS 3 /* 100 Mbps */
-#define MLX4_RATELIMIT_DEFAULT 0xffff
-
 struct mlx4_set_port_prio2tc_context {
 	u8 prio2tc[4];
 };
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index 7ab9717..5d76a60 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -1051,14 +1051,26 @@ int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw,
 
 	for (i = 0; i < MLX4_NUM_TC; i++) {
 		struct mlx4_port_scheduler_tc_cfg_be *tc = &context->tc[i];
-		u16 r = ratelimit && ratelimit[i] ? ratelimit[i] :
-			MLX4_RATELIMIT_DEFAULT;
+		u16 r;
+
+		if (ratelimit && ratelimit[i]) {
+			if (ratelimit[i] <= MLX4_MAX_100M_UNITS_VAL) {
+				r = ratelimit[i];
+				tc->max_bw_units =
+					htons(MLX4_RATELIMIT_100M_UNITS);
+			} else {
+				r = ratelimit[i]/10;
+				tc->max_bw_units =
+					htons(MLX4_RATELIMIT_1G_UNITS);
+			}
+			tc->max_bw_value = htons(r);
+		} else {
+			tc->max_bw_value = htons(MLX4_RATELIMIT_DEFAULT);
+			tc->max_bw_units = htons(MLX4_RATELIMIT_1G_UNITS);
+		}
 
 		tc->pg = htons(pg[i]);
 		tc->bw_precentage = htons(tc_tx_bw[i]);
-
-		tc->max_bw_units = htons(MLX4_RATELIMIT_UNITS);
-		tc->max_bw_value = htons(r);
 	}
 
 	in_mod = MLX4_SET_PORT_SCHEDULER << 8 | port;
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index b12f4bb..db0aef3 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -48,6 +48,17 @@
 #define MSIX_LEGACY_SZ		4
 #define MIN_MSIX_P_PORT		5
 
+#define MLX4_NUM_UP			8
+#define MLX4_NUM_TC			8
+#define MLX4_MAX_100M_UNITS_VAL		255	/*
+						 * work around: can't set values
+						 * greater then this value when
+						 * using 100 Mbps units.
+						 */
+#define MLX4_RATELIMIT_100M_UNITS	3	/* 100 Mbps */
+#define MLX4_RATELIMIT_1G_UNITS		4	/* 1 Gbps */
+#define MLX4_RATELIMIT_DEFAULT		0x00ff
+
 #define MLX4_ROCE_MAX_GIDS	128
 #define MLX4_ROCE_PF_GIDS	16
 
-- 
1.8.3.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html