netdev - Re: [PATCH RFCv2] arm64: eBPF JIT compiler

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMEtUuydrYMGdg2zNDYX4vKL0_-reF+yOPKx5hpUvy4guuVeBg@mail.gmail.com>
Date:	Tue, 8 Jul 2014 02:24:17 -0700
From:	Alexei Starovoitov <ast@...mgrid.com>
To:	Zi Shen Lim <zlim.lnx@...il.com>
Cc:	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	"David S. Miller" <davem@...emloft.net>,
	Daniel Borkmann <dborkman@...hat.com>,
	Chema Gonzalez <chema@...gle.com>,
	LKML <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	Network Development <netdev@...r.kernel.org>
Subject: Re: [PATCH RFCv2] arm64: eBPF JIT compiler

On Tue, Jul 8, 2014 at 12:06 AM, Zi Shen Lim <zlim.lnx@...il.com> wrote:
> The JIT compiler emits A64 instructions. It supports eBPF only.
> Legacy BPF is supported thanks to conversion by BPF core.
>
> JIT is enabled in the same way as for other architectures:
>
>         echo 1 > /proc/sys/net/core/bpf_jit_enable
>
> Or for additional compiler output:
>
>         echo 2 > /proc/sys/net/core/bpf_jit_enable
>
> See Documentation/networking/filter.txt for more information.
>
> The implementation passes all 57 tests in lib/test_bpf.c
> on ARMv8 Foundation Model :)
>
> Signed-off-by: Zi Shen Lim <zlim.lnx@...il.com>
>
> ---
> RFCv1->RFCv2:
>
>   Addressed review comments from Alexei:
>   - use core-$(CONFIG_NET)
>   - use GENMASK
>   - lower-case function names in header file
>   - drop LD_ABS+DW and LD_IND+DW, which do not exist in eBPF yet
>   - use pr_xxx_once() to prevent spamming logs
>   - clarify 16B stack alignment requirement
>   - drop usage of EMIT macro which was saving just one argument,
>     turns out having additional argument wasn't too much of an eyesore
>
>   Also, per discussion with Alexei, and additional suggestion from
>   Daniel:
>   - moved load_pointer() from net/core/filter.c into filter.h
>     as bpf_load_pointer()
>   which is done as a separate preparatory patch. [1]
>
> [1] http://patchwork.ozlabs.org/patch/366906/

Just to clarify. This patch is on top of [1]

> +       /* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + src + imm)) */
> +       case BPF_LD | BPF_IND | BPF_W:
> +       case BPF_LD | BPF_IND | BPF_H:
> +       case BPF_LD | BPF_IND | BPF_B:
> +       {
> +               const u8 r0 = bpf2a64[BPF_REG_0]; /* r0 = return value */
> +               const u8 r6 = bpf2a64[BPF_REG_6]; /* r6 = pointer to sk_buff */
> +               const u8 fp = bpf2a64[BPF_REG_FP];
> +               const u8 r1 = bpf2a64[BPF_REG_1]; /* r1: struct sk_buff *skb */
> +               const u8 r2 = bpf2a64[BPF_REG_2]; /* r2: int k */
> +               const u8 r3 = bpf2a64[BPF_REG_3]; /* r3: unsigned int size */
> +               const u8 r4 = bpf2a64[BPF_REG_4]; /* r4: void *buffer */
> +               const u8 r5 = bpf2a64[BPF_REG_5]; /* r5: void *(*func)(...) */
> +               int size;
> +
> +               emit(A64_MOV(1, r1, r6), ctx);
> +               emit_a64_mov_i(0, r2, imm, ctx);
> +               if (BPF_MODE(code) == BPF_IND)
> +                       emit(A64_ADD(0, r2, r2, src), ctx);
> +               switch (BPF_SIZE(code)) {
> +               case BPF_W:
> +                       size = 4;
> +                       break;
> +               case BPF_H:
> +                       size = 2;
> +                       break;
> +               case BPF_B:
> +                       size = 1;
> +                       break;
> +               default:
> +                       return -EINVAL;
> +               }
> +               emit_a64_mov_i64(r3, size, ctx);
> +               emit(A64_ADD_I(1, r4, fp, MAX_BPF_STACK), ctx);
> +               emit_a64_mov_i64(r5, (unsigned long)bpf_load_pointer, ctx);
> +               emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx);
> +               emit(A64_MOV(1, A64_FP, A64_SP), ctx);
> +               emit(A64_BLR(r5), ctx);
> +               emit(A64_MOV(1, r0, A64_R(0)), ctx);
> +               emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx);
> +
> +               jmp_offset = epilogue_offset(ctx);
> +               check_imm19(jmp_offset);
> +               emit(A64_CBZ(1, r0, jmp_offset), ctx);
> +               emit(A64_MOV(1, r5, r0), ctx);
> +               switch (BPF_SIZE(code)) {
> +               case BPF_W:
> +                       emit(A64_LDR32(r0, r5, A64_ZR), ctx);
> +#ifndef CONFIG_CPU_BIG_ENDIAN
> +                       emit(A64_REV32(0, r0, r0), ctx);
> +#endif
> +                       break;
> +               case BPF_H:
> +                       emit(A64_LDRH(r0, r5, A64_ZR), ctx);
> +#ifndef CONFIG_CPU_BIG_ENDIAN
> +                       emit(A64_REV16(0, r0, r0), ctx);
> +#endif
> +                       break;
> +               case BPF_B:
> +                       emit(A64_LDRB(r0, r5, A64_ZR), ctx);
> +                       break;
> +               case BPF_DW:

this case can be removed too.

Acked-by: Alexei Starovoitov <ast@...mgrid.com>

Great work. Thanks.

> +                       emit(A64_LDR64(r0, r5, A64_ZR), ctx);
> +#ifndef CONFIG_CPU_BIG_ENDIAN
> +                       emit(A64_REV64(r0, r0), ctx);
> +#endif
> +                       break;
> +               }
> +               break;
> +       }
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html