lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 12 Jul 2014 20:09:41 +0200
From:	Fabian Frederick <fabf@...net.be>
To:	linux-kernel@...r.kernel.org
Cc:	davem@...emloft.net, joe@...ches.com,
	Fabian Frederick <fabf@...net.be>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Bruce Allan <bruce.w.allan@...el.com>,
	Carolyn Wyborny <carolyn.wyborny@...el.com>,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Greg Rose <gregory.v.rose@...el.com>,
	Alex Duyck <alexander.h.duyck@...el.com>,
	John Ronciak <john.ronciak@...el.com>,
	Mitch Williams <mitch.a.williams@...el.com>,
	Linux NICS <linux.nics@...el.com>,
	e1000-devel@...ts.sourceforge.net, netdev@...r.kernel.org
Subject: [PATCH V2 2/9] ixgbe: remove unnecessary break after goto

Signed-off-by: Fabian Frederick <fabf@...net.be>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  | 4 ----
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 --
 3 files changed, 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 1560933..206171f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -430,7 +430,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
-		break;
 	}
 
 	/* Set 802.3x based flow control settings. */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index bc7c924..0373a5b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -432,7 +432,6 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	default:
 		status = IXGBE_ERR_LINK_SETUP;
 		goto out;
-		break;
 	}
 
 	if (hw->phy.multispeed_fiber) {
@@ -2035,7 +2034,6 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
 		goto out;
-		break;
 	case IXGBE_AUTOC_LMS_10G_SERIAL:
 		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
@@ -2052,10 +2050,8 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
 		goto out;
-		break;
 	default:
 		goto out;
-		break;
 	}
 
 sfp_check:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 4e5385a..3f318c5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -216,7 +216,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
-		break;
 	}
 
 	if (hw->mac.type != ixgbe_mac_X540) {
@@ -2179,7 +2178,6 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
-		break;
 	}
 
 	/* Set 802.3x based flow control settings. */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists