[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8sNcWFdzRws5NkBwwiAb6KymZZHqFLh4Hsqsip3vaRj2g@mail.gmail.com>
Date: Wed, 16 Jul 2014 20:23:17 +0100
From: Prabhakar Lad <prabhakar.csengg@...il.com>
To: Grygorii Strashko <grygorii.strashko@...com>
Cc: "David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Santosh Shilimkar <santosh.shilimkar@...com>,
netdev <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
Rob Herring <robh+dt@...nel.org>,
LKML <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
dlos <davinci-linux-open-source@...ux.davincidsp.com>,
Mugunthan V N <mugunthanvnm@...com>
Subject: Re: [PATCH v2 2/2] net: davinci_mdio: allow to create phys from dt
On Wed, Jul 16, 2014 at 1:13 PM, Grygorii Strashko
<grygorii.strashko@...com> wrote:
> This patch allows to create PHYs from DT in case
> if they are explicitly defined. The of_mdiobus_register() is
> used for such purposes.
>
> For backward compatibility, call of_mdiobus_register() only in case
> if at least one PHY's child is defined in DT, otherwise rollback to
> mdiobus_register().
>
> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@...com>
> Acked-by: Mugunthan V N <mugunthanvnm@...com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
Reviewed-by: Lad, Prabhakar <prabhakar.csengg@...il.com>
Thanks,
--Prabhakar Lad
> ---
> Hi Santosh,
>
> I haven't changed style for long-comments, because Networking subsystem
> requires first line of comment not to be empty:
> WARNING:NETWORKING_BLOCK_COMMENT_STYLE: networking block comments don't use an empty /* line, use /* Comment...
>
> drivers/net/ethernet/ti/davinci_mdio.c | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
> index 735dc53..2791f6f 100644
> --- a/drivers/net/ethernet/ti/davinci_mdio.c
> +++ b/drivers/net/ethernet/ti/davinci_mdio.c
> @@ -38,6 +38,7 @@
> #include <linux/davinci_emac.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_mdio.h>
> #include <linux/pinctrl/consumer.h>
>
> /*
> @@ -95,6 +96,10 @@ struct davinci_mdio_data {
> struct mii_bus *bus;
> bool suspended;
> unsigned long access_time; /* jiffies */
> + /* Indicates that driver shouldn't modify phy_mask in case
> + * if MDIO bus is registered from DT.
> + */
> + bool skip_scan;
> };
>
> static void __davinci_mdio_reset(struct davinci_mdio_data *data)
> @@ -144,6 +149,9 @@ static int davinci_mdio_reset(struct mii_bus *bus)
> dev_info(data->dev, "davinci mdio revision %d.%d\n",
> (ver >> 8) & 0xff, ver & 0xff);
>
> + if (data->skip_scan)
> + return 0;
> +
> /* get phy mask from the alive register */
> phy_mask = __raw_readl(&data->regs->alive);
> if (phy_mask) {
> @@ -369,8 +377,17 @@ static int davinci_mdio_probe(struct platform_device *pdev)
> goto bail_out;
> }
>
> - /* register the mii bus */
> - ret = mdiobus_register(data->bus);
> + /* register the mii bus
> + * Create PHYs from DT only in case if PHY child nodes are explicitly
> + * defined to support backward compatibility with DTs which assume that
> + * Davinci MDIO will always scan the bus for PHYs detection.
> + */
> + if (dev->of_node && of_get_child_count(dev->of_node)) {
> + data->skip_scan = true;
> + ret = of_mdiobus_register(data->bus, dev->of_node);
> + } else {
> + ret = mdiobus_register(data->bus);
> + }
> if (ret)
> goto bail_out;
>
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists