[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1407442256-7308-1-git-send-email-anish@chelsio.com>
Date: Thu, 7 Aug 2014 13:10:56 -0700
From: Anish Bhatt <anish@...lsio.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, hariprasad@...lsio.com, leedom@...lsio.com,
Anish Bhatt <anish@...lsio.com>
Subject: [PATCH net-next] cxgb4: IEEE fixes for DCBx state machine
* Changes required due to 16eecd9be4b05 ("dcbnl : Fix misleading
dcb_app->priority explanation")
* Driver was previously not aware of what DCBx version was negotiated by
firmware, this could lead to DCB app table in kernel or in firmware being
populated wrong since IEEE/CEE used different formats made clear by above
mentioned commit, both cases addressed.
* Driver was missing a couple of state transitions that could be caused
by other drivers that use chelsio hardware, resulting in incorrect behaviour
(the change that addresses this also flips the state machine to switch on
state instead of transition, hope this is okay in current window)
* Prio queue info & tsa is no longer thrown away
Signed-off-by: Anish Bhatt <anish@...lsio.com>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 3 +
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 260 +++++++++++++++++-------
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h | 10 +
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +
drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 12 +-
5 files changed, 216 insertions(+), 71 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index c9b922cc3e67..7c5e3eb4ab4b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -522,6 +522,9 @@ struct sge_txq {
struct sge_eth_txq { /* state for an SGE Ethernet Tx queue */
struct sge_txq q;
struct netdev_queue *txq; /* associated netdev TX queue */
+#ifdef CONFIG_CHELSIO_T4_DCB
+ u8 dcb_prio; /* DCB Priority bound to queue */
+#endif
unsigned long tso; /* # of TSO requests */
unsigned long tx_cso; /* # of Tx checksum offloads */
unsigned long vlan_ins; /* # of Tx VLAN insertions */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
index 0d3a9df5be36..2c5ceea3e89a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -20,6 +20,17 @@
#include "cxgb4.h"
+/* DCBx version control
+ */
+char *dcb_ver_array[] = {
+ "Unknown",
+ "DCBx-CIN",
+ "DCBx-CEE 1.01",
+ "DCBx-IEEE",
+ "", "", "",
+ "Auto Negotiated"
+};
+
/* Initialize a port's Data Center Bridging state. Typically used after a
* Link Down event.
*/
@@ -27,25 +38,45 @@ void cxgb4_dcb_state_init(struct net_device *dev)
{
struct port_info *pi = netdev2pinfo(dev);
struct port_dcb_info *dcb = &pi->dcb;
+ int version_temp = dcb->dcb_version;
memset(dcb, 0, sizeof(struct port_dcb_info));
dcb->state = CXGB4_DCB_STATE_START;
+ if (version_temp)
+ dcb->dcb_version = version_temp;
+
+ netdev_info(dev, "%s: Initializing DCB state for port[%d]\n",
+ __func__, pi->port_id);
+}
+
+void cxgb4_dcb_version_init(struct net_device *dev)
+{
+ struct port_info *pi = netdev2pinfo(dev);
+ struct port_dcb_info *dcb = &pi->dcb;
+
+ /* Any writes here are only done on kernels that exlicitly need
+ * a specific version, say < 2.6.38 which only support CEE
+ */
+ dcb->dcb_version = FW_PORT_DCB_VER_AUTO;
}
/* Finite State machine for Data Center Bridging.
*/
void cxgb4_dcb_state_fsm(struct net_device *dev,
- enum cxgb4_dcb_state_input input)
+ enum cxgb4_dcb_state_input transition_to)
{
struct port_info *pi = netdev2pinfo(dev);
struct port_dcb_info *dcb = &pi->dcb;
struct adapter *adap = pi->adapter;
+ enum cxgb4_dcb_state current_state = dcb->state;
- switch (input) {
- case CXGB4_DCB_INPUT_FW_DISABLED: {
- /* Firmware tells us it's not doing DCB */
- switch (dcb->state) {
- case CXGB4_DCB_STATE_START: {
+ netdev_info(dev, "%s: State change from %d to %d for %s\n",
+ __func__, dcb->state, transition_to, dev->name);
+
+ switch (current_state) {
+ case CXGB4_DCB_STATE_START: {
+ switch (transition_to) {
+ case CXGB4_DCB_INPUT_FW_DISABLED: {
/* we're going to use Host DCB */
dcb->state = CXGB4_DCB_STATE_HOST;
dcb->supported = CXGB4_DCBX_HOST_SUPPORT;
@@ -53,48 +84,62 @@ void cxgb4_dcb_state_fsm(struct net_device *dev,
break;
}
- case CXGB4_DCB_STATE_HOST: {
- /* we're alreaady in Host DCB mode */
+ case CXGB4_DCB_INPUT_FW_ENABLED: {
+ /* we're going to use Firmware DCB */
+ dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
+ dcb->supported = CXGB4_DCBX_FW_SUPPORT;
+ break;
+ }
+
+ case CXGB4_DCB_INPUT_FW_INCOMPLETE: {
+ /* expected transition */
+ break;
+ }
+
+ case CXGB4_DCB_INPUT_FW_ALLSYNCED: {
+ dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED;
break;
}
default:
- goto bad_state_transition;
+ goto bad_state_input;
}
break;
}
- case CXGB4_DCB_INPUT_FW_ENABLED: {
- /* Firmware tells us that it is doing DCB */
- switch (dcb->state) {
- case CXGB4_DCB_STATE_START: {
- /* we're going to use Firmware DCB */
- dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
- dcb->supported = CXGB4_DCBX_FW_SUPPORT;
+ case CXGB4_DCB_STATE_FW_INCOMPLETE: {
+ switch (transition_to) {
+ case CXGB4_DCB_INPUT_FW_ENABLED: {
+ /* we're alreaady in firmware DCB mode */
break;
}
- case CXGB4_DCB_STATE_FW_INCOMPLETE:
- case CXGB4_DCB_STATE_FW_ALLSYNCED: {
- /* we're alreaady in firmware DCB mode */
+ case CXGB4_DCB_INPUT_FW_INCOMPLETE: {
+ /* we're already incomplete */
+ break;
+ }
+
+ case CXGB4_DCB_INPUT_FW_ALLSYNCED: {
+ dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED;
+ dcb->enabled = 1;
+ linkwatch_fire_event(dev);
break;
}
default:
- goto bad_state_transition;
+ goto bad_state_input;
}
break;
}
- case CXGB4_DCB_INPUT_FW_INCOMPLETE: {
- /* Firmware tells us that its DCB state is incomplete */
- switch (dcb->state) {
- case CXGB4_DCB_STATE_FW_INCOMPLETE: {
- /* we're already incomplete */
+ case CXGB4_DCB_STATE_FW_ALLSYNCED: {
+ switch (transition_to) {
+ case CXGB4_DCB_INPUT_FW_ENABLED: {
+ /* we're alreaady in firmware DCB mode */
break;
}
- case CXGB4_DCB_STATE_FW_ALLSYNCED: {
+ case CXGB4_DCB_INPUT_FW_INCOMPLETE: {
/* We were successfully running with firmware DCB but
* now it's telling us that it's in an "incomplete
* state. We need to reset back to a ground state
@@ -107,46 +152,48 @@ void cxgb4_dcb_state_fsm(struct net_device *dev,
break;
}
- default:
- goto bad_state_transition;
- }
- break;
- }
-
- case CXGB4_DCB_INPUT_FW_ALLSYNCED: {
- /* Firmware tells us that its DCB state is complete */
- switch (dcb->state) {
- case CXGB4_DCB_STATE_FW_INCOMPLETE: {
- dcb->state = CXGB4_DCB_STATE_FW_ALLSYNCED;
+ case CXGB4_DCB_INPUT_FW_ALLSYNCED: {
+ /* we're already all sync'ed
+ * this is only applicable for IEEE or
+ * when another VI already completed negotiaton
+ */
dcb->enabled = 1;
linkwatch_fire_event(dev);
break;
}
- case CXGB4_DCB_STATE_FW_ALLSYNCED: {
- /* we're already all sync'ed */
+ default:
+ goto bad_state_input;
+ }
+ break;
+ }
+
+ case CXGB4_DCB_STATE_HOST: {
+ switch (transition_to) {
+ case CXGB4_DCB_INPUT_FW_DISABLED: {
+ /* we're alreaady in Host DCB mode */
break;
}
default:
- goto bad_state_transition;
+ goto bad_state_input;
}
break;
}
default:
- goto bad_state_input;
+ goto bad_state_transition;
}
return;
bad_state_input:
dev_err(adap->pdev_dev, "cxgb4_dcb_state_fsm: illegal input symbol %d\n",
- input);
+ transition_to);
return;
bad_state_transition:
dev_err(adap->pdev_dev, "cxgb4_dcb_state_fsm: bad state transition, state = %d, input = %d\n",
- dcb->state, input);
+ current_state, transition_to);
}
/* Handle a DCB/DCBX update message from the firmware.
@@ -160,6 +207,7 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
struct port_info *pi = netdev_priv(dev);
struct port_dcb_info *dcb = &pi->dcb;
int dcb_type = pcmd->u.dcb.pgid.type;
+ int dcb_running_version;
/* Handle Firmware DCB Control messages separately since they drive
* our state machine.
@@ -171,6 +219,25 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
? CXGB4_DCB_STATE_FW_ALLSYNCED
: CXGB4_DCB_STATE_FW_INCOMPLETE);
+ if (dcb->dcb_version != FW_PORT_DCB_VER_UNKNOWN) {
+ dcb_running_version = FW_PORT_CMD_DCB_VERSION_GET(
+ be16_to_cpu(
+ pcmd->u.dcb.control.dcb_version_to_app_state));
+ if (dcb_running_version == FW_PORT_DCB_VER_CEE1D01 ||
+ dcb_running_version == FW_PORT_DCB_VER_IEEE) {
+ dcb->dcb_version = dcb_running_version;
+ dev_warn(adap->pdev_dev, "Interface %s is running %s\n",
+ dev->name,
+ dcb_ver_array[dcb->dcb_version]);
+ } else {
+ dev_warn(adap->pdev_dev,
+ "Something screwed up, requested firmware for %s, but firmware returned %s instead\n",
+ dcb_ver_array[dcb->dcb_version],
+ dcb_ver_array[dcb_running_version]);
+ dcb->dcb_version = FW_PORT_DCB_VER_UNKNOWN;
+ }
+ }
+
cxgb4_dcb_state_fsm(dev, input);
return;
}
@@ -199,7 +266,11 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
dcb->pg_num_tcs_supported = fwdcb->pgrate.num_tcs_supported;
memcpy(dcb->pgrate, &fwdcb->pgrate.pgrate,
sizeof(dcb->pgrate));
+ memcpy(dcb->tsa, &fwdcb->pgrate.tsa,
+ sizeof(dcb->tsa));
dcb->msgs |= CXGB4_DCB_FW_PGRATE;
+ if (dcb->msgs & CXGB4_DCB_FW_PGID)
+ IEEE_FAUX_SYNC(dev, dcb);
break;
case FW_PORT_DCB_TYPE_PRIORATE:
@@ -212,6 +283,7 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
dcb->pfcen = fwdcb->pfc.pfcen;
dcb->pfc_num_tcs_supported = fwdcb->pfc.max_pfc_tcs;
dcb->msgs |= CXGB4_DCB_FW_PFC;
+ IEEE_FAUX_SYNC(dev, dcb);
break;
case FW_PORT_DCB_TYPE_APP_ID: {
@@ -220,13 +292,25 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
struct app_priority *ap = &dcb->app_priority[idx];
struct dcb_app app = {
- .selector = fwap->sel_field,
.protocol = be16_to_cpu(fwap->protocolid),
- .priority = fwap->user_prio_map,
};
int err;
- err = dcb_setapp(dev, &app);
+ /* Convert from firmware format to relevant format
+ * when using app selector
+ */
+ if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE) {
+ app.selector = (fwap->sel_field + 1);
+ app.priority = ffs(fwap->user_prio_map) - 1;
+ err = dcb_ieee_setapp(dev, &app);
+ IEEE_FAUX_SYNC(dev, dcb);
+ } else {
+ /* Default is CEE */
+ app.selector = !!(fwap->sel_field);
+ app.priority = fwap->user_prio_map;
+ err = dcb_setapp(dev, &app);
+ }
+
if (err)
dev_err(adap->pdev_dev,
"Failed DCB Set Application Priority: sel=%d, prot=%d, prio=%d, err=%d\n",
@@ -408,9 +492,10 @@ static void cxgb4_getpgbwgcfg(struct net_device *dev, int pgid, u8 *bw_per,
if (err != FW_PORT_DCB_CFG_SUCCESS) {
dev_err(adap->pdev_dev, "DCB read PGRATE failed with %d\n",
-err);
- } else {
- *bw_per = pcmd.u.dcb.pgrate.pgrate[pgid];
+ return;
}
+
+ *bw_per = pcmd.u.dcb.pgrate.pgrate[pgid];
}
static void cxgb4_getpgbwgcfg_tx(struct net_device *dev, int pgid, u8 *bw_per)
@@ -637,7 +722,8 @@ static int __cxgb4_getapp(struct net_device *dev, u8 app_idtype, u16 app_id,
return err;
}
if (be16_to_cpu(pcmd.u.dcb.app_priority.protocolid) == app_id)
- return pcmd.u.dcb.app_priority.user_prio_map;
+ if (pcmd.u.dcb.app_priority.sel_field == app_idtype)
+ return pcmd.u.dcb.app_priority.user_prio_map;
/* exhausted app list */
if (!pcmd.u.dcb.app_priority.protocolid)
@@ -657,8 +743,8 @@ static int cxgb4_getapp(struct net_device *dev, u8 app_idtype, u16 app_id)
/* Write a new Application User Priority Map for the specified Application ID
*/
-static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id,
- u8 app_prio)
+static int __cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id,
+ u8 app_prio)
{
struct fw_port_cmd pcmd;
struct port_info *pi = netdev2pinfo(dev);
@@ -673,10 +759,6 @@ static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id,
if (!netif_carrier_ok(dev))
return -ENOLINK;
- if (app_idtype != DCB_APP_IDTYPE_ETHTYPE &&
- app_idtype != DCB_APP_IDTYPE_PORTNUM)
- return -EINVAL;
-
for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
INIT_PORT_DCB_READ_LOCAL_CMD(pcmd, pi->port_id);
pcmd.u.dcb.app_priority.type = FW_PORT_DCB_TYPE_APP_ID;
@@ -725,6 +807,30 @@ static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id,
return 0;
}
+/* Priority for CEE inside dcb_app is bitmask, with 0 being an invalid value */
+static int cxgb4_setapp(struct net_device *dev, u8 app_idtype, u16 app_id,
+ u8 app_prio)
+{
+ int ret;
+ struct dcb_app app = {
+ .selector = app_idtype,
+ .protocol = app_id,
+ .priority = app_prio,
+ };
+
+ if (app_idtype != DCB_APP_IDTYPE_ETHTYPE &&
+ app_idtype != DCB_APP_IDTYPE_PORTNUM)
+ return -EINVAL;
+
+ /* Convert app_idtype to a format that firmware understands */
+ ret = __cxgb4_setapp(dev, app_idtype == DCB_APP_IDTYPE_ETHTYPE ?
+ app_idtype : 3, app_id, app_prio);
+ if (ret)
+ return ret;
+
+ return dcb_setapp(dev, &app);
+}
+
/* Return whether IEEE Data Center Bridging has been negotiated.
*/
static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev)
@@ -738,6 +844,7 @@ static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev)
/* Fill in the Application User Priority Map associated with the
* specified Application.
+ * Priority for IEEE dcb_app is an integer, with 0 being a valid value
*/
static int cxgb4_ieee_getapp(struct net_device *dev, struct dcb_app *app)
{
@@ -748,28 +855,39 @@ static int cxgb4_ieee_getapp(struct net_device *dev, struct dcb_app *app)
if (!(app->selector && app->protocol))
return -EINVAL;
- prio = dcb_getapp(dev, app);
- if (prio == 0) {
- /* If app doesn't exist in dcb_app table, try firmware
- * directly.
- */
- prio = __cxgb4_getapp(dev, app->selector, app->protocol, 0);
- }
+ /* Try querying firmware first, use firmware format */
+ prio = __cxgb4_getapp(dev, app->selector - 1, app->protocol, 0);
+
+ if (prio < 0)
+ prio = dcb_ieee_getapp_mask(dev, app);
- app->priority = prio;
+ app->priority = ffs(prio) - 1;
return 0;
}
-/* Write a new Application User Priority Map for the specified App id. */
+/* Write a new Application User Priority Map for the specified Application ID.
+ * Priority for IEEE dcb_app is an integer, with 0 being a valid value
+ */
static int cxgb4_ieee_setapp(struct net_device *dev, struct dcb_app *app)
{
+ int ret;
+
if (!cxgb4_ieee_negotiation_complete(dev))
return -EINVAL;
- if (!(app->selector && app->protocol && app->priority))
+ if (!(app->selector && app->protocol))
+ return -EINVAL;
+
+ if (!(app->selector > IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+ app->selector < IEEE_8021QAZ_APP_SEL_ANY))
return -EINVAL;
- cxgb4_setapp(dev, app->selector, app->protocol, app->priority);
- return dcb_setapp(dev, app);
+ /* change selector to a format that firmware understands */
+ ret = __cxgb4_setapp(dev, app->selector - 1, app->protocol,
+ (1 << app->priority));
+ if (ret)
+ return ret;
+
+ return dcb_ieee_setapp(dev, app);
}
/* Return our DCBX parameters.
@@ -794,8 +912,9 @@ static u8 cxgb4_setdcbx(struct net_device *dev, u8 dcb_request)
!= dcb_request)
return 1;
- /* Can't set DCBX capabilities if DCBX isn't enabled. */
- if (!pi->dcb.state)
+ /* Can't enable DCB if we haven't successfully negotiated it.
+ */
+ if (pi->dcb.state != CXGB4_DCB_STATE_FW_ALLSYNCED)
return 1;
/* There's currently no mechanism to allow for the firmware DCBX
@@ -874,7 +993,8 @@ static int cxgb4_getpeerapp_tbl(struct net_device *dev, struct dcb_app *table)
table[i].selector = pcmd.u.dcb.app_priority.sel_field;
table[i].protocol =
be16_to_cpu(pcmd.u.dcb.app_priority.protocolid);
- table[i].priority = pcmd.u.dcb.app_priority.user_prio_map;
+ table[i].priority =
+ ffs(pcmd.u.dcb.app_priority.user_prio_map) - 1;
}
return err;
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
index 1ec1d834e257..2a6aa88984f4 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
@@ -63,6 +63,13 @@
#define INIT_PORT_DCB_WRITE_CMD(__pcmd, __port) \
INIT_PORT_DCB_CMD(__pcmd, __port, EXEC, FW_PORT_ACTION_L2_DCB_CFG)
+#define IEEE_FAUX_SYNC(__dev, __dcb) \
+ do { \
+ if ((__dcb)->dcb_version == FW_PORT_DCB_VER_IEEE) \
+ cxgb4_dcb_state_fsm((__dev), \
+ CXGB4_DCB_STATE_FW_ALLSYNCED); \
+ } while (0)
+
/* States we can be in for a port's Data Center Bridging.
*/
enum cxgb4_dcb_state {
@@ -108,11 +115,13 @@ struct port_dcb_info {
* Native Endian format).
*/
u32 pgid; /* Priority Group[0..7] */
+ u8 dcb_version; /* Running DCBx version */
u8 pfcen; /* Priority Flow Control[0..7] */
u8 pg_num_tcs_supported; /* max PG Traffic Classes */
u8 pfc_num_tcs_supported; /* max PFC Traffic Classes */
u8 pgrate[8]; /* Priority Group Rate[0..7] */
u8 priorate[8]; /* Priority Rate[0..7] */
+ u8 tsa[8]; /* TSA Algorithm[0..7] */
struct app_priority { /* Application Information */
u8 user_prio_map; /* Priority Map bitfield */
u8 sel_field; /* Protocol ID interpretation */
@@ -121,6 +130,7 @@ struct port_dcb_info {
};
void cxgb4_dcb_state_init(struct net_device *);
+void cxgb4_dcb_version_init(struct net_device *);
void cxgb4_dcb_state_fsm(struct net_device *, enum cxgb4_dcb_state_input);
void cxgb4_dcb_handle_fw_update(struct adapter *, const struct fw_port_cmd *);
void cxgb4_dcb_set_caps(struct adapter *, const struct fw_port_cmd *);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 1a162d21d8ac..a62d3f468c52 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -522,6 +522,8 @@ static void dcb_tx_queue_prio_enable(struct net_device *dev, int enable)
dev_err(adap->pdev_dev,
"Can't %s DCB Priority on port %d, TX Queue %d: err=%d\n",
enable ? "set" : "unset", pi->port_id, i, -err);
+ else
+ txq->dcb_prio = value;
}
}
#endif /* CONFIG_CHELSIO_T4_DCB */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index ff709e3b3e7e..0549170d7e2e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -1629,6 +1629,14 @@ enum fw_port_l2cfg_ctlbf {
FW_PORT_L2_CTLBF_TXIPG = 0x20
};
+enum fw_port_dcb_versions {
+ FW_PORT_DCB_VER_UNKNOWN,
+ FW_PORT_DCB_VER_CEE1D0,
+ FW_PORT_DCB_VER_CEE1D01,
+ FW_PORT_DCB_VER_IEEE,
+ FW_PORT_DCB_VER_AUTO = 7
+};
+
enum fw_port_dcb_cfg {
FW_PORT_DCB_CFG_PG = 0x01,
FW_PORT_DCB_CFG_PFC = 0x02,
@@ -1709,6 +1717,7 @@ struct fw_port_cmd {
__u8 r10_lo[5];
__u8 num_tcs_supported;
__u8 pgrate[8];
+ __u8 tsa[8];
} pgrate;
struct fw_port_dcb_priorate {
__u8 type;
@@ -1735,7 +1744,7 @@ struct fw_port_cmd {
struct fw_port_dcb_control {
__u8 type;
__u8 all_syncd_pkd;
- __be16 pfc_state_to_app_state;
+ __be16 dcb_version_to_app_state;
__be32 r11;
__be64 r12;
} control;
@@ -1778,6 +1787,7 @@ struct fw_port_cmd {
#define FW_PORT_CMD_DCBXDIS (1U << 7)
#define FW_PORT_CMD_APPLY (1U << 7)
#define FW_PORT_CMD_ALL_SYNCD (1U << 7)
+#define FW_PORT_CMD_DCB_VERSION_GET(x) (((x) >> 8) & 0xf)
#define FW_PORT_CMD_PPPEN(x) ((x) << 31)
#define FW_PORT_CMD_TPSRC(x) ((x) << 28)
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists