lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 19 Aug 2014 16:46:34 -0400
From:	Andy Gospodarek <gospo@...ulusnetworks.com>
To:	Jiri Pirko <jiri@...nulli.us>
Cc:	netdev@...r.kernel.org, davem@...emloft.net, j.vosburgh@...il.com,
	vfalico@...il.com, andy@...yhouse.net, nikolay@...hat.com,
	dingtianhong@...wei.com, sfeldma@...ulusnetworks.com
Subject: Re: [patch net-next] bonding: create netlink event when bonding
 option is changed

On Tue, Aug 19, 2014 at 10:37:48PM +0200, Jiri Pirko wrote:
> Tue, Aug 19, 2014 at 10:34:01PM CEST, gospo@...ulusnetworks.com wrote:
> >On Tue, Aug 19, 2014 at 04:02:12PM +0200, Jiri Pirko wrote:
> >> Userspace needs to be notified if one changes some option.
> >> 
> >> Signed-off-by: Jiri Pirko <jiri@...nulli.us>
> >> ---
> >>  drivers/net/bonding/bond_options.c | 2 ++
> >>  include/linux/netdevice.h          | 1 +
> >>  2 files changed, 3 insertions(+)
> >> 
> >> diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
> >> index dc73463..d8dc17f 100644
> >> --- a/drivers/net/bonding/bond_options.c
> >> +++ b/drivers/net/bonding/bond_options.c
> >> @@ -625,6 +625,8 @@ int __bond_opt_set(struct bonding *bond,
> >>  out:
> >>  	if (ret)
> >>  		bond_opt_error_interpret(bond, opt, ret, val);
> >> +	else
> >> +		call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
> >Is this valuable where the configuration change to the bonding driver
> >came from netlink.  Do you have a good example why this useful in the
> >netlink path as well as when using sysfs?  It would seem more logical to
> >add call_netdevice_notifiers to bonding_sysfs_store_option so anything
> >listening to netlink messages or the netlink cache can know to check for
> >changes.
> 
> But this is called for sysfs as well.
Sorry for the confusion.  I was suggesting that this call is *only* used
for sysfs changes not for changes from sysfs and netlink as it would
with your patch.

> Example of use is that application can monitor rtnetlink to see if for
> example active slave changed, or whatever other option changed.
Any application monitoring netlink messages will already know about the
configuration change if it came down via netlink.  There would not be a
need for an extra message.

My question was:  Is there a need for 2 netlink messages to indicate
that a bonding configuration change was needed when the config came over
netlink.  I did not see the need for 2 netlink messages in this case and
was asking for clarification from you.

> 
> >
> >>  
> >>  	return ret;
> >>  }
> >> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
> >> index 967ddcc..44bc4bd 100644
> >> --- a/include/linux/netdevice.h
> >> +++ b/include/linux/netdevice.h
> >> @@ -2017,6 +2017,7 @@ struct pcpu_sw_netstats {
> >>  #define NETDEV_CHANGEUPPER	0x0015
> >>  #define NETDEV_RESEND_IGMP	0x0016
> >>  #define NETDEV_PRECHANGEMTU	0x0017 /* notify before mtu change happened */
> >> +#define NETDEV_CHANGEINFODATA	0x0018
> >>  
> >>  int register_netdevice_notifier(struct notifier_block *nb);
> >>  int unregister_netdevice_notifier(struct notifier_block *nb);
> >> -- 
> >> 1.9.3
> >> 
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe netdev" in
> >> the body of a message to majordomo@...r.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists