| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1408637945-10390-7-git-send-email-jiri@resnulli.us>
Date: Thu, 21 Aug 2014 18:18:59 +0200
From: Jiri Pirko <jiri@...nulli.us>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, nhorman@...driver.com, andy@...yhouse.net,
tgraf@...g.ch, dborkman@...hat.com, ogerlitz@...lanox.com,
jesse@...ira.com, pshelar@...ira.com, azhou@...ira.com,
ben@...adent.org.uk, stephen@...workplumber.org,
jeffrey.t.kirsher@...el.com, vyasevic@...hat.com,
xiyou.wangcong@...il.com, john.r.fastabend@...el.com,
edumazet@...gle.com, jhs@...atatu.com, sfeldma@...ulusnetworks.com,
f.fainelli@...il.com, roopa@...ulusnetworks.com,
linville@...driver.com, dev@...nvswitch.org, jasowang@...hat.com,
ebiederm@...ssion.com, nicolas.dichtel@...nd.com,
ryazanov.s.a@...il.com, buytenh@...tstofly.org,
aviadr@...lanox.com, nbd@...nwrt.org, alexei.starovoitov@...il.com,
Neil.Jerram@...aswitch.com, ronye@...lanox.com
Subject: [patch net-next RFC 06/12] net: introduce dummy switch
Dummy switch implementation using switchdev interface
Signed-off-by: Jiri Pirko <jiri@...nulli.us>
---
drivers/net/Kconfig | 7 +++
drivers/net/Makefile | 1 +
drivers/net/dummyswitch.c | 131 +++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/if_link.h | 9 +++
4 files changed, 148 insertions(+)
create mode 100644 drivers/net/dummyswitch.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c6f6f69..7822c74 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -71,6 +71,13 @@ config DUMMY
To compile this driver as a module, choose M here: the module
will be called dummy.
+config NET_DUMMY_SWITCH
+ tristate "Dummy switch net driver support"
+ depends on NET_SWITCHDEV
+ ---help---
+ To compile this driver as a module, choose M here: the module
+ will be called dummyswitch.
+
config EQUALIZER
tristate "EQL (serial line load balancing) support"
---help---
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 61aefdd..3c835ba 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -7,6 +7,7 @@
#
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_DUMMY) += dummy.o
+obj-$(CONFIG_NET_DUMMY_SWITCH) += dummyswitch.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
diff --git a/drivers/net/dummyswitch.c b/drivers/net/dummyswitch.c
new file mode 100644
index 0000000..9d80c14
--- /dev/null
+++ b/drivers/net/dummyswitch.c
@@ -0,0 +1,131 @@
+/*
+ * drivers/net/dummyswitch.c - Dummy switch device
+ * Copyright (c) 2014 Jiri Pirko <jiri@...nulli.us>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/etherdevice.h>
+#include <linux/switchdev.h>
+
+#include <net/rtnetlink.h>
+
+struct dummyswport_priv {
+ struct netdev_phys_item_id psid;
+};
+
+static netdev_tx_t dummyswport_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static int dummyswport_swdev_get_id(struct net_device *dev,
+ struct netdev_phys_item_id *psid)
+{
+ struct dummyswport_priv *dsp = netdev_priv(dev);
+
+ memcpy(psid, &dsp->psid, sizeof(*psid));
+ return 0;
+}
+
+static int dummyswport_change_carrier(struct net_device *dev, bool new_carrier)
+{
+ if (new_carrier)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ return 0;
+}
+
+static const struct net_device_ops dummyswport_netdev_ops = {
+ .ndo_start_xmit = dummyswport_start_xmit,
+ .ndo_swdev_get_id = dummyswport_swdev_get_id,
+ .ndo_change_carrier = dummyswport_change_carrier,
+};
+
+static void dummyswport_setup(struct net_device *dev)
+{
+ ether_setup(dev);
+
+ /* Initialize the device structure. */
+ dev->netdev_ops = &dummyswport_netdev_ops;
+ dev->destructor = free_netdev;
+
+ /* Fill in device structure with ethernet-generic values. */
+ dev->tx_queue_len = 0;
+ dev->flags |= IFF_NOARP;
+ dev->flags &= ~IFF_MULTICAST;
+ dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+ dev->features |= NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO;
+ dev->features |= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
+ eth_hw_addr_random(dev);
+}
+
+static int dummyswport_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+ if (tb[IFLA_ADDRESS])
+ return -EINVAL;
+ if (!data || !data[IFLA_DYMMYSWPORT_PHYS_SWITCH_ID])
+ return -EINVAL;
+ return 0;
+}
+
+static int dummyswport_newlink(struct net *src_net, struct net_device *dev,
+ struct nlattr *tb[], struct nlattr *data[])
+{
+ struct dummyswport_priv *dsp = netdev_priv(dev);
+ int err;
+
+ dsp->psid.id_len = nla_len(data[IFLA_DYMMYSWPORT_PHYS_SWITCH_ID]);
+ memcpy(dsp->psid.id, nla_data(data[IFLA_DYMMYSWPORT_PHYS_SWITCH_ID]),
+ dsp->psid.id_len);
+
+ err = register_netdevice(dev);
+ if (err)
+ return err;
+
+ netif_carrier_on(dev);
+
+ return 0;
+}
+
+static const struct nla_policy dummyswport_policy[IFLA_DUMMYSWPORT_MAX + 1] = {
+ [IFLA_DYMMYSWPORT_PHYS_SWITCH_ID] = { .type = NLA_BINARY,
+ .len = MAX_PHYS_ITEM_ID_LEN },
+};
+
+static struct rtnl_link_ops dummyswport_link_ops __read_mostly = {
+ .kind = "dummyswport",
+ .priv_size = sizeof(struct dummyswport_priv),
+ .setup = dummyswport_setup,
+ .validate = dummyswport_validate,
+ .newlink = dummyswport_newlink,
+ .policy = dummyswport_policy,
+ .maxtype = IFLA_DUMMYSWPORT_MAX,
+};
+
+static int __init dummysw_module_init(void)
+{
+ return rtnl_link_register(&dummyswport_link_ops);
+}
+
+static void __exit dummysw_module_exit(void)
+{
+ rtnl_link_unregister(&dummyswport_link_ops);
+}
+
+module_init(dummysw_module_init);
+module_exit(dummysw_module_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jiri Pirko <jiri@...nulli.us>");
+MODULE_DESCRIPTION("Dummy switch device");
+MODULE_ALIAS_RTNL_LINK("dummyswport");
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index fe6c4c5..e7e122b 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -562,4 +562,13 @@ enum {
#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1)
+/* DUMMYSWPORT section */
+enum {
+ IFLA_DUMMYSWPORT_UNSPEC,
+ IFLA_DYMMYSWPORT_PHYS_SWITCH_ID,
+ __IFLA_DUMMYSWPORT_MAX,
+};
+
+#define IFLA_DUMMYSWPORT_MAX (__IFLA_DUMMYSWPORT_MAX - 1)
+
#endif /* _UAPI_LINUX_IF_LINK_H */
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists