Date:	Wed, 27 Aug 2014 17:04:45 -0700
From:	Florian Fainelli <f.fainelli@...il.com>
To:	netdev@...r.kernel.org
Cc:	Florian Fainelli <f.fainelli@...il.com>, davem@...emloft.net,
	linville@...driver.com, jhs@...atatu.com, alexander.duyck@...il.com
Subject: [PATCH net-next v5 00/13] dsa: Broadcom Starfighter 2 switch support

Hi all,

This patch series adds support for the Broadcom Starfighter 2 (Roboswitch
successor) using the existing DSA infrastructure. This integrated switch
is heavily used in Set Top Box, Cable gateways and DSL gateways products
from Broadcom, and to a larger extent the new ARM-based Wi-Fi routers although
slightly differently.

Changes in v5 are the introduction of ETH_P_XDSA as suggested by Alexander to
help capture applications see this is a multiplexed DSA approach now.

Changes in v4 are the introducing of an indirection level for DSA switch tag
protocols receive and transmit functions.

I intentionnaly did not address one comment from Alexander who suggested to
move port_names and port_dn in a separate structure since that involves
touching arch/arm/ and arch/blackfin/ code which I am not yet comfortable
doing.

Notable changes in v3 is the preliminary patch that reworks the skb->protocol
override helpers for non-Ethertype switch tags, based on feedback from
Alexander Duyck.

The biggest changes from v1 of this patch series are:

- use the new fixed PHY helpers
- improved the switch driver with more complete features (interrupts,
  (RG)MII configuration, memory arrays power down/up, port disabling/enable
  VLAN separation

Future work will focus on bringing the upstream driver in feature parity with
the current downstream driver, including:

- adding Wake-on-LAN support to the switch
- adding suspend/resume callbacks for S2/S3 Power Management modes
- extending the switch register interface to cover BCM5310X SoCs

Florian Fainelli (13):
  net: dsa: reduce number of protocol hooks
  net: phy: add generic UniMAC MDIO bus driver
  net: phy: provide stub for fixed_phy_set_link_update
  net: dsa: provide a switch device device tree node pointer
  net: dsa: retain a per-port device_node pointer
  net: dsa: allow for more complex PHY setups
  net: dsa: allow switches to work without tagging
  net: dsa: allow drivers to do link adjustment
  net: dsa: allow updating fixed PHY link information
  net: dsa: add Broadcom tag RX/TX handler
  net: dsa: add Broadcom SF2 switch driver
  Documentation: devicetree: update dsa binding with optional properties
  Documentation: devicetree: add Broadcom Starfighter 2 binding

 .../bindings/net/broadcom-mdio-unimac.txt          |  39 ++
 .../devicetree/bindings/net/broadcom-sf2.txt       |  78 +++
 Documentation/devicetree/bindings/net/dsa/dsa.txt  |  17 +
 drivers/net/dsa/Kconfig                            |  11 +
 drivers/net/dsa/Makefile                           |   1 +
 drivers/net/dsa/bcm_sf2.c                          | 626 +++++++++++++++++++++
 drivers/net/dsa/bcm_sf2.h                          | 140 +++++
 drivers/net/dsa/bcm_sf2_regs.h                     | 227 ++++++++
 drivers/net/phy/Kconfig                            |   8 +
 drivers/net/phy/Makefile                           |   1 +
 drivers/net/phy/mdio-bcm-unimac.c                  | 212 +++++++
 include/linux/netdevice.h                          |  26 +-
 include/linux/phy_fixed.h                          |  17 +-
 include/net/dsa.h                                  |  43 +-
 include/uapi/linux/if_ether.h                      |   1 +
 net/dsa/Kconfig                                    |   3 +
 net/dsa/Makefile                                   |   1 +
 net/dsa/dsa.c                                      |  48 +-
 net/dsa/dsa_priv.h                                 |  16 +-
 net/dsa/slave.c                                    | 165 ++++--
 net/dsa/tag_brcm.c                                 | 173 ++++++
 net/dsa/tag_dsa.c                                  |   8 +-
 net/dsa/tag_edsa.c                                 |   8 +-
 net/dsa/tag_trailer.c                              |   8 +-
 net/ethernet/eth.c                                 |   7 +-
 25 files changed, 1772 insertions(+), 112 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt
 create mode 100644 Documentation/devicetree/bindings/net/broadcom-sf2.txt
 create mode 100644 drivers/net/dsa/bcm_sf2.c
 create mode 100644 drivers/net/dsa/bcm_sf2.h
 create mode 100644 drivers/net/dsa/bcm_sf2_regs.h
 create mode 100644 drivers/net/phy/mdio-bcm-unimac.c
 create mode 100644 net/dsa/tag_brcm.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists