[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1409263863-5364-1-git-send-email-f.fainelli@gmail.com>
Date: Thu, 28 Aug 2014 15:11:03 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next] net: systemport: tell RXCHK if we are using Broadcom tags
When Broadcom tags are enabled, e.g: when interfaced to an Ethernet
switch, make sure that we tell the RXCHK engine that it should be
expecting a 4-bytes Broadcom tag after the Ethernet MAC Source Address.
Use netdev_uses_dsa() to check for that condition since that will tell
us if a switch is attached to our network interface.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 6f4e18644bd4..8f91de169663 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -139,6 +139,15 @@ static int bcm_sysport_set_rx_csum(struct net_device *dev,
else
reg &= ~RXCHK_SKIP_FCS;
+ /* If Broadcom tags are enabled (e.g: using a switch), make
+ * sure we tell the RXCHK hardware to expect a 4-bytes Broadcom
+ * tag after the Ethernet MAC Source Address.
+ */
+ if (netdev_uses_dsa(dev))
+ reg |= RXCHK_BRCM_TAG_EN;
+ else
+ reg &= ~RXCHK_BRCM_TAG_EN;
+
rxchk_writel(priv, reg, RXCHK_CONTROL);
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists