netdev - Re: [PATCH 3/8] staging: et131x: Use for loop to initialise contiguous registers to zero

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20140831161108.GA30925@kroah.com>
Date:	Sun, 31 Aug 2014 09:11:08 -0700
From:	Greg KH <gregkh@...uxfoundation.org>
To:	Mark Einon <mark.einon@...il.com>
Cc:	devel@...verdev.osuosl.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/8] staging: et131x: Use for loop to initialise
 contiguous registers to zero

On Sun, Aug 31, 2014 at 03:25:03PM +0100, Mark Einon wrote:
> On Sat, Aug 30, 2014 at 01:32:16PM -0700, Greg KH wrote:
> > On Wed, Aug 20, 2014 at 11:17:53PM +0100, Mark Einon wrote:
> > > Replace a long list of contiguous writel() calls with a for loop iterating
> > > over the same values.
> > > 
> > > Signed-off-by: Mark Einon <mark.einon@...il.com>
> > > ---
> > >  drivers/staging/et131x/et131x.c | 27 +++------------------------
> > >  1 file changed, 3 insertions(+), 24 deletions(-)
> > > 
> > > diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
> > > index fffe763..44cc684 100644
> > > --- a/drivers/staging/et131x/et131x.c
> > > +++ b/drivers/staging/et131x/et131x.c
> > > @@ -1138,6 +1138,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
> > >  	u32 sa_lo;
> > >  	u32 sa_hi = 0;
> > >  	u32 pf_ctrl = 0;
> > > +	u32 *wolw;
> > >  
> > >  	/* Disable the MAC while it is being configured (also disable WOL) */
> > >  	writel(0x8, &rxmac->ctrl);
> > > @@ -1151,30 +1152,8 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
> > >  	 * its default Values of 0x00000000 because there are not WOL masks
> > >  	 * as of this time.
> > >  	 */
> > > -	writel(0, &rxmac->mask0_word0);
> > > -	writel(0, &rxmac->mask0_word1);
> > > -	writel(0, &rxmac->mask0_word2);
> > > -	writel(0, &rxmac->mask0_word3);
> > > -
> > > -	writel(0, &rxmac->mask1_word0);
> > > -	writel(0, &rxmac->mask1_word1);
> > > -	writel(0, &rxmac->mask1_word2);
> > > -	writel(0, &rxmac->mask1_word3);
> > > -
> > > -	writel(0, &rxmac->mask2_word0);
> > > -	writel(0, &rxmac->mask2_word1);
> > > -	writel(0, &rxmac->mask2_word2);
> > > -	writel(0, &rxmac->mask2_word3);
> > > -
> > > -	writel(0, &rxmac->mask3_word0);
> > > -	writel(0, &rxmac->mask3_word1);
> > > -	writel(0, &rxmac->mask3_word2);
> > > -	writel(0, &rxmac->mask3_word3);
> > > -
> > > -	writel(0, &rxmac->mask4_word0);
> > > -	writel(0, &rxmac->mask4_word1);
> > > -	writel(0, &rxmac->mask4_word2);
> > > -	writel(0, &rxmac->mask4_word3);
> > > +	for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++)
> > > +		writel(0, wolw);
> > 
> > You are now only writing to all locations 1 time, instead of 4 times,
> > like before, are you sure that is ok?  Hardware is flaky, sometimes it
> > wants to be written to multiple times...
> 
> Hi Greg,
> 
> Thanks for the review.
> 
> As far as my understanding goes, the new code is equivalent to the old
> code - it's a little confusing that the name refers to a word, but the
> masks are all 32 bit values, and the loop iterates over the contiguous
> list of masks found in txmac_regs (et131x.h:891 - the masks are also
> unused in the driver after being set).
> 
> Or am I missing something here?

No, I was wrong, sorry, your explanation makes sense, sorry for the
noise.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html