| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 1 Sep 2014 14:54:57 +0200
From: Arend van Spriel <arend@...adcom.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
CC: Brett Rudley <brudley@...adcom.com>,
"John W. Linville" <linville@...driver.com>,
"David S. Miller" <davem@...emloft.net>,
linux-wireless <linux-wireless@...r.kernel.org>,
<brcm80211-dev-list@...adcom.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] brcmfmac: BRCMFMAC should depend on HAS_DMA
On 09/01/14 10:44, Geert Uytterhoeven wrote:
> Hi Arend,
>
> On Mon, Sep 1, 2014 at 10:21 AM, Arend van Spriel<arend@...adcom.com> wrote:
>>> config BRCMFMAC
>>> tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
>>> - depends on CFG80211
>>> + depends on CFG80211A&& HAS_DMA
>>
>> Not sure what happened here, but CFG80211 kconfig option did was not renamed
>> as far as I know. Anyway, I would like to propose a different solution. Will
>
> Oops, that was me typing the vim append-command twice :-(
> Thanks for noticing!
>
>> get back to you when I have it ready.
>
> OK. Thanks again!
Hi Geert,
I added Kconfig options for the proto layer which are selected by the
host interface selection. So the HAS_DMA dependency is checked for
BRCMFMAC_PCIE. I am wondering whether GENERIC_IO should also be checked.
Can you verify the patch below works with your configuration?
Regards,
Arend
---
diff --git a/drivers/net/wireless/brcm80211/Kconfig
b/drivers/net/wireless/brcm80211/Kconfig
index b8e2561..fe3dc12 100644
--- a/drivers/net/wireless/brcm80211/Kconfig
+++ b/drivers/net/wireless/brcm80211/Kconfig
@@ -27,10 +27,17 @@ config BRCMFMAC
one of the bus interface support. If you choose to build a module,
it'll be called brcmfmac.ko.
+config BRCMFMAC_PROTO_BCDC
+ bool
+
+config BRCMFMAC_PROTO_MSGBUF
+ bool
+
config BRCMFMAC_SDIO
bool "SDIO bus interface support for FullMAC driver"
depends on (MMC = y || MMC = BRCMFMAC)
depends on BRCMFMAC
+ select BRCMFMAC_PROTO_BCDC
select FW_LOADER
default y
---help---
@@ -42,6 +49,7 @@ config BRCMFMAC_USB
bool "USB bus interface support for FullMAC driver"
depends on (USB = y || USB = BRCMFMAC)
depends on BRCMFMAC
+ select BRCMFMAC_PROTO_BCDC
select FW_LOADER
---help---
This option enables the USB bus interface support for Broadcom
@@ -52,6 +60,8 @@ config BRCMFMAC_PCIE
bool "PCIE bus interface support for FullMAC driver"
depends on BRCMFMAC
depends on PCI
+ depends on HAS_DMA
+ select BRCMFMAC_PROTO_MSGBUF
select FW_LOADER
---help---
This option enables the PCIE bus interface support for Broadcom
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile
b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
index c35adf4..90a977f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
@@ -30,16 +30,18 @@ brcmfmac-objs += \
fwsignal.o \
p2p.o \
proto.o \
- bcdc.o \
- commonring.o \
- flowring.o \
- msgbuf.o \
dhd_common.o \
dhd_linux.o \
firmware.o \
feature.o \
btcoex.o \
vendor.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_BCDC) += \
+ bcdc.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_MSGBUF) += \
+ commonring.o \
+ flowring.o \
+ msgbuf.o
brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
dhd_sdio.o \
bcmsdh.o
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
index 17e8c03..6003179 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
@@ -16,9 +16,12 @@
#ifndef BRCMFMAC_BCDC_H
#define BRCMFMAC_BCDC_H
-
+#ifdef CONFIG_BRCMFMAC_PROTO_BCDC
int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
-
+#else
+static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) {
return 0; }
+static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+#endif
#endif /* BRCMFMAC_BCDC_H */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
index f901ae5..e6395ee 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
@@ -32,9 +32,16 @@
int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
+#ifdef CONFIG_BRCMFMAC_PROTO_MSGBUF
int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr);
void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr);
-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
-
+#else
+static inline int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
+{
+ return 0;
+}
+static inline void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr) {}
+#endif
#endif /* BRCMFMAC_MSGBUF_H */
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists