| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CALnjE+qwbQ=5wsLddvZX95xE2_U=osuDg8S10zKWarMD9mp4Aw@mail.gmail.com>
Date: Thu, 4 Sep 2014 13:46:28 -0700
From: Pravin Shelar <pshelar@...ira.com>
To: Jiri Pirko <jiri@...nulli.us>
Cc: netdev <netdev@...r.kernel.org>,
David Miller <davem@...emloft.net>,
nhorman <nhorman@...driver.com>,
Andy Gospodarek <andy@...yhouse.net>,
Thomas Graf <tgraf@...g.ch>,
Daniel Borkmann <dborkman@...hat.com>,
Or Gerlitz <ogerlitz@...lanox.com>,
Jesse Gross <jesse@...ira.com>, Andy Zhou <azhou@...ira.com>,
Ben Hutchings <ben@...adent.org.uk>,
Stephen Hemminger <stephen@...workplumber.org>,
"jeffrey.t.kirsher" <jeffrey.t.kirsher@...el.com>,
vyasevic <vyasevic@...hat.com>,
Cong Wang <xiyou.wangcong@...il.com>,
"john.r.fastabend" <john.r.fastabend@...el.com>,
Eric Dumazet <edumazet@...gle.com>,
Jamal Hadi Salim <jhs@...atatu.com>,
sfeldma <sfeldma@...ulusnetworks.com>,
Florian Fainelli <f.fainelli@...il.com>,
roopa <roopa@...ulusnetworks.com>,
John Linville <linville@...driver.com>,
"dev@...nvswitch.org" <dev@...nvswitch.org>,
jasowang <jasowang@...hat.com>, ebiederm <ebiederm@...ssion.com>,
Nicolas Dichtel <nicolas.dichtel@...nd.com>,
"ryazanov.s.a" <ryazanov.s.a@...il.com>,
buytenh <buytenh@...tstofly.org>, aviadr <aviadr@...lanox.com>,
nbd <nbd@...nwrt.org>,
Alexei Starovoitov <alexei.starovoitov@...il.com>,
Neil Jerram <Neil.Jerram@...aswitch.com>,
Rony Efraim <ronye@...lanox.com>
Subject: Re: [patch net-next 01/13] openvswitch: split flow structures into
ovs specific and generic ones
On Thu, Sep 4, 2014 at 5:33 AM, Jiri Pirko <jiri@...nulli.us> wrote:
> Wed, Sep 03, 2014 at 08:41:39PM CEST, pshelar@...ira.com wrote:
>>On Wed, Sep 3, 2014 at 2:24 AM, Jiri Pirko <jiri@...nulli.us> wrote:
>>> After this, flow related structures can be used in other code.
>>>
>>> Signed-off-by: Jiri Pirko <jiri@...nulli.us>
>>> ---
>>> include/net/sw_flow.h | 99 ++++++++++++++++++++++++++++++++++
>>> net/openvswitch/actions.c | 3 +-
>>> net/openvswitch/datapath.c | 74 +++++++++++++-------------
>>> net/openvswitch/datapath.h | 4 +-
>>> net/openvswitch/flow.c | 6 +--
>>> net/openvswitch/flow.h | 102 +++++++----------------------------
>>> net/openvswitch/flow_netlink.c | 53 +++++++++---------
>>> net/openvswitch/flow_netlink.h | 10 ++--
>>> net/openvswitch/flow_table.c | 118 ++++++++++++++++++++++-------------------
>>> net/openvswitch/flow_table.h | 30 +++++------
>>> net/openvswitch/vport-gre.c | 4 +-
>>> net/openvswitch/vport-vxlan.c | 2 +-
>>> net/openvswitch/vport.c | 2 +-
>>> net/openvswitch/vport.h | 2 +-
>>> 14 files changed, 276 insertions(+), 233 deletions(-)
>>> create mode 100644 include/net/sw_flow.h
>>>
>>> diff --git a/include/net/sw_flow.h b/include/net/sw_flow.h
>>> new file mode 100644
>>> index 0000000..21724f1
>>> --- /dev/null
>>> +++ b/include/net/sw_flow.h
>>> @@ -0,0 +1,99 @@
>>> +/*
>>> + * include/net/sw_flow.h - Generic switch flow structures
>>> + * Copyright (c) 2007-2012 Nicira, Inc.
>>> + * Copyright (c) 2014 Jiri Pirko <jiri@...nulli.us>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + */
>>> +
>>> +#ifndef _NET_SW_FLOW_H_
>>> +#define _NET_SW_FLOW_H_
>>> +
>>> +struct sw_flow_key_ipv4_tunnel {
>>> + __be64 tun_id;
>>> + __be32 ipv4_src;
>>> + __be32 ipv4_dst;
>>> + __be16 tun_flags;
>>> + u8 ipv4_tos;
>>> + u8 ipv4_ttl;
>>> +};
>>> +
>>> +struct sw_flow_key {
>>> + struct sw_flow_key_ipv4_tunnel tun_key; /* Encapsulating tunnel key. */
>>> + struct {
>>> + u32 priority; /* Packet QoS priority. */
>>> + u32 skb_mark; /* SKB mark. */
>>> + u16 in_port; /* Input switch port (or DP_MAX_PORTS). */
>>> + } __packed phy; /* Safe when right after 'tun_key'. */
>>> + struct {
>>> + u8 src[ETH_ALEN]; /* Ethernet source address. */
>>> + u8 dst[ETH_ALEN]; /* Ethernet destination address. */
>>> + __be16 tci; /* 0 if no VLAN, VLAN_TAG_PRESENT set otherwise. */
>>> + __be16 type; /* Ethernet frame type. */
>>> + } eth;
>>> + struct {
>>> + u8 proto; /* IP protocol or lower 8 bits of ARP opcode. */
>>> + u8 tos; /* IP ToS. */
>>> + u8 ttl; /* IP TTL/hop limit. */
>>> + u8 frag; /* One of OVS_FRAG_TYPE_*. */
>>> + } ip;
>>> + struct {
>>> + __be16 src; /* TCP/UDP/SCTP source port. */
>>> + __be16 dst; /* TCP/UDP/SCTP destination port. */
>>> + __be16 flags; /* TCP flags. */
>>> + } tp;
>>> + union {
>>> + struct {
>>> + struct {
>>> + __be32 src; /* IP source address. */
>>> + __be32 dst; /* IP destination address. */
>>> + } addr;
>>> + struct {
>>> + u8 sha[ETH_ALEN]; /* ARP source hardware address. */
>>> + u8 tha[ETH_ALEN]; /* ARP target hardware address. */
>>> + } arp;
>>> + } ipv4;
>>> + struct {
>>> + struct {
>>> + struct in6_addr src; /* IPv6 source address. */
>>> + struct in6_addr dst; /* IPv6 destination address. */
>>> + } addr;
>>> + __be32 label; /* IPv6 flow label. */
>>> + struct {
>>> + struct in6_addr target; /* ND target address. */
>>> + u8 sll[ETH_ALEN]; /* ND source link layer address. */
>>> + u8 tll[ETH_ALEN]; /* ND target link layer address. */
>>> + } nd;
>>> + } ipv6;
>>> + };
>>> +} __aligned(BITS_PER_LONG/8); /* Ensure that we can do comparisons as longs. */
>>> +
>>
>>HW offload API should be separate from OVS module. This has following
>>advantages.
>>1. It can be managed by OVS userspace vswitchd process which has much
>>better context to setup hardware flow table. Once we add capabilities
>>for swdev, it is much more easier for vswitchd process to choose
>>correct (hw or sw) flow table for given flow.
>
> The idea is to add a nl attr in ovs genl iface so the vswitchd can
> speficify the flow the to be in sw only, in hw only, in both.
> I believe that is is more convenient to let switchd to communicate flows
> via single iface.
>
How is it convenient? this patch complicates OVS kernel module. It add
OVS interfaces for HW offload. And you need similar interfaces for
switchdev device. So it duplicate code.
On the other hand if vswitchd uses common interface (switchdev) there
is no need to extend ovs kernel interface. For example specifying
extra metadata, like (sw only, hw olny, both).
>>2. Other application that wants to use HW offload does not have
>>dependency on OVS kernel module.
>
> That is not the case for this patchset. Userspace can insert/remove
> flows using the switchdev generic netlink api - see:
> [patch net-next 13/13] switchdev: introduce Netlink API
>
>>3. Hardware and software datapath remains separate, these two
>>components has no dependency on each other, both can be developed
>>independent of each other.
>
>
> The general idea is to have the offloads handled in-kernel. Therefore I
> hooked on to ovs kernel dp code.
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists