| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <54086645.3010102@redhat.com>
Date: Thu, 04 Sep 2014 15:16:53 +0200
From: Nikolay Aleksandrov <nikolay@...hat.com>
To: Mahesh Bandewar <maheshb@...gle.com>,
Jay Vosburgh <j.vosburgh@...il.com>,
Veaceslav Falico <vfalico@...hat.com>,
Andy Gospodarek <andy@...yhouse.net>,
David Miller <davem@...emloft.net>
CC: netdev <netdev@...r.kernel.org>,
Eric Dumazet <edumazet@...gle.com>,
Maciej Zenczykowski <maze@...gle.com>
Subject: Re: [PATCH net-next 2/2] bonding: Simplify the xmit function for
modes that use xmit_hash
On 03/09/14 23:47, Mahesh Bandewar wrote:
> Earlier change to use usable slave array for TLB mode had an additional
> performance advantage. So extending the same logic to all other modes
> that use xmit-hash for slave selection (viz 802.3AD, and XOR modes).
> Also consolidating this with the earlier TLB change.
>
> The main idea is to build the usable slaves array in the control path
> and use that array for slave selection during xmit operation.
>
> Measured performance in a setup with a bond of 4x1G NICs with 200
> instances of netperf for the modes involved (3ad, xor, tlb)
> cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5
>
> Mode TPS-Before TPS-After
>
> 802.3ad : 468,694 493,101
> TLB (lb=0): 392,583 392,965
> XOR : 475,696 484,517
>
> Signed-off-by: Mahesh Bandewar <maheshb@...gle.com>
> ---
<<snip>>
Hi Mahesh,
I really like this idea, but I think this patch is far from ready and needs more
thorough examination.
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index f0f5eab0fab1..b0e8e7cfa10f 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
What happens to modes that don't have miimon enabled i.e. if I do: modprobe
bonding mode=2 and enslave something then the slave array will never get created
and I won't be able to xmit anything ever because miimon is 0 by default and
even if it wasn't I'll have to wait for it to create the slave array before I
can do any transmissions.
By the way, I just noticed that arp_interval is actually supported in XOR mode.
> @@ -1693,6 +1693,9 @@ static int __bond_release_one(struct net_device *bond_dev,
> if (BOND_MODE(bond) == BOND_MODE_8023AD)
> bond_3ad_unbind_slave(slave);
>
^^^^^^^^^^^^^^^^^^^^^^^
Empty line.
> + else if (BOND_MODE(bond) == BOND_MODE_XOR)
> + bond_update_slave_arr(bond, slave);
> +
> write_unlock_bh(&bond->lock);
>
> netdev_info(bond_dev, "Releasing %s interface %s\n",
> @@ -2009,6 +2012,9 @@ static void bond_miimon_commit(struct bonding *bond)
> bond_alb_handle_link_change(bond, slave,
> BOND_LINK_UP);
>
> + if (BOND_MODE(bond) == BOND_MODE_XOR)
> + bond_update_slave_arr(bond, NULL);
> +
> if (!bond->curr_active_slave ||
> (slave == bond->primary_slave))
> goto do_failover;
> @@ -2037,6 +2043,9 @@ static void bond_miimon_commit(struct bonding *bond)
> bond_alb_handle_link_change(bond, slave,
> BOND_LINK_DOWN);
>
> + if (BOND_MODE(bond) == BOND_MODE_XOR)
> + bond_update_slave_arr(bond, slave);
> +
> if (slave == rcu_access_pointer(bond->curr_active_slave))
> goto do_failover;
>
> @@ -3149,6 +3158,7 @@ static int bond_open(struct net_device *bond_dev)
> static int bond_close(struct net_device *bond_dev)
> {
> struct bonding *bond = netdev_priv(bond_dev);
> + struct bond_up_slave *arr;
>
> bond_work_cancel_all(bond);
> bond->send_peer_notif = 0;
> @@ -3156,6 +3166,10 @@ static int bond_close(struct net_device *bond_dev)
> bond_alb_deinitialize(bond);
> bond->recv_probe = NULL;
>
> + arr = rtnl_dereference(bond->slave_arr);
> + if (arr)
> + kfree_rcu(arr, rcu);
> +
^^^^^^^^^^^^^^
Bond close is dealt with, but what happens after: ip l set bond down, ip l set
bond up
or alternatively: ip l set bond down, echo -slave > slaves
The array is freed but slave_arr still points to it.
> return 0;
> }
>
> @@ -3684,15 +3698,84 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
> return NETDEV_TX_OK;
> }
>
> -/* In bond_xmit_xor() , we determine the output device by using a pre-
> - * determined xmit_hash_policy(), If the selected device is not enabled,
> - * find the next active slave.
> +/* Build the usable slaves array in control path for modes that use xmit-hash
> + * to determine the slave interface -
> + * (a) BOND_MODE_8023AD
> + * (b) BOND_MODE_XOR
> + * (c) BOND_MODE_TLB && tlb_dynamic_lb == 0
> */
> -static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
> +int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave)
^^^^^^^^^^^^^^^^^^^^^^^^^^
In general any failing in this function means that the old array stays with the
old slave list. I think that you really should revisit the places that use this
after the patch and see if that won't cause any problems.
> {
> - struct bonding *bond = netdev_priv(bond_dev);
> + struct slave *slave;
> + struct list_head *iter;
> + struct bond_up_slave *new_arr, *old_arr;
> + int slaves_in_agg;
> + int agg_id = 0;
> + int ret = 0;
> +
> + new_arr = kzalloc(offsetof(struct bond_up_slave, arr[bond->slave_cnt]),
> + GFP_ATOMIC);
> + if (!new_arr) {
> + ret = -ENOMEM;
> + goto out;
> + }
> + if (BOND_MODE(bond) == BOND_MODE_8023AD) {
> + struct ad_info ad_info;
> +
> + if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Called with RCU otherwise sparse won't be happy. Perhaps
bond_3ad_get_active_agg_info() ?
> + pr_debug("__bond_3ad_get_active_agg_info failed\n");
> + kfree_rcu(new_arr, rcu);
> + ret = -EINVAL;
> + goto out;
> + }
> + slaves_in_agg = ad_info.ports;
> + agg_id = ad_info.aggregator_id;
> + }
> + bond_for_each_slave(bond, slave, iter) {
> + if (BOND_MODE(bond) == BOND_MODE_8023AD) {
> + struct aggregator *agg;
> +
> + agg = SLAVE_AD_INFO(slave)->port.aggregator;
> + if (!agg || agg->aggregator_identifier != agg_id)
> + continue;
> + }
> + if (!bond_slave_can_tx(slave))
> + continue;
> + if (skipslave == slave)
> + continue;
> + new_arr->arr[new_arr->count++] = slave;
> + }
>
> - bond_xmit_slave_id(bond, skb, bond_xmit_hash(bond, skb) % bond->slave_cnt);
> + old_arr = rcu_dereference_protected(bond->slave_arr,
> + lockdep_rtnl_is_held() ||
> + lockdep_is_held(&bond->lock) ||
> + lockdep_is_held(&bond->curr_slave_lock));
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This line is the most troublesome for me, which lock is it ? Does this mean that
whichever I hold from the three I can update the slave array ?
I don't think this is worked out well, you should explicitly specify how and why
it is safe to update this under each of the locks and maybe you'll be able to
reduce the lock list :-)
> + rcu_assign_pointer(bond->slave_arr, new_arr);
> + if (old_arr)
> + kfree_rcu(old_arr, rcu);
> +
> +out:
> + return ret;
> +}
> +
> +/* Use this Xmit function for 3AD as well as XOR modes. The current
> + * usable slave array is formed in the control path. The xmit function
> + * just calculates hash and sends the packet out.
> + */
> +int bond_3ad_xor_xmit(struct sk_buff *skb, struct net_device *dev)
> +{
> + struct bonding *bond = netdev_priv(dev);
> + struct slave *slave;
> + struct bond_up_slave *slaves;
> +
> + slaves = rcu_dereference(bond->slave_arr);
> + if (slaves && slaves->count) {
> + slave = slaves->arr[bond_xmit_hash(bond, skb) % slaves->count];
> + bond_dev_queue_xmit(bond, skb, slave->dev);
> + } else {
> + dev_kfree_skb_any(skb);
> + atomic_long_inc(&dev->tx_dropped);
> + }
>
> return NETDEV_TX_OK;
> }
> @@ -3794,12 +3877,11 @@ static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev
> return bond_xmit_roundrobin(skb, dev);
> case BOND_MODE_ACTIVEBACKUP:
> return bond_xmit_activebackup(skb, dev);
> + case BOND_MODE_8023AD:
> case BOND_MODE_XOR:
> - return bond_xmit_xor(skb, dev);
> + return bond_3ad_xor_xmit(skb, dev);
> case BOND_MODE_BROADCAST:
> return bond_xmit_broadcast(skb, dev);
> - case BOND_MODE_8023AD:
> - return bond_3ad_xmit_xor(skb, dev);
> case BOND_MODE_ALB:
> return bond_alb_xmit(skb, dev);
> case BOND_MODE_TLB:
> diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
> index aace510d08d1..4a6195c0de60 100644
> --- a/drivers/net/bonding/bonding.h
> +++ b/drivers/net/bonding/bonding.h
> @@ -177,6 +177,12 @@ struct slave {
> struct kobject kobj;
> };
>
> +struct bond_up_slave {
> + unsigned int count;
> + struct rcu_head rcu;
> + struct slave *arr[0];
> +};
> +
> /*
> * Link pseudo-state only used internally by monitors
> */
> @@ -196,6 +202,7 @@ struct bonding {
> struct slave __rcu *curr_active_slave;
> struct slave __rcu *current_arp_slave;
> struct slave *primary_slave;
> + struct bond_up_slave __rcu *slave_arr; /* Array of usable slaves */
> bool force_primary;
> s32 slave_cnt; /* never change this value outside the attach/detach wrappers */
> int (*recv_probe)(const struct sk_buff *, struct bonding *,
> @@ -527,6 +534,7 @@ const char *bond_slave_link_status(s8 link);
> struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev,
> struct net_device *end_dev,
> int level);
> +int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave);
>
> #ifdef CONFIG_PROC_FS
> void bond_create_proc_entry(struct bonding *bond);
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists