netdev - [PATCH 03/13] net: can: c_can: Add support for START pulse in RAMINIT sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1410185442-907-4-git-send-email-rogerq@ti.com>
Date:	Mon, 8 Sep 2014 17:10:32 +0300
From:	Roger Quadros <rogerq@...com>
To:	<wg@...ndegger.com>, <mkl@...gutronix.de>, <tony@...mide.com>
CC:	<tglx@...utronix.de>, <linux-omap@...r.kernel.org>,
	<linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
	<mugunthanvnm@...com>, <george.cherian@...com>, <balbi@...com>,
	<nsekhar@...com>, <nm@...com>, Roger Quadros <rogerq@...com>
Subject: [PATCH 03/13] net: can: c_can: Add support for START pulse in RAMINIT sequence

Some SoCs e.g. (TI DRA7xx) need a START pulse to start the
RAMINIT sequence i.e. START bit must be set and cleared before
checking for the DONE bit status. Add a new DT property "raminit-pulse"
to specify if this mechanism must be used for RAMINIT.

Signed-off-by: Roger Quadros <rogerq@...com>
---
 Documentation/devicetree/bindings/net/can/c_can.txt | 3 +++
 drivers/net/can/c_can/c_can.h                       | 1 +
 drivers/net/can/c_can/c_can_platform.c              | 8 ++++++++
 3 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
index 0856209..2f0a6bb 100644
--- a/Documentation/devicetree/bindings/net/can/c_can.txt
+++ b/Documentation/devicetree/bindings/net/can/c_can.txt
@@ -19,6 +19,9 @@ Optional properties:
 			  register within the syscon region
 - raminit-start-bit	: Bit posistion of START bit in the RAMINIT register
 - raminit-done-bit	: Bit position of DONE bit in the RAMINIT register
+- raminit-pulse		: Property must exist if START pulse is needed for RAMINIT
+			  sequence i.e. START bit will be set and cleared before
+			  checking for DONE bit.
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index bf68822..85b5ad0 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -175,6 +175,7 @@ struct c_can_raminit {
 	unsigned int reg;	/* register index within syscon */
 	u8 start_bit;	/* START bit position in raminit reg. */
 	u8 done_bit;	/* DONE bit position in raminit reg. */
+	bool needs_pulse;	/* If set, sets and clears START bit (pulse) */
 };
 
 /* c_can private data structure */
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index e7ec3b6..bc09695 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -123,6 +123,12 @@ static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
 		ctrl |= 1 << raminit->start_bit;
 		regmap_write(raminit->syscon, raminit->reg, ctrl);
 
+		/* clear START bit if start pulse is needed */
+		if (raminit->needs_pulse) {
+			ctrl &= ~(1 << raminit->start_bit);
+			regmap_write(raminit->syscon, raminit->reg, ctrl);
+		}
+
 		ctrl |= 1 << raminit->done_bit;
 		c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
 	}
@@ -343,6 +349,8 @@ static int c_can_plat_probe(struct platform_device *pdev)
 		}
 
 		priv->raminit_sys.done_bit = val;
+		priv->raminit_sys.needs_pulse = of_property_read_bool(np,
+								      "raminit-pulse");
 		priv->raminit = c_can_hw_raminit_syscon;
 		break;
 	default:
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html