lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1410890290-11248-5-git-send-email-Frank.Li@freescale.com>
Date:	Wed, 17 Sep 2014 01:58:10 +0800
From:	<Frank.Li@...escale.com>
To:	<b38611@...escale.com>, <davem@...emloft.net>,
	<netdev@...r.kernel.org>, <lznuaa@...il.com>
CC:	<shawn.guo@...aro.org>, <linux-arm-kernel@...ts.infradead.org>,
	"Fugang Duan" <B38611@...escale.com>,
	Frank Li <Frank.Li@...escale.com>
Subject: [Patch net-next v2 4/4] net: fec: Workaround for imx6sx enet tx hang when enable three queues

From: Fugang Duan <B38611@...escale.com>

When enable three queues on imx6sx enet, and then do tx performance
test with iperf tool, after some time running, tx hang.

Found that:
	If uDMA is running, software set TDAR may cause tx hang.
	If uDMA is in idle, software set TDAR don't cause tx hang.

There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
The issue exist at i.MX6SX enet IP.

So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.

The patch is only one Workaround for the issue TKT210582.

Signed-off-by: Fugang Duan <B38611@...escale.com>
Signed-off-by: Frank Li <Frank.Li@...escale.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 3a735ef..cc8c934 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -111,6 +111,12 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
  *   independent rings
  */
 #define FEC_QUIRK_HAS_AVB		(1 << 8)
+/* There is a TDAR race condition for mutliQ when the software sets TDAR
+ * and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
+ * This will cause the udma_tx and udma_tx_arbiter state machines to hang.
+ * The issue exist at i.MX6SX enet IP.
+ */
+#define FEC_QUIRK_ERR007885		(1 << 9)
 
 static struct platform_device_id fec_devtype[] = {
 	{
@@ -139,7 +145,7 @@ static struct platform_device_id fec_devtype[] = {
 		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
 				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
-				FEC_QUIRK_HAS_AVB,
+				FEC_QUIRK_HAS_AVB | FEC_QUIRK_ERR007885,
 	}, {
 		/* sentinel */
 	}
@@ -709,6 +715,8 @@ static int fec_enet_txq_submit_tso(struct fec_enet_priv_tx_q *txq,
 	struct tso_t tso;
 	unsigned int index = 0;
 	int ret;
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 
 	if (tso_count_descs(skb) >= fec_enet_get_free_txdesc_num(fep, txq)) {
 		dev_kfree_skb_any(skb);
@@ -770,7 +778,12 @@ static int fec_enet_txq_submit_tso(struct fec_enet_priv_tx_q *txq,
 	txq->cur_tx = bdp;
 
 	/* Trigger transmission start */
-	writel(0, fep->hwp + FEC_X_DES_ACTIVE(queue));
+	if (!(id_entry->driver_data & FEC_QUIRK_ERR007885) ||
+	    !readl(fep->hwp + FEC_X_DES_ACTIVE(queue)) ||
+	    !readl(fep->hwp + FEC_X_DES_ACTIVE(queue)) ||
+	    !readl(fep->hwp + FEC_X_DES_ACTIVE(queue)) ||
+	    !readl(fep->hwp + FEC_X_DES_ACTIVE(queue)))
+		writel(0, fep->hwp + FEC_X_DES_ACTIVE(queue));
 
 	return 0;
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ