[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <F54AEECA5E2B9541821D670476DAE19C2B7EAF23@PGSMSX102.gar.corp.intel.com>
Date: Tue, 23 Sep 2014 07:03:46 +0000
From: "Kweh, Hock Leong" <hock.leong.kweh@...el.com>
To: Giuseppe CAVALLARO <peppe.cavallaro@...com>,
David Miller <davem@...emloft.net>
CC: "rayagond@...avyalabs.com" <rayagond@...avyalabs.com>,
"vbridgers2013@...il.com" <vbridgers2013@...il.com>,
"wens@...e.org" <wens@...e.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Ong, Boon Leong" <boon.leong.ong@...el.com>,
"tobias.johannes.klausmann@....thm.de"
<tobias.johannes.klausmann@....thm.de>
Subject: RE: [PATCH] net: stmmac: fix stmmac_pci_probe failed when
CONFIG_HAVE_CLK is selected
> -----Original Message-----
> From: Giuseppe CAVALLARO [mailto:peppe.cavallaro@...com]
> Sent: Tuesday, September 23, 2014 2:10 PM
>
> the logic is: the priv->stmmac_clk must be always provided from the platform
> then we have two cases:
>
> 1) if priv->plat->clk_csr is also passed then it will be adopt in the
> mdio functions to program the Reg4[5:2]
> This was required in the past IIRC on SPEAr platforms.
>
> 2) if priv->plat->clk_csr is not passed from the platform then the
> priv->clk_csr will be set according to the priv->stmmac_clk
> and always used in the mdio part.
>
> So IIUC now you are asking for not passing the priv->stmmac_clk and warning
> this event w/o failing. Why you cannot pass this clock?
>
> peppe
Hi peppe,
Appreciate for the explanation. Just to clarify that I am not asking not to pass in the priv->stmmac_clk.
In fact, the fix will fail at case 2 if driver cannot obtain the priv->stmmac_clk, but just not the case 1.
For case 1, seem like it does not require the stmmac_clk then I think it should be OK not to fail it when
driver did not get stmmac_clk but have the clk_csr set.
Anyway, I can change the fix by adding the clock registration APIs being call at the stmmac_pci.c probe there before
calling stmmac_dvr_probe. By doing this, it created a dependency to the pci driver that must have CONFIG_HAVE_CLK
to be turned on. Besides, I would need you guys to provide me information on other platforms about what is the best
value to set? Can I just set to zero since the stmmac_pci driver is always using the priv->plat->clk_csr?
Regards,
Wilson
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists