[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGXr9JF=PuuE9-AYDsoNeAuAWa8=DDMPLHNqDiTODg3LFNxOdg@mail.gmail.com>
Date: Wed, 1 Oct 2014 11:44:54 -0700
From: Petri Gynther <pgynther@...gle.com>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: netdev@...r.kernel.org, David Miller <davem@...emloft.net>
Subject: Re: [PATCH net-next] net: phy: add BCM7425 and BCM7429 PHYs
Hi Florian,
On Wed, Oct 1, 2014 at 11:34 AM, Florian Fainelli <f.fainelli@...il.com> wrote:
> Hello Petri,
>
> This looks good to me, some minor comments below
>
> On 10/01/2014 11:31 AM, Petri Gynther wrote:
>> Signed-off-by: Petri Gynther <pgynther@...gle.com>
>> ---
>> drivers/net/phy/bcm7xxx.c | 28 ++++++++++++++++++++++++++++
>> include/linux/brcmphy.h | 2 ++
>> 2 files changed, 30 insertions(+)
>>
>> diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
>> index daae699..0ae90f1 100644
>> --- a/drivers/net/phy/bcm7xxx.c
>> +++ b/drivers/net/phy/bcm7xxx.c
>> @@ -350,6 +350,32 @@ static struct phy_driver bcm7xxx_driver[] = {
>> BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
>> BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
>> {
>> + .phy_id = PHY_ID_BCM7425,
>> + .phy_id_mask = 0xffffffff,
>
> The last 4 bits contain the revision, although we never increased it, it
> is safer to match with 0xffff_fff0. If that means dropping the catch all
> 40nm entry, that's fine by me.
>
OK. Will fix.
>> + .name = "Broadcom BCM7425 External PHY",
>
> Just use "Broadcom BCM7425" here, for consistency with the other
> entries, and since that's really the internal PHY of the chip.
>
OK.
>> + .features = PHY_GBIT_FEATURES |
>> + SUPPORTED_Pause | SUPPORTED_Asym_Pause,
>> + .flags = 0,
>> + .config_init = bcm7xxx_config_init,
>> + .config_aneg = genphy_config_aneg,
>> + .read_status = genphy_read_status,
>> + .suspend = bcm7xxx_suspend,
>> + .resume = bcm7xxx_config_init,
>> + .driver = { .owner = THIS_MODULE },
>> +}, {
>> + .phy_id = PHY_ID_BCM7429,
>> + .phy_id_mask = 0xffffffff,
>> + .name = "Broadcom BCM7429 Internal PHY",
>
> Same thing here.
>
OK.
>> + .features = PHY_GBIT_FEATURES |
>> + SUPPORTED_Pause | SUPPORTED_Asym_Pause,
>> + .flags = PHY_IS_INTERNAL,
>> + .config_init = bcm7xxx_config_init,
>> + .config_aneg = genphy_config_aneg,
>> + .read_status = genphy_read_status,
>> + .suspend = bcm7xxx_suspend,
>> + .resume = bcm7xxx_config_init,
>> + .driver = { .owner = THIS_MODULE },
>> +}, {
>> .phy_id = PHY_BCM_OUI_4,
>> .phy_id_mask = 0xffff0000,
>> .name = "Broadcom BCM7XXX 40nm",
>> @@ -381,6 +407,8 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
>> { PHY_ID_BCM7250, 0xfffffff0, },
>> { PHY_ID_BCM7364, 0xfffffff0, },
>> { PHY_ID_BCM7366, 0xfffffff0, },
>> + { PHY_ID_BCM7425, 0xffffffff, },
>> + { PHY_ID_BCM7429, 0xffffffff, },
I need to adjust these masks as well.
>> { PHY_ID_BCM7439, 0xfffffff0, },
>> { PHY_ID_BCM7445, 0xfffffff0, },
>> { PHY_BCM_OUI_4, 0xffff0000 },
>> diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
>> index 3f626fe..666132e 100644
>> --- a/include/linux/brcmphy.h
>> +++ b/include/linux/brcmphy.h
>> @@ -16,6 +16,8 @@
>> #define PHY_ID_BCM7250 0xae025280
>> #define PHY_ID_BCM7364 0xae025260
>> #define PHY_ID_BCM7366 0x600d8490
>> +#define PHY_ID_BCM7425 0x03625e69
This should then be 0x03625e60, right?
>> +#define PHY_ID_BCM7429 0x600d8731
And this 0x600d8730?
>> #define PHY_ID_BCM7439 0x600d8480
>> #define PHY_ID_BCM7445 0x600d8510
>>
>>
>
-- Petri
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists