Message-ID: <542BED4F.9070900@intel.com>
Date:	Wed, 01 Oct 2014 05:02:23 -0700
From:	Alexander Duyck <alexander.h.duyck@...el.com>
To:	Or Gerlitz <gerlitz.or@...il.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
CC:	David Miller <davem@...emloft.net>,
	Linux Netdev List <netdev@...r.kernel.org>,
	nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
	Tom Herbert <therbert@...gle.com>
Subject: Re: [net-next v3 20/29] fm10k: Add support for netdev offloads

On 10/01/2014 01:31 AM, Or Gerlitz wrote:
> On Tue, Sep 23, 2014 at 2:16 PM, Jeff Kirsher
> <jeffrey.t.kirsher@...el.com> wrote:
>> From: Alexander Duyck <alexander.h.duyck@...el.com>
>> This patch adds support for basic offloads including TSO, Tx checksum, Rx
>> checksum, Rx hash, and the same features applied to VXLAN/NVGRE tunnels.
> 
>> --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
>> +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
> [...]
>> +#define VXLAN_HLEN (sizeof(struct udphdr) + 8)
>> +static struct ethhdr *fm10k_port_is_vxlan(struct sk_buff *skb)
>> +{
>> +       struct fm10k_intfc *interface = netdev_priv(skb->dev);
>> +       struct fm10k_vxlan_port *vxlan_port;
>> +
>> +       /* we can only offload a vxlan if we recognize it as such */
>> +       vxlan_port = list_first_entry_or_null(&interface->vxlan_port,
>> +                                             struct fm10k_vxlan_port, list);
>> +
>> +       if (!vxlan_port)
>> +               return NULL;
>> +       if (vxlan_port->port != udp_hdr(skb)->dest)
>> +               return NULL;
>> +
>> +       /* return offset of udp_hdr plus 8 bytes for VXLAN header */
>> +       return (struct ethhdr *)(skb_transport_header(skb) + VXLAN_HLEN);
>> +}
>> +
>> +#define FM10K_NVGRE_RESERVED0_FLAGS htons(0x9FFF)
>> +#define NVGRE_TNI htons(0x2000)
>> +struct fm10k_nvgre_hdr {
>> +       __be16 flags;
>> +       __be16 proto;
>> +       __be32 tni;
>> +};
>> +
>> +static struct ethhdr *fm10k_gre_is_nvgre(struct sk_buff *skb)
>> +{
>> +       struct fm10k_nvgre_hdr *nvgre_hdr;
>> +       int hlen = ip_hdrlen(skb);
>> +
>> +       /* currently only IPv4 is supported due to hlen above */
>> +       if (vlan_get_protocol(skb) != htons(ETH_P_IP))
>> +               return NULL;
>> +
>> +       /* our transport header should be NVGRE */
>> +       nvgre_hdr = (struct fm10k_nvgre_hdr *)(skb_network_header(skb) + hlen);
>> +
>> +       /* verify all reserved flags are 0 */
>> +       if (nvgre_hdr->flags & FM10K_NVGRE_RESERVED0_FLAGS)
>> +               return NULL;
>> +
>> +       /* verify protocol is transparent Ethernet bridging */
>> +       if (nvgre_hdr->proto != htons(ETH_P_TEB))
>> +               return NULL;
>> +
>> +       /* report start of ethernet header */
>> +       if (nvgre_hdr->flags & NVGRE_TNI)
>> +               return (struct ethhdr *)(nvgre_hdr + 1);
>> +
>> +       return (struct ethhdr *)(&nvgre_hdr->tni);
>> +}
> 
> this helper is fully generic, should reside elsewhere in the stack

I will look into that and submit a follow-up patch to pull it out.

>> +static int fm10k_tso(struct fm10k_ring *tx_ring,
>> +                    struct fm10k_tx_buffer *first)
>> +{
>> +       struct sk_buff *skb = first->skb;
>> +       struct fm10k_tx_desc *tx_desc;
>> +       unsigned char *th;
>> +       u8 hdrlen;
>> +
>> +       if (skb->ip_summed != CHECKSUM_PARTIAL)
>> +               return 0;
>> +
>> +       if (!skb_is_gso(skb))
>> +               return 0;
>> +
>> +       /* compute header lengths */
>> +       if (skb->encapsulation) {
>> +               if (!fm10k_tx_encap_offload(skb))
>> +                       goto err_vxlan;
>> +               th = skb_inner_transport_header(skb);
>> +       } else {
>> +               th = skb_transport_header(skb);
>> +       }
>> +
>> +       /* compute offset from SOF to transport header and add header len */
>> +       hdrlen = (th - skb->data) + (((struct tcphdr *)th)->doff << 2);
>> +
>> +       first->tx_flags |= FM10K_TX_FLAGS_CSUM;
>> +
>> +       /* update gso size and bytecount with header size */
>> +       first->gso_segs = skb_shinfo(skb)->gso_segs;
>> +       first->bytecount += (first->gso_segs - 1) * hdrlen;
>> +
>> +       /* populate Tx descriptor header size and mss */
>> +       tx_desc = FM10K_TX_DESC(tx_ring, tx_ring->next_to_use);
>> +       tx_desc->hdrlen = hdrlen;
>> +       tx_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
>> +
>> +       return 1;
>> +err_vxlan:
>> +       tx_ring->netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL;
>> +       if (!net_ratelimit())
>> +               netdev_err(tx_ring->netdev,
>> +                          "TSO requested for unsupported tunnel, disabling offload\n");
>> +       return -1;
>> +}
> 
> why? if TSO was requested for some packet the driver can't do, you disable GSO
> for udp tunnels for any future packets too? maybe just disable it
> permanently  till you
> feel safer to run under the current stack?

That is essentially what I am doing.  If the user wants they can turn
the feature back on via ethtool, but there is no point in having it on
if the device itself cannot support the packets that are coming through.

Thanks,

Alex
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists