[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1412238122-1914-1-git-send-email-m.stam@fugro.nl>
Date: Thu, 2 Oct 2014 10:22:02 +0200
From: Michel Stam <m.stam@...ro.nl>
To: netdev@...r.kernel.org
Cc: freddy@...x.com.tw, grundler@...omium.org,
Michel Stam <m.stam@...ro.nl>
Subject: [PATCH] Don't reset PHY on if_up for ASIX 88772
I've noticed every time the interface is set to 'up,', the kernel
reports that the link speed is set to 100 Mbps/Full Duplex, even
when ethtool is used to set autonegotiation to 'off', half
duplex, 10 Mbps.
It can be tested by:
ifconfig eth0 down
ethtool -s eth0 autoneg off speed 10 duplex half
ifconfig eth0 up
Then checking 'dmesg' for the link speed.
Signed-off-by: Michel Stam <m.stam@...ro.nl>
---
drivers/net/usb/asix_devices.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5d19409..2c05f6c 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -890,7 +890,7 @@ static const struct driver_info ax88772_info = {
.unbind = ax88772_unbind,
.status = asix_status,
.link_reset = ax88772_link_reset,
- .reset = ax88772_reset,
+ .reset = ax88772_link_reset,
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,
--
1.7.12.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists