| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <543E5347.7060106@redhat.com>
Date: Wed, 15 Oct 2014 18:58:15 +0800
From: Jason Wang <jasowang@...hat.com>
To: "Michael S. Tsirkin" <mst@...hat.com>
CC: rusty@...tcorp.com.au, virtualization@...ts.linux-foundation.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
davem@...emloft.net, eric.dumazet@...il.com
Subject: Re: [RFC PATCH net-next 2/6] virtio: introduce virtio_enable_cb_avail()
On 10/15/2014 06:41 PM, Michael S. Tsirkin wrote:
> On Wed, Oct 15, 2014 at 06:19:15PM +0800, Jason Wang wrote:
>> On 10/15/2014 05:28 PM, Michael S. Tsirkin wrote:
>>> On Wed, Oct 15, 2014 at 03:25:26PM +0800, Jason Wang wrote:
>>>> This patch introduces virtio_enable_cb_avail() to publish avail idx
>>>> and used event. This could be used by batched buffer submitting to
>>>> reduce the number of tx interrupts.
>>>>
>>>> Cc: Rusty Russell <rusty@...tcorp.com.au>
>>>> Cc: Michael S. Tsirkin <mst@...hat.com>
>>>> Signed-off-by: Jason Wang <jasowang@...hat.com>
>>>> ---
>>>> drivers/virtio/virtio_ring.c | 22 ++++++++++++++++++++--
>>>> include/linux/virtio.h | 2 ++
>>>> 2 files changed, 22 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
>>>> index 1b3929f..d67fbf8 100644
>>>> --- a/drivers/virtio/virtio_ring.c
>>>> +++ b/drivers/virtio/virtio_ring.c
>>>> @@ -567,14 +567,32 @@ unsigned virtqueue_enable_cb_prepare(struct virtqueue *_vq)
>>>> * entry. Always do both to keep code simple. */
>>>> vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
>>>> /* Make sure used event never go backwards */
>>>> - if (!vring_need_event(vring_used_event(&vq->vring),
>>>> - vq->vring.avail->idx, last_used_idx))
>>>> + if (vq->vring.avail->idx != vring_used_event(&vq->vring) &&
>>>> + !vring_need_event(vring_used_event(&vq->vring),
>>>> + vq->vring.avail->idx, last_used_idx)) {
>>>> vring_used_event(&vq->vring) = last_used_idx;
>>>> + }
>>>> END_USE(vq);
>>>> return last_used_idx;
>>>> }
>>>> EXPORT_SYMBOL_GPL(virtqueue_enable_cb_prepare);
>>>>
>>> I see you are also changing virtqueue_enable_cb_prepare, why?
>> This is also used to prevent it from moving the used event backwards.
>> This may happens when we handle tx napi after we publish avail idx as
>> used event (virtqueue_enable_cb_avail() was called).
> So it's wrong exactly in the same way.
>
> But also, please document this stuff, don't put
> unrelated changes in a patch called "introduce
> virtqueue_enable_cb_avail".
>
>
>>>> +bool virtqueue_enable_cb_avail(struct virtqueue *_vq)
>>>> +{
>>>> + struct vring_virtqueue *vq = to_vvq(_vq);
>>>> + bool ret;
>>>> +
>>>> + START_USE(vq);
>>>> + vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
>>>> + vring_used_event(&vq->vring) = vq->vring.avail->idx;
>>>> + ret = vring_need_event(vq->vring.avail->idx,
>>>> + vq->last_used_idx, vq->vring.used->idx);
>>>> + END_USE(vq);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(virtqueue_enable_cb_avail);
>>>> +
>>>> /**
>>>> * virtqueue_poll - query pending used buffers
>>>> * @vq: the struct virtqueue we're talking about.
>>> Could not figure out what this does.
>>> Please add documentation.
>>>
>> Sure, does something like below explain what does this function do?
>>
>> /**
>>
>> * virtqueue_enable_cb_avail - restart callbacks after
>> disable_cb.
>> * @vq: the struct virtqueue we're talking
>> about.
>> *
>>
>> * This re-enables callbacks but hints to the other side to
>> delay
>> * interrupts all of the available buffers have been processed;
>
> So this is like virtqueue_enable_cb_delayed but even more
> aggressive?
> I think it's too agressive: it's better to wake up guest
> after you are through most of buffers, but not all,
> so guest and host can work in parallel.
Note that:
- it was only used when there are still few of free slots (which is
greater than 2 + MAX_SKB_FRAGS)
- my patch keeps the free_old_xmit_skbs() in the beginning of
start_xmit(), so the tx skb reclaiming does not depends totally on tx
interrupt. If more packets comes, we'd expect some of them were freed in
ndo_start_xmit(). If not, finally we may trigger the
virtqueue_enable_cb_delayed().
So probably not as aggressive as it looks. I will do benchmark on this.
>
>
>> * it returns "false" if there are at least one pending buffer in the
>> queue,
>> * to detect a possible race between the driver checking for more
>> work,
>> * and enabling
>> callbacks.
>> *
>>
>> * Caller must ensure we don't call this with other
>> virtqueue
>> * operations at the same time (except where
>> noted).
>> */
>>
>>>> diff --git a/include/linux/virtio.h b/include/linux/virtio.h
>>>> index b46671e..bfaf058 100644
>>>> --- a/include/linux/virtio.h
>>>> +++ b/include/linux/virtio.h
>>>> @@ -65,6 +65,8 @@ bool virtqueue_enable_cb(struct virtqueue *vq);
>>>>
>>>> unsigned virtqueue_enable_cb_prepare(struct virtqueue *vq);
>>>>
>>>> +bool virtqueue_enable_cb_avail(struct virtqueue *vq);
>>>> +
>>>> bool virtqueue_poll(struct virtqueue *vq, unsigned);
>>>>
>>>> bool virtqueue_enable_cb_delayed(struct virtqueue *vq);
>>>> --
>>>> 1.7.1
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>> the body of a message to majordomo@...r.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>> Please read the FAQ at http://www.tux.org/lkml/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists