lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 23 Oct 2014 14:37:31 -0700
From:	Anish Bhatt <anish@...lsio.com>
To:	netdev@...r.kernel.org
Cc:	davem@...emloft.net, hariprasad@...lsio.com, leedom@...lsio.com,
	Anish Bhatt <anish@...lsio.com>
Subject: [PATCH net 2/2] cxgb4 : Handle dcb enable correctly

Disabling DCBx in firmware automatically enables DCBx for control via host
lldp agents. Wait for an explicit setstate call from an lldp agents to enable
 DCBx instead.

Fixes: 76bcb31efc06 ("cxgb4 : Add DCBx support codebase and dcbnl_ops")

Signed-off-by: Anish Bhatt <anish@...lsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c  | 7 ++++++-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 6 +++++-
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
index ee819fd..6fe300e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -116,7 +116,6 @@ void cxgb4_dcb_state_fsm(struct net_device *dev,
 			/* we're going to use Host DCB */
 			dcb->state = CXGB4_DCB_STATE_HOST;
 			dcb->supported = CXGB4_DCBX_HOST_SUPPORT;
-			dcb->enabled = 1;
 			break;
 		}
 
@@ -386,6 +385,12 @@ static u8 cxgb4_setstate(struct net_device *dev, u8 enabled)
 {
 	struct port_info *pi = netdev2pinfo(dev);
 
+	/* If DCBx is host-managed, dcb is enabled by outside lldp agents */
+	if (pi->dcb.state == CXGB4_DCB_STATE_HOST) {
+		pi->dcb.enabled = enabled;
+		return 0;
+	}
+
 	/* Firmware doesn't provide any mechanism to control the DCB state.
 	 */
 	if (enabled != (pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED))
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 3f60070..97683c1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -694,7 +694,11 @@ int cxgb4_dcb_enabled(const struct net_device *dev)
 #ifdef CONFIG_CHELSIO_T4_DCB
 	struct port_info *pi = netdev_priv(dev);
 
-	return pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED;
+	if (!pi->dcb.enabled)
+		return 0;
+
+	return ((pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED) ||
+		(pi->dcb.state == CXGB4_DCB_STATE_HOST));
 #else
 	return 0;
 #endif
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ