[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1414123806-20049-5-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 23 Oct 2014 21:10:01 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Neerav Parikh <neerav.parikh@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 4/9] i40e/i40evf: Use usleep_range() instead of udelay()
From: Neerav Parikh <neerav.parikh@...el.com>
As per the Documentation/timers/timers-howto.txt it is preferred to use
usleep_range() instead of udelay() if the delay value is > 10us in
non-atomic contexts.
So, replacing all the instances of udelay() with 10 or greater than 10
micro seconds delay in the driver and using usleep_range() instead.
Change-ID: Iaa2ab499a4c26f6005e5d86cc421407ef9de16c7
Reported-by: Fengguang Wu <fengguang.wu@...el.com>
Signed-off-by: Neerav Parikh <neerav.parikh@...el.com>
Tested-by: Jim Young <jamesx.m.young@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d40fc3b..f7464e8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3440,7 +3440,7 @@ static int i40e_pf_txq_wait(struct i40e_pf *pf, int pf_q, bool enable)
if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
break;
- udelay(10);
+ usleep_range(10, 20);
}
if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
return -ETIMEDOUT;
@@ -3466,7 +3466,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
/* warn the TX unit of coming changes */
i40e_pre_tx_queue_cfg(&pf->hw, pf_q, enable);
if (!enable)
- udelay(10);
+ usleep_range(10, 20);
for (j = 0; j < 50; j++) {
tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
@@ -3526,7 +3526,7 @@ static int i40e_pf_rxq_wait(struct i40e_pf *pf, int pf_q, bool enable)
if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
break;
- udelay(10);
+ usleep_range(10, 20);
}
if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
return -ETIMEDOUT;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 4eeed26..fff3c27 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -674,7 +674,7 @@ void i40e_reset_vf(struct i40e_vf *vf, bool flr)
* that the requested op was completed
* successfully
*/
- udelay(10);
+ usleep_range(10, 20);
reg = rd32(hw, I40E_VPGEN_VFRSTAT(vf->vf_id));
if (reg & I40E_VPGEN_VFRSTAT_VFRD_MASK) {
rsd = true;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index c51bc7a..dabe6a4 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1494,7 +1494,7 @@ static void i40evf_reset_task(struct work_struct *work)
while (test_and_set_bit(__I40EVF_IN_CRITICAL_TASK,
&adapter->crit_section))
- udelay(500);
+ usleep_range(500, 1000);
if (adapter->flags & I40EVF_FLAG_RESET_NEEDED) {
dev_info(&adapter->pdev->dev, "Requesting reset from PF\n");
@@ -1980,7 +1980,7 @@ static int i40evf_check_reset_complete(struct i40e_hw *hw)
if ((rstat == I40E_VFR_VFACTIVE) ||
(rstat == I40E_VFR_COMPLETED))
return 0;
- udelay(10);
+ usleep_range(10, 20);
}
return -EBUSY;
}
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists