[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20141028133609.2bf6c745@ipc1.ka-ro>
Date: Tue, 28 Oct 2014 13:36:09 +0100
From: Lothar Waßmann <LW@...O-electronics.de>
To: David Laight <David.Laight@...LAB.COM>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>,
Russell King <rmk+kernel@....linux.org.uk>,
Frank Li <Frank.Li@...escale.com>,
"Fabio Estevam" <fabio.estevam@...escale.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by
rx_copybreak support
Hi,
David Laight wrote:
> From: Lothar Waßmann
> > commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance")
> > introduced a regression for i.MX28. The swap_buffer() function doing
> > the endian conversion of the received data on i.MX28 may access memory
> > beyond the actual packet size in the DMA buffer. fec_enet_copybreak()
> > does not copy those bytes, so that the last bytes of a packet may be
> > filled with invalid data after swapping.
> > This will likely lead to checksum errors on received packets.
> > E.g. when trying to mount an NFS rootfs:
> > UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36
> >
> > Do the byte swapping and copying to the new skb in one go if
> > necessary.
> >
> > Signed-off-by: Lothar Wamann <LW@...O-electronics.de>
> > ---
> > drivers/net/ethernet/freescale/fec_main.c | 25 +++++++++++++++++++++----
> > 1 file changed, 21 insertions(+), 4 deletions(-)
> >
> > @@ -1455,7 +1472,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
> > prefetch(skb->data - NET_IP_ALIGN);
> > skb_put(skb, pkt_len - 4);
> > data = skb->data;
> > - if (fep->quirks & FEC_QUIRK_SWAP_FRAME)
> > + if (!is_copybreak && need_swap)
> > swap_buffer(data, pkt_len);
>
> It has to be better to set the 'copybreak' limit to be larger than the
> maximum frame size and so always go through the 'copybreak' paths.
>
Since the copybreak support is all about performance optimistation, we
should IMO buy the additional advantage for i.MX28 by not having to
access the buffer twice (once for copying and once again for swapping).
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@...o-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists