netdev - [PATCH V1 net-next 3/5] net/mlx4_en: Remove RX buffers alignment to IP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sun,  2 Nov 2014 16:26:15 +0200
From:	Or Gerlitz <ogerlitz@...lanox.com>
To:	"David S. Miller" <davem@...emloft.net>
Cc:	netdev@...r.kernel.org, Matan Barak <matanb@...lanox.com>,
	Amir Vadai <amirv@...lanox.com>,
	Saeed Mahameed <saeedm@...lanox.com>,
	Shani Michaeli <shanim@...lanox.com>,
	Ido Shamay <idos@...lanox.com>
Subject: [PATCH V1 net-next 3/5] net/mlx4_en: Remove RX buffers alignment to IP_ALIGN

From: Ido Shamay <idos@...lanox.com>

When IP_ALIGN has a non zero value, hardware will write to a non aligned
address. The only reader from this address is when copying the header
from the first frag into the linear buffer (further access to the IP
address will be from the linear buffer, in which the headers are
aligned). Since the penalty of non align access by the hardware is
greater than the software memcpy, changing the frag_align to always be 0.

Signed-off-by: Ido Shamay <idos@...lanox.com>
Signed-off-by: Amir Vadai <amirv@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c   |   16 ++++------------
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h |    1 -
 2 files changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index c8e75da..4cb716f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -74,7 +74,7 @@ static int mlx4_alloc_pages(struct mlx4_en_priv *priv,
 	page_alloc->page_size = PAGE_SIZE << order;
 	page_alloc->page = page;
 	page_alloc->dma = dma;
-	page_alloc->page_offset = frag_info->frag_align;
+	page_alloc->page_offset = 0;
 	/* Not doing get_page() for each frag is a big win
 	 * on asymetric workloads. Note we can not use atomic_set().
 	 */
@@ -945,15 +945,8 @@ void mlx4_en_calc_rx_buf(struct net_device *dev)
 			(eff_mtu > buf_size + frag_sizes[i]) ?
 				frag_sizes[i] : eff_mtu - buf_size;
 		priv->frag_info[i].frag_prefix_size = buf_size;
-		if (!i)	{
-			priv->frag_info[i].frag_align = NET_IP_ALIGN;
-			priv->frag_info[i].frag_stride =
-				ALIGN(frag_sizes[i] + NET_IP_ALIGN, SMP_CACHE_BYTES);
-		} else {
-			priv->frag_info[i].frag_align = 0;
-			priv->frag_info[i].frag_stride =
-				ALIGN(frag_sizes[i], SMP_CACHE_BYTES);
-		}
+		priv->frag_info[i].frag_stride = ALIGN(frag_sizes[i],
+						       SMP_CACHE_BYTES);
 		buf_size += priv->frag_info[i].frag_size;
 		i++;
 	}
@@ -966,11 +959,10 @@ void mlx4_en_calc_rx_buf(struct net_device *dev)
 	       eff_mtu, priv->num_frags);
 	for (i = 0; i < priv->num_frags; i++) {
 		en_err(priv,
-		       "  frag:%d - size:%d prefix:%d align:%d stride:%d\n",
+		       "  frag:%d - size:%d prefix:%d stride:%d\n",
 		       i,
 		       priv->frag_info[i].frag_size,
 		       priv->frag_info[i].frag_prefix_size,
-		       priv->frag_info[i].frag_align,
 		       priv->frag_info[i].frag_stride);
 	}
 }
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 6beb4d3..ef83d12 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -481,7 +481,6 @@ struct mlx4_en_frag_info {
 	u16 frag_size;
 	u16 frag_prefix_size;
 	u16 frag_stride;
-	u16 frag_align;
 };
 
 #ifdef CONFIG_MLX4_EN_DCB
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html