[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1415096461-25576-6-git-send-email-rogerq@ti.com>
Date: Tue, 4 Nov 2014 12:20:58 +0200
From: Roger Quadros <rogerq@...com>
To: <wg@...ndegger.com>, <mkl@...gutronix.de>
CC: <wsa@...-dreams.de>, <tony@...mide.com>, <tglx@...utronix.de>,
<mugunthanvnm@...com>, <george.cherian@...com>, <balbi@...com>,
<nsekhar@...com>, <nm@...com>,
<sergei.shtylyov@...entembedded.com>, <linux-omap@...r.kernel.org>,
<linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
Roger Quadros <rogerq@...com>
Subject: [PATCH v3 5/8] net: can: c_can: Add support for START pulse in RAMINIT sequence
Some SoCs e.g. (TI DRA7xx) need a START pulse to start the
RAMINIT sequence i.e. START bit must be set and cleared before
checking for the DONE bit status.
Signed-off-by: Roger Quadros <rogerq@...com>
---
drivers/net/can/c_can/c_can_platform.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index d0ce439..ef1f5ce 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -124,6 +124,12 @@ static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
ctrl |= 1 << start_bit;
regmap_write(raminit->syscon, raminit->reg, ctrl);
+ /* clear START bit if start pulse is needed */
+ if (priv->drvdata->raminit_pulse) {
+ ctrl &= ~(1 << start_bit);
+ regmap_write(raminit->syscon, raminit->reg, ctrl);
+ }
+
ctrl |= 1 << done_bit;
c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists