netdev - am335x: cpsw: phy ignores max-speed setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 6 Nov 2014 17:25:13 +0100
From:	Yegor Yefremov <yegorslists@...glemail.com>
To:	netdev <netdev@...r.kernel.org>
Cc:	"N, Mugunthan V" <mugunthanvnm@...com>, mpa@...gutronix.de,
	lsorense@...lub.uwaterloo.ca, Daniel Mack <zonque@...il.com>
Subject: am335x: cpsw: phy ignores max-speed setting

I' m trying to override max-speed setting for both CPSW connected
PHYs. This is my DTS section for configuring CPSW:

&mac {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
        dual_emac = <1>;

        status = "okay";
};

&davinci_mdio {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;

        status = "okay";
};

&cpsw_emac0 {
        phy_id = <&davinci_mdio>, <0>;
        phy-mode = "rgmii-id";
        dual_emac_res_vlan = <1>;
        max-speed = <100>;
};

&cpsw_emac1 {
        phy_id = <&davinci_mdio>, <1>;
        phy-mode = "rgmii-id";
        dual_emac_res_vlan = <2>;
        max-speed = <100>;
};

But in drivers/net/phy/phy_device.c->of_set_phy_supported() routine I
don't get through node check, i.e. node == NULL. Any idea why?

static void of_set_phy_supported(struct phy_device *phydev)
{
        struct device_node *node = phydev->dev.of_node;
        u32 max_speed;

        if (!IS_ENABLED(CONFIG_OF_MDIO))
                return;

        if (!node)
                return;

        if (!of_property_read_u32(node, "max-speed", &max_speed)) {
                /* The default values for phydev->supported are
provided by the PHY
                 * driver "features" member, we want to reset to sane
defaults fist
                 * before supporting higher speeds.
                 */
                phydev->supported &= PHY_DEFAULT_FEATURES;

                switch (max_speed) {
                default:
                        return;

                case SPEED_1000:
                        phydev->supported |= PHY_1000BT_FEATURES;
                case SPEED_100:
                        phydev->supported |= PHY_100BT_FEATURES;
                case SPEED_10:
                        phydev->supported |= PHY_10BT_FEATURES;
                }
        }
}

Yegor
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html