| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201411091918.04036.linux@rainbow-software.org>
Date: Sun, 9 Nov 2014 19:18:03 +0100
From: Ondrej Zary <linux@...nbow-software.org>
To: e1000-devel@...ts.sourceforge.net
Cc: netdev@...r.kernel.org,
Kernel development list <linux-kernel@...r.kernel.org>
Subject: Re: e100: Laptop battery drain and WoL settings from EEPROM
On Sunday 09 November 2014 00:15:41 Ondrej Zary wrote:
> Hello,
> there is long-standing problem with battery drain after turning off at
> least some Toshiba laptops, see
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/110784
>
> I have the same problem with Toshiba Portege R100. When I shut it down in
> Linux, the battery is drained to zero in a couple of days. I noticed that
> the LAN port is still active, even when AC disconnected.
>
> The WoL is enabled by default by e100 driver:
>
> # ethtool eth0
> Settings for eth0:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Supported pause frame use: No
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Advertised pause frame use: Symmetric
> Advertised auto-negotiation: Yes
> Link partner advertised link modes: 10baseT/Half
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: No
> Speed: 10Mb/s
> Duplex: Half
> Port: MII
> PHYAD: 1
> Transceiver: internal
> Auto-negotiation: on
> Supports Wake-on: g
> Wake-on: g
> Current message level: 0x00000007 (7)
> drv probe link
> Link detected: yes
>
> By this code:
> /* Wol magic packet can be enabled from eeprom */
> if ((nic->mac >= mac_82558_D101_A4) &&
> (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
> nic->flags |= wol_magic;
> device_set_wakeup_enable(&pdev->dev, true);
> }
>
> because the WoL bit is set in EEPROM ID word:
>
> # ethtool -e eth0
> Offset Values
> ------ ------
> 0x0000: xx xx xx xx xx xx 03 1b 00 00 01 02 01 47 00 00
> 0x0010: 00 00 00 00 a2 49 01 00 79 11 7f 00 00 00 00 00
> ^^ bit 5 here
> 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0x0040: 00 00 00 00 00 00 3d 10 00 00 00 00 00 00 00 00
> 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0x0060: e4 00 3f 40 09 41 00 00 00 00 00 00 00 00 00 00
> 0x0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f7 fe
>
> Looks like this laptop is probably WoL-capable even on battery.
>
> Measured the current from AC adapter:
> around 20mA with WoL inactive (shut down from Windows or by power button in
> GRUB) around 40mA with WoL active (shut down from Linux)
>
> So to work-around this problem, users must disable WoL manually on each
> boot.
>
> Maybe the driver should ignore the EEPROM WoL bit on Toshiba susbsystem
> IDs? Or completely, like Windows driver does?
Suggested patch:
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 781065e..bd4fe64 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2949,13 +2949,6 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
- /* Wol magic packet can be enabled from eeprom */
- if ((nic->mac >= mac_82558_D101_A4) &&
- (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
- nic->flags |= wol_magic;
- device_set_wakeup_enable(&pdev->dev, true);
- }
-
/* ack any pending wake events, disable PME */
pci_pme_active(pdev, false);
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists