[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <54610F8B.2000600@houston-radar.com>
Date: Mon, 10 Nov 2014 12:18:35 -0700
From: Brian Hill <brian@...ston-radar.com>
To: netdev@...r.kernel.org
Subject: [PATCH] net: phy: Correctly handle MII ioctl which changes autonegotiation.
When advertised capabilities are changed with mii-tool,
such as:
mii-tool -A 10baseT
the existing handler has two errors.
- An actual PHY register value is provided by mii-tool, and this
must be mapped to internal state with mii_adv_to_ethtool_adv_t().
- The PHY state machine needs to be told that autonegotiation has
again been performed. If not, the MAC will not be notified of
the new link speed and duplex, resulting in a possible config
mismatch.
Signed-off-by: Brian Hill <Brian@...ston-radar.com>
---
drivers/net/phy/phy.c | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c94e2a2..ee9f0c9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -352,6 +352,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct
ifreq *ifr, int cmd)
{
struct mii_ioctl_data *mii_data = if_mii(ifr);
u16 val = mii_data->val_in;
+ int change_autoneg = 0;
switch (cmd) {
case SIOCGMIIPHY:
@@ -367,22 +368,29 @@ int phy_mii_ioctl(struct phy_device *phydev,
struct ifreq *ifr, int cmd)
if (mii_data->phy_id == phydev->addr) {
switch (mii_data->reg_num) {
case MII_BMCR:
- if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0)
+ if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
+ if (phydev->autoneg == AUTONEG_ENABLE)
+ change_autoneg = 1;
phydev->autoneg = AUTONEG_DISABLE;
- else
+ if (val & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+ if (val & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (val & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else phydev->speed = SPEED_10;
+ }
+ else {
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ change_autoneg = 1;
phydev->autoneg = AUTONEG_ENABLE;
- if (!phydev->autoneg && (val & BMCR_FULLDPLX))
- phydev->duplex = DUPLEX_FULL;
- else
- phydev->duplex = DUPLEX_HALF;
- if (!phydev->autoneg && (val & BMCR_SPEED1000))
- phydev->speed = SPEED_1000;
- else if (!phydev->autoneg &&
- (val & BMCR_SPEED100))
- phydev->speed = SPEED_100;
+ }
break;
case MII_ADVERTISE:
- phydev->advertising = val;
+ phydev->advertising = mii_adv_to_ethtool_adv_t(val);
+ change_autoneg = 1;
break;
default:
/* do nothing */
@@ -396,6 +404,10 @@ int phy_mii_ioctl(struct phy_device *phydev, struct
ifreq *ifr, int cmd)
if (mii_data->reg_num == MII_BMCR &&
val & BMCR_RESET)
return phy_init_hw(phydev);
+
+ if (change_autoneg)
+ return phy_start_aneg(phydev);
+
return 0;
case SIOCSHWTSTAMP:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists