[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 11 Nov 2014 14:55:14 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 5/5] net: phy: bcm7xxx: add workaround for PHY revision E0 and F0
PHY revisions E0 and F0 share the same shorter workaround initialization
sequence. Dedicate a special function for these two PHY revisions to
perform the needed workaround sequence.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/phy/bcm7xxx.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 0ce527744513..1b5f3c1a5093 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -162,6 +162,31 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
static int bcm7xxx_apd_enable(struct phy_device *phydev)
{
int val;
@@ -225,6 +250,10 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
case 0xd0:
ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
break;
+ case 0xe0:
+ case 0xf0:
+ ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
+ break;
default:
break;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists