[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1416347143.2295.25.camel@jtkirshe-mobl>
Date: Tue, 18 Nov 2014 13:45:43 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
jogreene@...hat.com
Subject: Re: [net-next v2 00/11][pull request] Intel Wired LAN Driver
Updates 2014-11-18
On Tue, 2014-11-18 at 13:38 -0500, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
> Date: Tue, 18 Nov 2014 01:25:20 -0800
>
> > This series contains updates to i40e only.
> >
> > Shannon provides a patch to clean up the driver to only warn once that
> > PTP is not supported when linked at 100Mbps.
> >
> > Mitch provides a fix for i40e where the VF interrupt processing takes
> > a long time and it is possible that we could lose a VFLR event if it
> > happens while processing a VFLR on another VF. To correct this situation,
> > we enable the VFLR interrupt cause before we begin processing any pending
> > resets.
> >
> > Neerav provides several patches to update DCB support in i40e. When
> > there are DCB configuration changes based on DCBx, the firmware suspends
> > the port's Tx and generates an event to the PF. The PF is then
> > responsible to reconfigure the PF VSIs and switching topology as per the
> > updated DCB configuration and then resume the port's Tx by calling the
> > "Resume Port Tx" AQ command, so add this call to the flow that handles
> > DCB re-configuration in the PF. Allow the driver to query and use DCB
> > configuration from firmware when firmware DCBx agent is in CEE mode.
> > Add a check whether LLDP Agent's default AdminStatus is enabled or
> > disabled on a given port, and sets DCBx status to disabled if the
> > status is disabled. Fix an issue when the port TC configuration
> > changes as a result of DCBx and the driver modifies the enabled TCs for
> > the VEBs it manages but does not update the enabled_tc value that
> > was cached on a per VEB basis. Add a new PF state so that if a port's
> > Tx is in suspended state the Tx queue disable flow would just put the
> > request for the queue to be disabled and return without waiting for the
> > queue to be actually disabled. Allows the driver to enable/disable
> > the XPS based on the number of TCs being enabled for the given VSI.
>
> Pulled, thanks Jeff.
>
> > v2: Dropped patch "i40e: Handle a single mss packet with more than 8 frags"
> > while we rework the patch after we test a bit more based on feedback from
> > Eric Dumazet.
>
> Since, as Eric showed, it's easy to hang the card with a simple
> netperf command line due to this issue, you might want to consider
> sending that fix to 'net' instead.
Got it, I have ear marked the revised patch for 'net'.
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists