netdev - Re: [PATCH 3/4] GMAC: dts: add gmac info for rk3288

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1773507.kOcjDCLbcs@diego>
Date:	Tue, 25 Nov 2014 15:39:37 +0100
From:	Heiko Stübner <heiko@...ech.de>
To:	Roger Chen <roger.chen@...k-chips.com>
Cc:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	peppe.cavallaro@...com, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
	kever.yang@...k-chips.com, mark.yao@...k-chips.com,
	eddie.cai@...k-chips.com
Subject: Re: [PATCH 3/4] GMAC: dts: add gmac info for rk3288

Am Dienstag, 25. November 2014, 16:40:59 schrieb Sergei Shtylyov:
> Hello.
> 
> On 11/25/2014 12:08 PM, Roger Chen wrote:
> > add gmac info in rk3288.dtsi for GMAC driver
> > 
> > Signed-off-by: Roger Chen <roger.chen@...k-chips.com>
> > ---
> > 
> >   arch/arm/boot/dts/rk3288.dtsi |   59
> >   +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59
> >   insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> > index 0f50d5d..949675d 100644
> > --- a/arch/arm/boot/dts/rk3288.dtsi
> > +++ b/arch/arm/boot/dts/rk3288.dtsi
> 
> [...]
> 
> > @@ -490,6 +497,25 @@
> > 
> >   		reg = <0xff740000 0x1000>;
> >   	
> >   	};
> > 
> > +	gmac: eth@...90000 {
> 
>     Please name the node "ethernet@...90000" to comply with the ePAPR
> standard.
> > +		compatible = "rockchip,rk3288-gmac";
> > +		reg = <0xff290000 0x10000>;
> > +		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;  /*irq=59*/
> > +		interrupt-names = "macirq";
> > +		rockchip,grf = <&grf>;
> > +		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_PLL>,
> > +			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
> > +			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
> > +			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
> > +		clock-names = "stmmaceth", "clk_mac_pll",
> > +			"mac_clk_rx", "mac_clk_tx",
> > +			"clk_mac_ref", "clk_mac_refout",
> > +			"aclk_mac", "pclk_mac";
> > +		phy-mode = "rgmii";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&rgmii_pin /*&rmii_pin*/>;
> 
>     Hm, pinctrl props in a .dtsi file? Those are usually board dependent.

yep, especially as there is a board-dependent selection needed of what to use 
[rgmii or rmii] depending on the phy on the board.


> 
> [...]
> 
> > @@ -1040,5 +1066,38 @@
> > 
> >   				rockchip,pins = <7 23 3 &pcfg_pull_none>;
> >   			
> >   			};
> >   		
> >   		};
> > 
> > +
> > +		gmac {
> > +			rgmii_pin: rgmii-pins {

please add the "s" to the label - "rgmii_pins"


> > +				rockchip,pins = <3 30 3 &pcfg_pull_none>,
> > +						<3 31 3 &pcfg_pull_none>,
> > +						<3 26 3 &pcfg_pull_none>,
> > +						<3 27 3 &pcfg_pull_none>,
> > +						<3 28 3 &pcfg_pull_none>,
> > +						<3 29 3 &pcfg_pull_none>,
> > +						<3 24 3 &pcfg_pull_none>,
> > +						<3 25 3 &pcfg_pull_none>,
> > +						<4 0 3 &pcfg_pull_none>,
> > +						<4 5 3 &pcfg_pull_none>,
> > +						<4 6 3 &pcfg_pull_none>,
> > +						<4 9 3 &pcfg_pull_none>,
> > +						<4 4 3 &pcfg_pull_none>,
> > +						<4 1 3 &pcfg_pull_none>,
> > +						<4 3 3 &pcfg_pull_none>;
> > +			};
> > +
> > +			rmii_pin: rmii-pins {

same here


> > +				rockchip,pins = <3 30 3 &pcfg_pull_none>,
> > +						<3 31 3 &pcfg_pull_none>,
> > +						<3 28 3 &pcfg_pull_none>,
> > +						<3 29 3 &pcfg_pull_none>,
> > +						<4 0 3 &pcfg_pull_none>,
> > +						<4 5 3 &pcfg_pull_none>,
> > +						<4 4 3 &pcfg_pull_none>,
> > +						<4 1 3 &pcfg_pull_none>,
> > +						<4 2 3 &pcfg_pull_none>,
> > +						<4 3 3 &pcfg_pull_none>;
> > +			};
> > +		};
> 
>     These are usually define in the board .dts file...

The pinctrl settings itself are soc-specific, i.e. the pins and their settings 
to use to enable r{g}mii functionality are the same for all boards using this 
soc, so the pinctrl definitions should stay here and not be redefined in each 
and every board file.


Heiko
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html