| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9b39dc479fae4456a9868770bea3d95c@BN1AFFO11FD035.protection.gbl>
Date: Fri, 28 Nov 2014 01:47:42 +0000
From: Appana Durga Kedareswara Rao <appana.durga.rao@...inx.com>
To: Michal Simek <michals@...inx.com>,
"wg@...ndegger.com" <wg@...ndegger.com>,
"mkl@...gutronix.de" <mkl@...gutronix.de>,
Michal Simek <michals@...inx.com>,
Soren Brinkmann <sorenb@...inx.com>,
"grant.likely@...aro.org" <grant.likely@...aro.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH v3] can: Convert to runtime_pm
Hi Michal,
-----Original Message-----
From: Michal Simek [mailto:michal.simek@...inx.com]
Sent: Thursday, November 27, 2014 8:17 PM
To: Appana Durga Kedareswara Rao; wg@...ndegger.com; mkl@...gutronix.de; Michal Simek; Soren Brinkmann; grant.likely@...aro.org; robh+dt@...nel.org
Cc: linux-can@...r.kernel.org; netdev@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org; devicetree@...r.kernel.org; Appana Durga Kedareswara Rao
Subject: Re: [PATCH v3] can: Convert to runtime_pm
On 11/27/2014 02:08 PM, Kedareswara rao Appana wrote:
> Instead of enabling/disabling clocks at several locations in the
> driver, use the runtime_pm framework. This consolidates the actions
> for runtime PM in the appropriate callbacks and makes the driver more
> readable and mantainable.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
> Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
> ---
> Changes for v3:
> - Converted the driver to use runtime_pm.
> Changes for v2:
> - Removed the struct platform_device* from suspend/resume
> as suggest by Lothar.
>
> drivers/net/can/xilinx_can.c | 119
> +++++++++++++++++++++++++----------------
> 1 files changed, 72 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/net/can/xilinx_can.c
> b/drivers/net/can/xilinx_can.c index 8a998e3..1be28ed 100644
> --- a/drivers/net/can/xilinx_can.c
> +++ b/drivers/net/can/xilinx_can.c
> @@ -32,6 +32,7 @@
> #include <linux/can/dev.h>
> #include <linux/can/error.h>
> #include <linux/can/led.h>
> +#include <linux/pm_runtime.h>
>
> #define DRIVER_NAME "xilinx_can"
>
> @@ -138,7 +139,7 @@ struct xcan_priv {
> u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
> void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
> u32 val);
> - struct net_device *dev;
> + struct device *dev;
> void __iomem *reg_base;
> unsigned long irq_flags;
> struct clk *bus_clk;
> @@ -842,6 +843,13 @@ static int xcan_open(struct net_device *ndev)
> struct xcan_priv *priv = netdev_priv(ndev);
> int ret;
>
> + ret = pm_runtime_get_sync(priv->dev);
> + if (ret < 0) {
> + netdev_err(ndev, "%s: runtime CAN resume failed(%d)\n\r",
> + __func__, ret);
> + return ret;
> + }
> +
> ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
> ndev->name, ndev);
> if (ret < 0) {
> @@ -849,29 +857,17 @@ static int xcan_open(struct net_device *ndev)
> goto err;
> }
>
> - ret = clk_prepare_enable(priv->can_clk);
> - if (ret) {
> - netdev_err(ndev, "unable to enable device clock\n");
> - goto err_irq;
> - }
> -
> - ret = clk_prepare_enable(priv->bus_clk);
> - if (ret) {
> - netdev_err(ndev, "unable to enable bus clock\n");
> - goto err_can_clk;
> - }
> -
> /* Set chip into reset mode */
> ret = set_reset_mode(ndev);
> if (ret < 0) {
> netdev_err(ndev, "mode resetting failed!\n");
> - goto err_bus_clk;
> + goto err_irq;
> }
>
> /* Common open */
> ret = open_candev(ndev);
> if (ret)
> - goto err_bus_clk;
> + goto err_irq;
>
> ret = xcan_chip_start(ndev);
> if (ret < 0) {
> @@ -887,13 +883,11 @@ static int xcan_open(struct net_device *ndev)
>
> err_candev:
> close_candev(ndev);
> -err_bus_clk:
> - clk_disable_unprepare(priv->bus_clk);
> -err_can_clk:
> - clk_disable_unprepare(priv->can_clk);
> err_irq:
> free_irq(ndev->irq, ndev);
> err:
> + pm_runtime_put(priv->dev);
> +
> return ret;
> }
>
> @@ -910,12 +904,11 @@ static int xcan_close(struct net_device *ndev)
> netif_stop_queue(ndev);
> napi_disable(&priv->napi);
> xcan_chip_stop(ndev);
> - clk_disable_unprepare(priv->bus_clk);
> - clk_disable_unprepare(priv->can_clk);
> free_irq(ndev->irq, ndev);
> close_candev(ndev);
>
> can_led_event(ndev, CAN_LED_EVENT_STOP);
> + pm_runtime_put(priv->dev);
>
> return 0;
> }
> @@ -934,27 +927,21 @@ static int xcan_get_berr_counter(const struct net_device *ndev,
> struct xcan_priv *priv = netdev_priv(ndev);
> int ret;
>
> - ret = clk_prepare_enable(priv->can_clk);
> - if (ret)
> - goto err;
> + ret = pm_runtime_get_sync(priv->dev);
> + if (ret < 0) {
> + netdev_err(ndev, "%s: runtime resume failed(%d)\n\r",
> + __func__, ret);
> + return ret;
> + }
>
> - ret = clk_prepare_enable(priv->bus_clk);
> - if (ret)
> - goto err_clk;
>
> bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
> bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
> XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
>
> - clk_disable_unprepare(priv->bus_clk);
> - clk_disable_unprepare(priv->can_clk);
> + pm_runtime_put(priv->dev);
>
> return 0;
> -
> -err_clk:
> - clk_disable_unprepare(priv->can_clk);
> -err:
> - return ret;
> }
>
>
> @@ -967,15 +954,45 @@ static const struct net_device_ops
> xcan_netdev_ops = {
>
> /**
> * xcan_suspend - Suspend method for the driver
> - * @dev: Address of the platform_device structure
> + * @dev: Address of the net_device structure
This is just the device structure.
K will modify in the next version of the patch .
> *
> * Put the driver into low power mode.
> - * Return: 0 always
> + * Return: 0 on success and failure value on error
> */
> static int __maybe_unused xcan_suspend(struct device *dev) {
> - struct platform_device *pdev = dev_get_drvdata(dev);
> - struct net_device *ndev = platform_get_drvdata(pdev);
> + if (!device_may_wakeup(dev))
> + return pm_runtime_force_suspend(dev);
> +
> + return 0;
> +}
> +
> +/**
> + * xcan_resume - Resume from suspend
> + * @dev: Address of the net_device structure
ditto
K will modify in the next version of the patch .
> + *
> + * Resume operation after suspend.
> + * Return: 0 on success and failure value on error */ static int
> +__maybe_unused xcan_resume(struct device *dev) {
> + if (!device_may_wakeup(dev))
> + return pm_runtime_force_resume(dev);
> +
> + return 0;
> +
> +}
> +
> +/**
> + * xcan_runtime_suspend - Runtime suspend method for the driver
> + * @dev: Address of the net_device structure
ditto.
K will modify in the next version of the patch .
> + *
> + * Put the driver into low power mode.
> + * Return: 0 always
> + */
> +static int __maybe_unused xcan_runtime_suspend(struct device *dev) {
> + struct net_device *ndev = dev_get_drvdata(dev);
> struct xcan_priv *priv = netdev_priv(ndev);
>
> if (netif_running(ndev)) {
> @@ -993,16 +1010,15 @@ static int __maybe_unused xcan_suspend(struct
> device *dev) }
>
> /**
> - * xcan_resume - Resume from suspend
> - * @dev: Address of the platformdevice structure
> + * xcan_runtime_resume - Runtime resume from suspend
> + * @dev: Address of the net_device structure
ditto.
K will modify in the next version of the patch .
Regards,
Kedar.
Thanks,
Michal
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists