[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1417562882-2511-2-git-send-email-f.fainelli@gmail.com>
Date: Tue, 2 Dec 2014 15:28:01 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next 1/2] net: bcmgenet: add support for new GENET PHY revision scheme
Starting with GPHY revision G0, the GENET register layout has changed to
use the same numbering scheme as the Starfighter 2 switch. This means
that GPHY major revision is in bits 15:12, minor in bits 11:8 and patch
level is in bits 7:4.
Introduce a small heuristic which checks for the old scheme first, tests
for the new scheme and finally attempts to catch reserved values and
aborts.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index f2fadb053d52..23e283174c4e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2503,6 +2503,7 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
struct bcmgenet_hw_params *params;
u32 reg;
u8 major;
+ u16 gphy_rev;
if (GENET_IS_V4(priv)) {
bcmgenet_dma_regs = bcmgenet_dma_regs_v3plus;
@@ -2551,8 +2552,29 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
* to pass this information to the PHY driver. The PHY driver expects
* to find the PHY major revision in bits 15:8 while the GENET register
* stores that information in bits 7:0, account for that.
+ *
+ * On newer chips, starting with PHY revision G0, a new scheme is
+ * deployed similar to the Starfighter 2 switch with GPHY major
+ * revision in bits 15:8 and patch level in bits 7:0. Major revision 0
+ * is reserved as well as special value 0x01ff, we have a small
+ * heuristic to check for the new GPHY revision and re-arrange things
+ * so the GPHY driver is happy.
*/
- priv->gphy_rev = (reg & 0xffff) << 8;
+ gphy_rev = (reg & 0xffff);
+
+ /* This the good old scheme, just GPHY major, no minor nor patch */
+ if ((gphy_rev & 0xf0) != 0)
+ priv->gphy_rev = gphy_rev << 8;
+
+ /* This is the new scheme, GPHY major rolls over with 0x10 = rev G0 */
+ else if ((gphy_rev & 0xff00) != 0)
+ priv->gphy_rev = gphy_rev;
+
+ /* This is reserved so should require special treatment */
+ else if (gphy_rev == 0 || gphy_rev == 0x01ff) {
+ pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev);
+ return;
+ }
#ifdef CONFIG_PHYS_ADDR_T_64BIT
if (!(params->flags & GENET_HAS_40BITS))
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists