netdev - [PATCH net-next] net/mlx4_en: ethtool force speed when asking for autoneg=off

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1417939634-26085-1-git-send-email-amirv@mellanox.com>
Date:	Sun,  7 Dec 2014 10:07:14 +0200
From:	Amir Vadai <amirv@...lanox.com>
To:	"David S. Miller" <davem@...emloft.net>
Cc:	netdev@...r.kernel.org, Or Gerlitz <ogerlitz@...lanox.com>,
	Yevgeny Petrilin <yevgenyp@...lanox.com>,
	Saeed Mahameed <saeedm@...lanox.com>,
	Amir Vadai <amirv@...lanox.com>
Subject: [PATCH net-next] net/mlx4_en: ethtool force speed when asking for autoneg=off

From: Saeed Mahameed <saeedm@...lanox.com>

Use cmd->autoneg == AUTONEG_DISABLE as a user hint to force specific speed.
We don't want to rely on ethtool to calculate advertised link modes when
forcing specific speed, a user can request a specific speed and specify
"autoneg off" in ethtool command to give a hint for forcing this speed.

Move en_warn("port reset..") inside the "port reset" block.

Fixes: d48b3ab ("net/mlx4_en: Use PTYS register to set ethtool settings (Speed)")
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
Signed-off-by: Amir Vadai <amirv@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index c45e06a..3045582 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -771,13 +771,13 @@ static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	proto_admin = cpu_to_be32(ptys_adv);
-	if (speed >= 0 && speed != priv->port_state.link_speed)
+	if (speed >= 0 && ((speed != priv->port_state.link_speed) ||
+			   (cmd->autoneg == AUTONEG_DISABLE)))
 		/* If speed was set then speed decides :-) */
 		proto_admin = speed_set_ptys_admin(priv, speed,
 						   ptys_reg.eth_proto_cap);
 
 	proto_admin &= ptys_reg.eth_proto_cap;
-
 	if (proto_admin == ptys_reg.eth_proto_admin)
 		return 0; /* Nothing to change */
 
@@ -798,9 +798,9 @@ static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		return ret;
 	}
 
-	en_warn(priv, "Port link mode changed, restarting port...\n");
 	mutex_lock(&priv->mdev->state_lock);
 	if (priv->port_up) {
+		en_warn(priv, "Port link mode changed, restarting port...\n");
 		mlx4_en_stop_port(dev, 1);
 		if (mlx4_en_start_port(dev))
 			en_err(priv, "Failed restarting port %d\n", priv->port);
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html