netdev - Re: tg3 broken in 3.18.0?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 11 Dec 2014 14:45:48 -0200
From:	Marcelo Ricardo Leitner <marcelo.leitner@...il.com>
To:	Nils Holland <nholland@...ys.org>, netdev@...r.kernel.org
Subject: Re: tg3 broken in 3.18.0?

On 10-12-2014 21:06, Nils Holland wrote:
> Hi everyone,
>
> I just upgraded a machine from 3.17.3 to 3.18.0 and noticed that after
> the upgrade, the machine's network interface (which is a tg3) would no
> longer run correctly (or, for that matter, run at all). During the
> upgrade, I didn't change any kernel config options or any other parts
> of the system.

Same thing here! Thanks for reporting this, Nils.

> Since the machine is remote and I don't have direct access to it, it's
> kind of hard currently to give more details, but here's what I'm
> seeing in the logs:

I have access to mine, kudos to secondary NIC.

$ ethtool -i p1p1
driver: tg3
version: 3.137
firmware-version: 5722-v3.13
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

$ ethtool p1p1
Settings for p1p1:
         Supported ports: [ TP ]
         Supported link modes:   10baseT/Half 10baseT/Full
                                 100baseT/Half 100baseT/Full
                                 1000baseT/Half 1000baseT/Full
         Supported pause frame use: No
         Supports auto-negotiation: Yes
         Advertised link modes:  10baseT/Half 10baseT/Full
                                 100baseT/Half 100baseT/Full
                                 1000baseT/Half 1000baseT/Full
         Advertised pause frame use: Symmetric
         Advertised auto-negotiation: Yes
         Speed: Unknown!
         Duplex: Unknown! (255)
         Port: Twisted Pair
         PHYAD: 1
         Transceiver: internal
         Auto-negotiation: on
         MDI-X: Unknown

$ sudo ip link set p1p1 up
RTNETLINK answers: No such device

> If I see things correctly, there were only two patches affecting tg3
> between 3.17(.3) and 3.18:
>
> 2c7c9ea429ba30fe506747b7da110e2212d8fefa
> a620a6bc1c94c22d6c312892be1e0ae171523125

I'm running net-next, 395eea6ccf2b253f81b4718ffbcae67d36fe2e69.
So my diffs would be:
$ git log v3.17..origin/master --oneline -- drivers/net/ethernet/broadcom/tg3.c
892311f ethtool: Support for configurable RSS hash function
60b7379 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
a620a6b tg3: fix ring init when there are more TX than RX channels
3964835 tg3: use netdev_rss_key_fill() helper
2c7c9ea tg3: Add skb->xmit_more support

Reverting all these, issue continues.

If no one has a better shot, I'll try bissecting later.

   Marcelo

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html