netdev - Re: [PATCH net-next v9 0/3] add hisilicon hip04 ethernet driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Tue, 16 Dec 2014 18:08:32 +0800
From:	Ding Tianhong <dingtianhong@...wei.com>
To:	Arnd Bergmann <arnd@...db.de>
CC:	<linux-arm-kernel@...ts.infradead.org>, <zhangfei.gao@...aro.org>,
	<davem@...emloft.net>, <linux@....linux.org.uk>,
	<f.fainelli@...il.com>, <sergei.shtylyov@...entembedded.com>,
	<mark.rutland@....com>, <David.Laight@...lab.com>,
	<eric.dumazet@...il.com>, <xuwei5@...ilicon.com>,
	<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH net-next v9 0/3] add hisilicon hip04 ethernet driver

On 2014/12/16 16:54, Arnd Bergmann wrote:
> On Tuesday 16 December 2014 15:57:21 Ding Tianhong wrote:
>> On 2014/12/15 21:29, Arnd Bergmann wrote:
>>> On Thursday 11 December 2014 19:42:27 Ding Tianhong wrote:
>>> @@ -381,57 +392,37 @@ static void hip04_tx_reclaim(struct net_device *ndev, bool force)
>>>  		dev_kfree_skb(priv->tx_skb[tx_tail]);
>>>  		priv->tx_skb[tx_tail] = NULL;
>>>  		tx_tail = TX_NEXT(tx_tail);
>>> -		priv->tx_count--;
>>> -
>>> -		if (priv->tx_count <= 0)
>>> -			break;
>>> +		count--;
>>>  	}
>>>  
> ...
>>> -	queue_delayed_work(priv->wq, &priv->tx_clean_task, delta_in_ticks);
>>> +	return count;
>>
>> I think should return pkts_compl, because may break from the loop, the
>> pkts_compl may smaller than count.
> 
> The calling convention I used is to return the packets that are remaining
> on the queue. Only if that is nonzero we need to reschedule the timer.
> 

OK, agree.

>> and we need to add netif_tx_lock() to protect this function to avoid concurrency conflict.
> 
> Oh, did I miss something? The idea was that the start_xmit function only updates
> the tx_head pointer and reads the tx_tail, while the tx_reclaim function does
> the reverse, and writes to a different cache line, in order to allow a lockless
> queue traversal.
> 
> Can you point to a specific struct member that still need to be protected by
> the lock? Did I miss a race that would allow both functions to exit with
> the timer disabled and entries left on the queue?
> 
OK, got it, no problem.

>>> @@ -623,8 +648,6 @@ static int hip04_mac_stop(struct net_device *ndev)
>>>  	struct hip04_priv *priv = netdev_priv(ndev);
>>>  	int i;
>>>  
>>> -	cancel_delayed_work_sync(&priv->tx_clean_task);
>>> -
>> I think we should cancle the hrtimer when closed and queue the timer when open.
> 
> I was expecting that force-cleaning up the tx queue would be enough for that.
> It it not?
> 
> I suppose it can't hurt to cancel the timer here anyway, and maybe use
> WARN_ON() if it's still active.
> 

Ok, I found no need to worry about this, when the dev is closed, the napi will disable and will not enter timer again.

> Starting the timer after opening seems wrong though: at that point there are
> no packets on the queue yet. The timer should always start ticking at the
> exact point when the first packet is put on the queue while the timer is
> not already pending.
> 
Ok.

>>>  	napi_disable(&priv->napi);
>>>  	netif_stop_queue(ndev);
>>>  	hip04_mac_disable(ndev);
>>> @@ -725,6 +748,7 @@ static int hip04_mac_probe(struct platform_device *pdev)
>>>  	struct hip04_priv *priv;
>>>  	struct resource *res;
>>>  	unsigned int irq;
>>> +	ktime_t txtime;
>>>  	int ret;
>>>  
>>>  	ndev = alloc_etherdev(sizeof(struct hip04_priv));
>>> @@ -751,6 +775,21 @@ static int hip04_mac_probe(struct platform_device *pdev)
>>>  	priv->port = arg.args[0];
>>>  	priv->chan = arg.args[1] * RX_DESC_NUM;
>>>  
>>> +	hrtimer_init(&priv->tx_coalesce_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
>>> +
>>> +	/*
>>> +	 * BQL will try to keep the TX queue as short as possible, but it can't
>>> +	 * be faster than tx_coalesce_usecs, so we need a fast timeout here,
>>> +	 * but also long enough to gather up enough frames to ensure we don't
>>> +	 * get more interrupts than necessary.
>>> +	 * 200us is enough for 16 frames of 1500 bytes at gigabit ethernet rate
>>> +	 */
>>> +	priv->tx_coalesce_frames = TX_DESC_NUM * 3 / 4;
>>> +	priv->tx_coalesce_usecs = 200;
>>> +	/* allow timer to fire after half the time at the earliest */
>>> +	txtime = ktime_set(0, priv->tx_coalesce_usecs * NSEC_PER_USEC / 2);
>>> +	hrtimer_set_expires_range(&priv->tx_coalesce_timer, txtime, txtime);
>>> +
>>
>> I think miss the line:
>>  priv->tx_coalesce_timer.function = tx_done;
> 
> Yes, good point.
> 

I will send v10 when the net-next open again, and these days will test this driver, thanks a lot.

Ding

> 	Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html