[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 01 Jan 2015 03:06:31 +0100
From: Heiko Stübner <heiko@...ech.de>
To: David Miller <davem@...emloft.net>
Cc: roger.chen@...k-chips.com, peppe.cavallaro@...com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org, kever.yang@...k-chips.com,
eddie.cai@...k-chips.com
Subject: Re: [PATCH v3 0/6] support GMAC driver for RK3288
Hi David,
Am Mittwoch, 31. Dezember 2014, 19:15:38 schrieb David Miller:
> From: Roger Chen <roger.chen@...k-chips.com>
> Date: Mon, 29 Dec 2014 17:42:32 +0800
>
> > Roger Chen (6):
> > patch1: add driver for Rockchip RK3288 SoCs integrated GMAC
> > patch2: define clock ID used for GMAC
> > patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC
> > patch4: dts: rockchip: add gmac info for rk3288
> > patch5: dts: rockchip: enable gmac on RK3288 evb board
> > patch6: add document for Rockchip RK3288 GMAC
> >
> > Tested on rk3288 evb board:
> > Execute the following command to enable ethernet,
> > set local IP and ping a remote host.
> >
> > busybox ifconfig eth0 up
> > busybox ifconfig eth0 192.168.1.111
> > ping 192.168.1.1
>
> Series applied to net-next, thanks.
could we split this up a bit instead?
If everything goes through your tree, we'll end up with a lot of conflicts with
other pending stuff, so I'd really appreciate if you could leave out patches
patch2: define clock ID used for GMAC
patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC
patch4: dts: rockchip: add gmac info for rk3288
patch5: dts: rockchip: enable gmac on RK3288 evb board
so only take the driver itself and the dt-binding and I would take these 4
above through the appropriate trees (clk and arm-soc)
Thanks and happy new year
Heiko
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists