| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1421324368-6860-17-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 15 Jan 2015 04:19:27 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Neerav Parikh <neerav.parikh@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 16/17] i40e: Support for NPAR iSCSI partition with DCB
From: Neerav Parikh <neerav.parikh@...el.com>
Add parsing and reporting of iSCSI capability for a given device or
function.
Also add support for iSCSI partition type with DCB in NPAR mode.
In this mode it is expected that software would configure both the LAN
and iSCSI traffic classes for the iSCSI partition; whereas all the NIC
type partitions will use LAN TC (TC0) only.
Hence, the patch enables querying of DCB configuration in MFP mode and
configures TCs for iSCSI partition type.
Though NIC type partitions may not have more than 1 TC enabled for them
the port may have multiple TCs enabled and hence I40E_FLAG_DCB_ENABLED
will be set/reset on all the partitions based on number of TCs on the
port. This is required as in DCB environment it is expected that all
traffic will be priority tagged.
Change-ID: I8c6e1cfd46c46d8a39c57d9020d9ff8d42ed8a7d
Signed-off-by: Neerav Parikh <neerav.parikh@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_common.c | 5 ++
drivers/net/ethernet/intel/i40e/i40e_main.c | 73 ++++++++++++++++++++-------
drivers/net/ethernet/intel/i40e/i40e_type.h | 1 +
drivers/net/ethernet/intel/i40evf/i40e_type.h | 1 +
4 files changed, 62 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 4f4d9d1..5669bfa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -2360,6 +2360,7 @@ i40e_aq_erase_nvm_exit:
#define I40E_DEV_FUNC_CAP_VSI 0x17
#define I40E_DEV_FUNC_CAP_DCB 0x18
#define I40E_DEV_FUNC_CAP_FCOE 0x21
+#define I40E_DEV_FUNC_CAP_ISCSI 0x22
#define I40E_DEV_FUNC_CAP_RSS 0x40
#define I40E_DEV_FUNC_CAP_RX_QUEUES 0x41
#define I40E_DEV_FUNC_CAP_TX_QUEUES 0x42
@@ -2459,6 +2460,10 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff,
if (number == 1)
p->fcoe = true;
break;
+ case I40E_DEV_FUNC_CAP_ISCSI:
+ if (number == 1)
+ p->iscsi = true;
+ break;
case I40E_DEV_FUNC_CAP_RSS:
p->rss = true;
p->rss_table_size = number;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d7efc1c..f1256f9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4002,6 +4002,35 @@ static int i40e_pf_wait_txq_disabled(struct i40e_pf *pf)
#endif
/**
+ * i40e_get_iscsi_tc_map - Return TC map for iSCSI APP
+ * @pf: pointer to pf
+ *
+ * Get TC map for ISCSI PF type that will include iSCSI TC
+ * and LAN TC.
+ **/
+static u8 i40e_get_iscsi_tc_map(struct i40e_pf *pf)
+{
+ struct i40e_dcb_app_priority_table app;
+ struct i40e_hw *hw = &pf->hw;
+ u8 enabled_tc = 1; /* TC0 is always enabled */
+ u8 tc, i;
+ /* Get the iSCSI APP TLV */
+ struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
+
+ for (i = 0; i < dcbcfg->numapps; i++) {
+ app = dcbcfg->app[i];
+ if (app.selector == I40E_APP_SEL_TCPIP &&
+ app.protocolid == I40E_APP_PROTOID_ISCSI) {
+ tc = dcbcfg->etscfg.prioritytable[app.priority];
+ enabled_tc |= (1 << tc);
+ break;
+ }
+ }
+
+ return enabled_tc;
+}
+
+/**
* i40e_dcb_get_num_tc - Get the number of TCs from DCBx config
* @dcbcfg: the corresponding DCBx configuration structure
*
@@ -4064,18 +4093,23 @@ static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
return 1;
+ /* SFP mode will be enabled for all TCs on port */
+ if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
+ return i40e_dcb_get_num_tc(dcbcfg);
+
/* MFP mode return count of enabled TCs for this PF */
- if (pf->flags & I40E_FLAG_MFP_ENABLED) {
+ if (pf->hw.func_caps.iscsi)
+ enabled_tc = i40e_get_iscsi_tc_map(pf);
+ else
enabled_tc = pf->hw.func_caps.enabled_tcmap;
- for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
- if (enabled_tc & (1 << i))
- num_tc++;
- }
- return num_tc;
- }
- /* SFP mode will be enabled for all TCs on port */
- return i40e_dcb_get_num_tc(dcbcfg);
+ /* At least have TC0 */
+ enabled_tc = (enabled_tc ? enabled_tc : 0x1);
+ for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
+ if (enabled_tc & (1 << i))
+ num_tc++;
+ }
+ return num_tc;
}
/**
@@ -4113,12 +4147,15 @@ static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
return i40e_pf_get_default_tc(pf);
- /* MFP mode will have enabled TCs set by FW */
- if (pf->flags & I40E_FLAG_MFP_ENABLED)
- return pf->hw.func_caps.enabled_tcmap;
-
/* SFP mode we want PF to be enabled for all TCs */
- return i40e_dcb_get_enabled_tc(&pf->hw.local_dcbx_config);
+ if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
+ return i40e_dcb_get_enabled_tc(&pf->hw.local_dcbx_config);
+
+ /* MPF enabled and iSCSI PF type */
+ if (pf->hw.func_caps.iscsi)
+ return i40e_get_iscsi_tc_map(pf);
+ else
+ return pf->hw.func_caps.enabled_tcmap;
}
/**
@@ -4508,9 +4545,6 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
struct i40e_hw *hw = &pf->hw;
int err = 0;
- if (pf->hw.func_caps.npar_enable)
- goto out;
-
/* Get the initial DCB configuration */
err = i40e_init_dcb(hw);
if (!err) {
@@ -7784,7 +7818,8 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
enabled_tc = i40e_pf_get_tc_map(pf);
/* MFP mode setup queue map and update VSI */
- if (pf->flags & I40E_FLAG_MFP_ENABLED) {
+ if ((pf->flags & I40E_FLAG_MFP_ENABLED) &&
+ !(pf->hw.func_caps.iscsi)) { /* NIC type PF */
memset(&ctxt, 0, sizeof(ctxt));
ctxt.seid = pf->main_vsi_seid;
ctxt.pf_num = pf->hw.pf_id;
@@ -7805,6 +7840,8 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
/* Default/Main VSI is only enabled for TC0
* reconfigure it to enable all TCs that are
* available on the port in SFP mode.
+ * For MFP case the iSCSI PF would use this
+ * flow to enable LAN+iSCSI TC.
*/
ret = i40e_vsi_config_tc(vsi, enabled_tc);
if (ret) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index ff121fe..e9901ef 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -211,6 +211,7 @@ struct i40e_hw_capabilities {
bool evb_802_1_qbh; /* Bridge Port Extension */
bool dcb;
bool fcoe;
+ bool iscsi; /* Indicates iSCSI enabled */
bool mfp_mode_1;
bool mgmt_cem;
bool ieee_1588;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index d1c2b5a..3d0fdaa 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -211,6 +211,7 @@ struct i40e_hw_capabilities {
bool evb_802_1_qbh; /* Bridge Port Extension */
bool dcb;
bool fcoe;
+ bool iscsi; /* Indicates iSCSI enabled */
bool mfp_mode_1;
bool mgmt_cem;
bool ieee_1588;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists