[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1421690889-11901-1-git-send-email-romain.perier@gmail.com>
Date: Mon, 19 Jan 2015 18:08:05 +0000
From: Romain Perier <romain.perier@...il.com>
To: peppe.cavallaro@...com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
heiko@...ech.de, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
roger.chen@...k-chips.com
Subject: [PATCH v1 0/4] net: stmmac: dwmac-rk: Fix phy regulator issues
This series fixes few issues in dwmac-rk:
1. Voltage settings was hardcoded into the driver for the phy regulator.
The driver now uses the default voltage settings found in the devicetree, which are
applied throught the regulator framework.
2. The regulator name used to power on or power off the phy was put in the devicetree
variable "phy_regulator", which is not standard and added a lot of code for nothing.
The driver now uses the devicetree property "phy-supply" and the corresponding functions
to manipulate this regulator.
The corresponding devicetree files are also updated. As, dwmac-rk was recently
pushed in the development tree, I don't care about devicetree backward compatibility
issues.
Romain Perier (4):
net: stmmac: dwmac-rk: Don't set the regulator voltage for phy from
the driver
ARM: dts: Add regulator voltage settings for vcc_phy in
rk3288-evb.dtsi
net: stmmac: dwmac-rk: Use standard devicetree property for phy
regulator
ARM: dts: Convert gmac to phy-supply in rk3288-evb-rk808.dts
arch/arm/boot/dts/rk3288-evb-rk808.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 62 ++++++++------------------
3 files changed, 22 insertions(+), 44 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists