| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CABgxDoLY3hkj5=QP1s8h4fotx7vSfOiP6xZd9L=t8ZffteO8QQ@mail.gmail.com>
Date: Tue, 20 Jan 2015 07:55:45 +0100
From: Romain Perier <romain.perier@...il.com>
To: Heiko Stübner <heiko@...ech.de>
Cc: peppe.cavallaro@...com, netdev <netdev@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
devicetree <devicetree@...r.kernel.org>,
roger.chen@...k-chips.com
Subject: Re: [PATCH v1 3/4] net: stmmac: dwmac-rk: Use standard devicetree
property for phy regulator
Hi,
Ok I will do these changes. However, the property "phy_regulator" was
not documented in
Documentation/devicetree/bindings/net/rockchip-dwmac.txt ... I can
document it anyway, it has probably been forgotten.
Thanks !
2015-01-19 21:12 GMT+01:00 Heiko Stübner <heiko@...ech.de>:
> Am Montag, 19. Januar 2015, 18:08:08 schrieb Romain Perier:
>> Currently, dwmac-rk uses a custom propety "phy_regulator" to get the name of
>> the right regulator to use to power on or power off the phy. This commit
>> converts the driver to use phy-supply devicetree property and the
>> corresponding API, it cleans the code a bit and make it simpler to
>> maintain.
>>
>> Signed-off-by: Romain Perier <romain.perier@...il.com>
>
> I don't see updated binding documentation in here.
>
> Secondly I think patch4 which changes the property in the evb-rk808 could be
> in here. The change is simple enough and would keep it bisectable without
> needing transistional patches.
>
> And there is the one warning down below.
>
>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 61
>> ++++++++------------------ 1 file changed, 19 insertions(+), 42
>> deletions(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>> b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 06e1637..8a8091c
>> 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>> @@ -32,7 +32,7 @@
>> struct rk_priv_data {
>> struct platform_device *pdev;
>> int phy_iface;
>> - char regulator[32];
>> + struct regulator *regulator;
>>
>> bool clk_enabled;
>> bool clock_input;
>> @@ -287,46 +287,25 @@ static int gmac_clk_enable(struct rk_priv_data
>> *bsp_priv, bool enable)
>>
>> static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
>> {
>> - struct regulator *ldo;
>> - char *ldostr = bsp_priv->regulator;
>> + struct regulator *ldo = bsp_priv->regulator;
>> int ret;
>> struct device *dev = &bsp_priv->pdev->dev;
>>
>> - if (!ldostr) {
>> - dev_err(dev, "%s: no ldo found\n", __func__);
>> + if (!ldo) {
>> + dev_err(dev, "%s: no regulator found\n", __func__);
>> return -1;
>> }
>>
>> - ldo = regulator_get(NULL, ldostr);
>> - if (!ldo) {
>> - dev_err(dev, "\n%s get ldo %s failed\n", __func__, ldostr);
>> + if (enable) {
>> + ret = regulator_enable(ldo);
>> + if (ret)
>> + dev_err(dev, "%s: fail to enable phy-supply\n",
>> + __func__);
>> } else {
>> - if (enable) {
>> - if (!regulator_is_enabled(ldo)) {
>> - ret = regulator_enable(ldo);
>> - if (ret != 0)
>> - dev_err(dev, "%s: fail to enable %s\n",
>> - __func__, ldostr);
>> - else
>> - dev_info(dev, "turn on ldo done.\n");
>> - } else {
>> - dev_warn(dev, "%s is enabled before enable",
>> - ldostr);
>> - }
>> - } else {
>> - if (regulator_is_enabled(ldo)) {
>> - ret = regulator_disable(ldo);
>> - if (ret != 0)
>> - dev_err(dev, "%s: fail to disable %s\n",
>> - __func__, ldostr);
>> - else
>> - dev_info(dev, "turn off ldo done.\n");
>> - } else {
>> - dev_warn(dev, "%s is disabled before disable",
>> - ldostr);
>> - }
>> - }
>> - regulator_put(ldo);
>> + ret = regulator_disable(ldo);
>> + if (ret)
>> + dev_err(dev, "%s: fail to disable phy-supply\n",
>> + __func__);
>> }
>>
>> return 0;
>> @@ -346,14 +325,12 @@ static void *rk_gmac_setup(struct platform_device
>> *pdev)
>>
>> bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
>>
>> - ret = of_property_read_string(dev->of_node, "phy_regulator", &strings);
>> - if (ret) {
>> - dev_warn(dev, "%s: Can not read property: phy_regulator.\n",
>> - __func__);
>> - } else {
>> - dev_info(dev, "%s: PHY power controlled by regulator(%s).\n",
>> - __func__, strings);
>> - strcpy(bsp_priv->regulator, strings);
>> + bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
>> + if (IS_ERR(bsp_priv->regulator)) {
>> + if (PTR_ERR(bsp_priv->regulator) == -EPROBE_DEFER)
>> + return -EPROBE_DEFER;
>
> this should be return ERR_PTR(-EPROBE_DEFER) and produces a warning in its
> current state
>
>
>> + dev_err(dev, "no regulator found\n");
>> + bsp_priv->regulator = NULL;
>> }
>>
>> ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists