[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1421737780-1533-2-git-send-email-romain.perier@gmail.com>
Date: Tue, 20 Jan 2015 07:09:37 +0000
From: Romain Perier <romain.perier@...il.com>
To: peppe.cavallaro@...com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
heiko@...ech.de, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
roger.chen@...k-chips.com
Subject: [PATCH v2 1/4] net: stmmac: dwmac-rk: Don't set the regulator voltage for phy from the driver
As these settings can be directly expressed from devicetree for both fixed
regulators and pmic-integrated regulators, it is more standard to set them
from dts and let the regulator framework use the right voltage informations
when it is used in the driver.
Signed-off-by: Romain Perier <romain.perier@...il.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 35f9b86..06e1637 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -303,7 +303,6 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
} else {
if (enable) {
if (!regulator_is_enabled(ldo)) {
- regulator_set_voltage(ldo, 3300000, 3300000);
ret = regulator_enable(ldo);
if (ret != 0)
dev_err(dev, "%s: fail to enable %s\n",
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists