lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <54BF6939.6050200@ti.com>
Date:	Wed, 21 Jan 2015 14:24:17 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	Peter Griffin <peter.griffin@...aro.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <srinivas.kandagatla@...il.com>,
	<maxime.coquelin@...com>, <patrice.chotard@...com>,
	<peppe.cavallaro@...com>, <arnd@...db.de>
CC:	<lee.jones@...aro.org>, <devicetree@...r.kernel.org>,
	<netdev@...r.kernel.org>
Subject: Re: [PATCH v2 0/7] Fix sti drivers whcih mix reg address spaces

Hi,

On Wednesday 07 January 2015 08:34 PM, Peter Griffin wrote:
> Hi folks,
> 
> A V2 of this old series incorporating Arnd and Lees Feedback form v1.
> 
> Following on from Arnds comments about the picophy driver here
> https://lkml.org/lkml/2014/11/13/161, this series fixes the
> remaining upstreamed drivers for STI, which are mixing address spaces
> in the reg property. We do this in a way similar to the keystone
> and bcm7445 platforms, by having sysconfig phandle/ offset pair 
> (where only one register is required). Or phandle / integer array
> where multiple offsets in the same bank are needed).
> 
> This series breaks DT compatability! But the platform support
> is WIP and only being used by the few developers who are upstreaming
> support for it. I've made each change to the driver / dt doc / dt
> file as a single atomic commit so the kernel will remain bisectable. 
> 
> This series then also enables the picophy driver, and adds back in
> the ehci/ohci dt nodes for stih410 which make use of the picophy.
> 
> regards,
> 
> Peter.
> 
> Changes since v1:
> - Add missing space after */ (Lee)
> - Change comment to "indexed from" rather than "not indexed from" (Lee)
> - Change naming to phy1, phy2 rather than phy@1 phy@2 if there is no reg property (Arnd / Grant)
> - Rebased on v3.19-rc3 (me)
> - Checkpatch "no space before tabs" warning in stih41*.dtsi (me)
> 
> Peter Griffin (7):
>   phy: phy-stih407-usb: Pass sysconfig register offsets via syscfg
>     property.
>   phy: miphy365x: Pass sysconfig register offsets via syscfg dt
>     property.
>   ARM: STi: DT: STiH407: Add usb2 picophy dt nodes
>   ARM: STi: DT: STiH410: Add usb2 picophy dt nodes
>   ARM: STi: DT: STiH410: Add DT nodes for the ehci and ohci usb
>     controllers.
>   ARM: multi_v7_defconfig: Enable stih407 usb picophy
>   stmmac: dwmac-sti: Pass sysconfig register offset via syscon dt
>     property.
> 
>  .../devicetree/bindings/net/sti-dwmac.txt          | 14 ++---
>  .../devicetree/bindings/phy/phy-miphy365x.txt      | 15 ++---
>  .../devicetree/bindings/phy/phy-stih407-usb.txt    | 10 +---
>  arch/arm/boot/dts/stih407-family.dtsi              |  9 +++
>  arch/arm/boot/dts/stih410.dtsi                     | 70 ++++++++++++++++++++++
>  arch/arm/boot/dts/stih415.dtsi                     | 12 ++--
>  arch/arm/boot/dts/stih416.dtsi                     | 22 +++----
>  arch/arm/configs/multi_v7_defconfig                |  1 +
>  drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c    | 13 ++--
>  drivers/phy/phy-miphy365x.c                        | 29 ++++-----
>  drivers/phy/phy-stih407-usb.c                      | 25 ++++----
>  11 files changed, 143 insertions(+), 77 deletions(-)
> 

Queued the first two patches of this series in linux-phy.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ