| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1422197983-16048-5-git-send-email-ogerlitz@mellanox.com>
Date: Sun, 25 Jan 2015 16:59:38 +0200
From: Or Gerlitz <ogerlitz@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Matan Barak <matanb@...lanox.com>,
Amir Vadai <amirv@...lanox.com>, Tal Alon <talal@...lanox.com>,
Roland Dreier <roland@...nel.org>,
Yishai Hadas <yishaih@...lanox.com>,
Or Gerlitz <ogerlitz@...lanox.com>
Subject: [PATCH V1 net-next 4/9] net/mlx4_core: Enhance the catas flow to support device reset
From: Yishai Hadas <yishaih@...lanox.com>
This includes:
- resetting the chip when a fatal error is detected (the current code
does not do this).
- exposing the ability to enter error state from outside the catas code
by calling its functionality. (E.g. FW Command timeout, AER error).
- managing a persistent device state. This is needed to sync between
reset flow cases.
Signed-off-by: Yishai Hadas <yishaih@...lanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/catas.c | 122 +++++++++++++++++++++-------
drivers/net/ethernet/mellanox/mlx4/main.c | 6 ++
drivers/net/ethernet/mellanox/mlx4/mlx4.h | 2 +-
include/linux/mlx4/device.h | 7 ++
4 files changed, 108 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/catas.c b/drivers/net/ethernet/mellanox/mlx4/catas.c
index 5bb9aa6..588d6b5 100644
--- a/drivers/net/ethernet/mellanox/mlx4/catas.c
+++ b/drivers/net/ethernet/mellanox/mlx4/catas.c
@@ -48,6 +48,83 @@ MODULE_PARM_DESC(internal_err_reset,
"Reset device on internal errors if non-zero"
" (default 1, in SRIOV mode default is 0)");
+static int read_vendor_id(struct mlx4_dev *dev)
+{
+ u16 vendor_id = 0;
+ int ret;
+
+ ret = pci_read_config_word(dev->persist->pdev, 0, &vendor_id);
+ if (ret) {
+ mlx4_err(dev, "Failed to read vendor ID, ret=%d\n", ret);
+ return ret;
+ }
+
+ if (vendor_id == 0xffff) {
+ mlx4_err(dev, "PCI can't be accessed to read vendor id\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mlx4_reset_master(struct mlx4_dev *dev)
+{
+ int err = 0;
+
+ if (!pci_channel_offline(dev->persist->pdev)) {
+ err = read_vendor_id(dev);
+ /* If PCI can't be accessed to read vendor ID we assume that its
+ * link was disabled and chip was already reset.
+ */
+ if (err)
+ return 0;
+
+ err = mlx4_reset(dev);
+ if (err)
+ mlx4_err(dev, "Fail to reset HCA\n");
+ }
+
+ return err;
+}
+
+void mlx4_enter_error_state(struct mlx4_dev_persistent *persist)
+{
+ int err;
+ struct mlx4_dev *dev;
+
+ if (!internal_err_reset)
+ return;
+
+ mutex_lock(&persist->device_state_mutex);
+ if (persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR)
+ goto out;
+
+ dev = persist->dev;
+ mlx4_err(dev, "device is going to be reset\n");
+ err = mlx4_reset_master(dev);
+ BUG_ON(err != 0);
+
+ dev->persist->state |= MLX4_DEVICE_STATE_INTERNAL_ERROR;
+ mlx4_err(dev, "device was reset successfully\n");
+ mutex_unlock(&persist->device_state_mutex);
+
+ /* At that step HW was already reset, now notify clients */
+ mlx4_dispatch_event(dev, MLX4_DEV_EVENT_CATASTROPHIC_ERROR, 0);
+ return;
+
+out:
+ mutex_unlock(&persist->device_state_mutex);
+}
+
+static void mlx4_handle_error_state(struct mlx4_dev_persistent *persist)
+{
+ int err = 0;
+
+ mlx4_enter_error_state(persist);
+ err = mlx4_restart_one(persist->pdev);
+ mlx4_info(persist->dev, "mlx4_restart_one was ended, ret=%d\n", err);
+}
+
static void dump_err_buf(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -66,21 +143,22 @@ static void poll_catas(unsigned long dev_ptr)
struct mlx4_priv *priv = mlx4_priv(dev);
if (readl(priv->catas_err.map)) {
- /* If the device is off-line, we cannot try to recover it */
- if (pci_channel_offline(dev->persist->pdev))
- mod_timer(&priv->catas_err.timer,
- round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
- else {
- dump_err_buf(dev);
- mlx4_dispatch_event(dev, MLX4_DEV_EVENT_CATASTROPHIC_ERROR, 0);
-
- if (internal_err_reset)
- queue_work(dev->persist->catas_wq,
- &dev->persist->catas_work);
- }
- } else
- mod_timer(&priv->catas_err.timer,
- round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
+ dump_err_buf(dev);
+ goto internal_err;
+ }
+
+ if (dev->persist->state & MLX4_DEVICE_STATE_INTERNAL_ERROR) {
+ mlx4_warn(dev, "Internal error mark was detected on device\n");
+ goto internal_err;
+ }
+
+ mod_timer(&priv->catas_err.timer,
+ round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
+ return;
+
+internal_err:
+ if (internal_err_reset)
+ queue_work(dev->persist->catas_wq, &dev->persist->catas_work);
}
static void catas_reset(struct work_struct *work)
@@ -88,20 +166,8 @@ static void catas_reset(struct work_struct *work)
struct mlx4_dev_persistent *persist =
container_of(work, struct mlx4_dev_persistent,
catas_work);
- struct pci_dev *pdev = persist->pdev;
- int ret;
-
- /* If the device is off-line, we cannot reset it */
- if (pci_channel_offline(pdev))
- return;
- ret = mlx4_restart_one(pdev);
- /* 'priv' now is not valid */
- if (ret)
- pr_err("mlx4 %s: Reset failed (%d)\n",
- pci_name(pdev), ret);
- else
- mlx4_dbg(persist->dev, "Reset succeeded\n");
+ mlx4_handle_error_state(persist);
}
void mlx4_start_catas_poll(struct mlx4_dev *dev)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index a61694c..dc2d910 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2624,6 +2624,11 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data,
}
}
+ /* on load remove any previous indication of internal error,
+ * device is up.
+ */
+ dev->persist->state = MLX4_DEVICE_STATE_UP;
+
slave_start:
err = mlx4_cmd_init(dev);
if (err) {
@@ -3108,6 +3113,7 @@ static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
dev->persist->dev = dev;
pci_set_drvdata(pdev, dev->persist);
priv->pci_dev_data = id->driver_data;
+ mutex_init(&dev->persist->device_state_mutex);
ret = __mlx4_init_one(pdev, id->driver_data, priv);
if (ret) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index d41af84..aa1ecbc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -1178,7 +1178,7 @@ void mlx4_qp_event(struct mlx4_dev *dev, u32 qpn, int event_type);
void mlx4_srq_event(struct mlx4_dev *dev, u32 srqn, int event_type);
-void mlx4_handle_catas_err(struct mlx4_dev *dev);
+void mlx4_enter_error_state(struct mlx4_dev_persistent *persist);
int mlx4_SENSE_PORT(struct mlx4_dev *dev, int port,
enum mlx4_port_type *type);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index da425d2..7d5d317 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -411,6 +411,11 @@ enum {
MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK = 1 << 4,
};
+enum {
+ MLX4_DEVICE_STATE_UP = 1 << 0,
+ MLX4_DEVICE_STATE_INTERNAL_ERROR = 1 << 1,
+};
+
#define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \
MLX4_EQ_PORT_INFO_MSTR_SM_LID_CHANGE_MASK)
@@ -753,6 +758,8 @@ struct mlx4_dev_persistent {
enum mlx4_port_type curr_port_poss_type[MLX4_MAX_PORTS + 1];
struct work_struct catas_work;
struct workqueue_struct *catas_wq;
+ struct mutex device_state_mutex; /* protect HW state */
+ u8 state;
};
struct mlx4_dev {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists