netdev - Re: [PATCH] drivers: net: xgene: fix: Out of order descriptor bytes read

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAKh23FmxvV82mVrHq5jv-FE+e6u6CkW+xL_a2_ULAQgP_mM2VA@mail.gmail.com>
Date:	Mon, 26 Jan 2015 13:12:23 -0800
From:	Iyappan Subramanian <isubramanian@....com>
To:	Eric Dumazet <eric.dumazet@...il.com>
Cc:	David Miller <davem@...emloft.net>,
	netdev <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>, mlangsdo@...hat.com,
	patches <patches@....com>, Keyur Chudgar <kchudgar@....com>
Subject: Re: [PATCH] drivers: net: xgene: fix: Out of order descriptor bytes read

On Thu, Jan 22, 2015 at 2:50 PM, Eric Dumazet <eric.dumazet@...il.com> wrote:
> On Thu, 2015-01-22 at 12:03 -0800, Iyappan Subramanian wrote:
>> This patch fixes the following kernel crash,
>>
>>       WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c()
>>       Call trace:
>
>>
>> Software writes poison data into the descriptor bytes[15:8] and upon
>> receiving the interrupt, if those bytes are overwritten by the hardware with
>> the valid data, software also reads bytes[7:0] and executes receive/tx
>> completion logic.
>>
>> If the CPU executes the above two reads in out of order fashion, then the
>> bytes[7:0] will have older data and causing the kernel panic.  We have to
>> force the order of the reads and thus this patch introduces read memory
>> barrier between these reads.
>>
>> Signed-off-by: Iyappan Subramanian <isubramanian@....com>
>> Signed-off-by: Keyur Chudgar <kchudgar@....com>
>> Tested-by: Mark Langsdorf <mlangsdo@...hat.com>
>> ---
>>  drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> index 83a5028..3622cdb 100644
>> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> @@ -369,6 +369,8 @@ static int xgene_enet_process_ring(struct xgene_enet_desc_ring *ring,
>>               if (unlikely(xgene_enet_is_desc_slot_empty(raw_desc)))
>>                       break;
>>
>> +             /* read fpqnum field after dataaddr field */
>> +             smp_rmb();
>>               if (is_rx_desc(raw_desc))
>>                       ret = xgene_enet_rx_frame(ring, raw_desc);
>>               else
>
> Reading your changelog, it looks like you need a plain rmb() here.

rmb() translates into dsb, which in arm64 serializes everything
including instructions and thus expensive compared to dmb.

Do you see any issue with smp_rmb() (which translates into dmb) ?

>
>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html