| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <54CB661A.7050706@ti.com>
Date: Fri, 30 Jan 2015 16:38:10 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Maxime Coquelin <maxime.coquelin@...com>,
Peter Griffin <peter.griffin@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <srinivas.kandagatla@...il.com>,
<patrice.chotard@...com>, <peppe.cavallaro@...com>, <arnd@...db.de>
CC: <lee.jones@...aro.org>, <devicetree@...r.kernel.org>,
<netdev@...r.kernel.org>
Subject: Re: [PATCH v2 2/7] phy: miphy365x: Pass sysconfig register offsets
via syscfg dt property.
Hi,
On Friday 30 January 2015 04:18 PM, Maxime Coquelin wrote:
> Hi Kishon,
>
> On 01/30/2015 11:35 AM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Wednesday 07 January 2015 08:34 PM, Peter Griffin wrote:
>>> Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161,
>>> update the miphy365 phy driver to access sysconfig register offsets via
>>> syscfg dt property.
>>>
>>> This is because the reg property should not be mixing address spaces
>>> like it does currently for miphy365. This change then also aligns us
>>> to how other platforms such as keystone and bcm7445 pass there syscon
>>> offsets via DT.
>>>
>>> This patch breaks DT compatibility, but this platform is considered WIP,
>>> and is only used by a few developers who are upstreaming support for it.
>>> This change has been done as a single atomic commit to ensure it is
>>> bisectable.
>> I'm dropping this from my tree since I didn't get Ack from
>> "arch/arm/boot/dts/stih416.dtsi" Maintainer.
> Sorry, on cover letter, I replied the series looked good to me.
> So you can add:
>
> Acked-by: Maxime Coquelin <maxime.coquelin@...com>
>
> And even:
>
> Tested-by: Maxime Coquelin <maxime.coquelin@...com>
Thanks. I'll merge them now.
I'd assume there won't be any conflicts when it gets merged to linus tree.
Cheers
Kishon
>
> Kind regards,
> Maxime
>
>>
>> Thanks
>> Kishon
>>> Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
>>> Reviewed-by: Arnd Bergmann <arnd@...db.de>
>>> ---
>>> .../devicetree/bindings/phy/phy-miphy365x.txt | 15 +++++------
>>> arch/arm/boot/dts/stih416.dtsi | 10 ++++----
>>> drivers/phy/phy-miphy365x.c | 29
>>> ++++++++--------------
>>> 3 files changed, 23 insertions(+), 31 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> index 42c8808..9802d5d 100644
>>> --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> @@ -6,8 +6,10 @@ for SATA and PCIe.
>>> Required properties (controller (parent) node):
>>> - compatible : Should be "st,miphy365x-phy"
>>> -- st,syscfg : Should be a phandle of the system configuration register
>>> group
>>> - which contain the SATA, PCIe mode setting bits
>>> +- st,syscfg : Phandle / integer array property. Phandle of sysconfig group
>>> + containing the miphy registers and integer array should contain
>>> + an entry for each port sub-node, specifying the control
>>> + register offset inside the sysconfig group.
>>> Required nodes : A sub-node is required for each channel the controller
>>> provides. Address range information including the usual
>>> @@ -26,7 +28,6 @@ Required properties (port (child) node):
>>> registers filled in "reg":
>>> - sata: For SATA devices
>>> - pcie: For PCIe devices
>>> - - syscfg: To specify the syscfg based config register
>>> Optional properties (port (child) node):
>>> - st,sata-gen : Generation of locally attached SATA IP.
>>> Expected values
>>> @@ -39,20 +40,20 @@ Example:
>>> miphy365x_phy: miphy365x@...82000 {
>>> compatible = "st,miphy365x-phy";
>>> - st,syscfg = <&syscfg_rear>;
>>> + st,syscfg = <&syscfg_rear 0x824 0x828>;
>>> #address-cells = <1>;
>>> #size-cells = <1>;
>>> ranges;
>>> phy_port0: port@...82000 {
>>> - reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
>>> - reg-names = "sata", "pcie", "syscfg";
>>> + reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
>>> + reg-names = "sata", "pcie";
>>> #phy-cells = <1>;
>>> st,sata-gen = <3>;
>>> };
>>> phy_port1: port@...8a000 {
>>> - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
>>> + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
>>> reg-names = "sata", "pcie", "syscfg";
>>> #phy-cells = <1>;
>>> st,pcie-tx-pol-inv;
>>> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
>>> index fad9073..85afe01 100644
>>> --- a/arch/arm/boot/dts/stih416.dtsi
>>> +++ b/arch/arm/boot/dts/stih416.dtsi
>>> @@ -283,21 +283,21 @@
>>> miphy365x_phy: phy@...82000 {
>>> compatible = "st,miphy365x-phy";
>>> - st,syscfg = <&syscfg_rear>;
>>> + st,syscfg = <&syscfg_rear 0x824 0x828>;
>>> #address-cells = <1>;
>>> #size-cells = <1>;
>>> ranges;
>>> phy_port0: port@...82000 {
>>> #phy-cells = <1>;
>>> - reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
>>> - reg-names = "sata", "pcie", "syscfg";
>>> + reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
>>> + reg-names = "sata", "pcie";
>>> };
>>> phy_port1: port@...8a000 {
>>> #phy-cells = <1>;
>>> - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
>>> - reg-names = "sata", "pcie", "syscfg";
>>> + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
>>> + reg-names = "sata", "pcie";
>>> };
>>> };
>>> diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
>>> index 6ab43a8..6c80154 100644
>>> --- a/drivers/phy/phy-miphy365x.c
>>> +++ b/drivers/phy/phy-miphy365x.c
>>> @@ -141,7 +141,7 @@ struct miphy365x_phy {
>>> bool pcie_tx_pol_inv;
>>> bool sata_tx_pol_inv;
>>> u32 sata_gen;
>>> - u64 ctrlreg;
>>> + u32 ctrlreg;
>>> u8 type;
>>> };
>>> @@ -179,7 +179,7 @@ static int miphy365x_set_path(struct miphy365x_phy
>>> *miphy_phy,
>>> bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
>>> return regmap_update_bits(miphy_dev->regmap,
>>> - (unsigned int)miphy_phy->ctrlreg,
>>> + miphy_phy->ctrlreg,
>>> SYSCFG_SELECT_SATA_MASK,
>>> sata << SYSCFG_SELECT_SATA_POS);
>>> }
>>> @@ -445,7 +445,6 @@ int miphy365x_get_addr(struct device *dev, struct
>>> miphy365x_phy *miphy_phy,
>>> {
>>> struct device_node *phynode = miphy_phy->phy->dev.of_node;
>>> const char *name;
>>> - const __be32 *taddr;
>>> int type = miphy_phy->type;
>>> int ret;
>>> @@ -455,22 +454,6 @@ int miphy365x_get_addr(struct device *dev, struct
>>> miphy365x_phy *miphy_phy,
>>> return ret;
>>> }
>>> - if (!strncmp(name, "syscfg", 6)) {
>>> - taddr = of_get_address(phynode, index, NULL, NULL);
>>> - if (!taddr) {
>>> - dev_err(dev, "failed to fetch syscfg address\n");
>>> - return -EINVAL;
>>> - }
>>> -
>>> - miphy_phy->ctrlreg = of_translate_address(phynode, taddr);
>>> - if (miphy_phy->ctrlreg == OF_BAD_ADDR) {
>>> - dev_err(dev, "failed to translate syscfg address\n");
>>> - return -EINVAL;
>>> - }
>>> -
>>> - return 0;
>>> - }
>>> -
>>> if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
>>> (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
>>> return 0;
>>> @@ -606,7 +589,15 @@ static int miphy365x_probe(struct platform_device *pdev)
>>> return ret;
>>> phy_set_drvdata(phy, miphy_dev->phys[port]);
>>> +
>>> port++;
>>> + /* sysconfig offsets are indexed from 1 */
>>> + ret = of_property_read_u32_index(np, "st,syscfg", port,
>>> + &miphy_phy->ctrlreg);
>>> + if (ret) {
>>> + dev_err(&pdev->dev, "No sysconfig offset found\n");
>>> + return ret;
>>> + }
>>> }
>>> provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate);
>>>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists